summaryrefslogtreecommitdiff
path: root/include/soc/imx
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2017-02-04 20:02:50 +0100
committerDavid S. Miller <davem@davemloft.net>2017-02-07 10:34:43 -0500
commitf39908d3b1c45208c6898550167bfa766fdd6bb8 (patch)
tree5e00ed6ca1dcce0006abf5176f514027a3706b67 /include/soc/imx
parent55601a880690cdeccdb5923c2493f0e3736f8f6b (diff)
net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10
Unlike most ports, ports 9 and 10 of the 6390X family have configurable PHY modes. Set the mode as part of adjust_link(). Ordering is important, because the SERDES interfaces connected to ports 9 and 10 can be split and assigned to other ports. The CMODE has to be correctly set before the SERDES interface on another port can be configured. Such configuration is likely to be performed in port_enable() and port_disabled(), called on slave_open() and slave_close(). The simple case is port 9 and 10 are used for 'CPU' or 'DSA'. In this case, the CMODE is set via a phy-mode in dsa_cpu_dsa_setup(), which is called early in the switch setup. When ports 9 or 10 are used as user ports, and have a fixed-phy, when the fixed fixed-phy is attached, dsa_slave_adjust_link() is called, which results in the adjust_link function being called, setting the cmode. The port_enable() will for other ports will be called much later. When ports 9 or 10 are used as user ports and have a real phy attached which does not use all the available SERDES interface, e.g. a 1Gbps SGMII, there is currently no mechanism in place to set the CMODE of the port from software. It must be hoped the stripping resistors are correct. At the same time, add a function to get the cmode. This will be needed when configuring the SERDES interfaces. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/soc/imx')
0 files changed, 0 insertions, 0 deletions