summaryrefslogtreecommitdiff
path: root/include/uapi/misc/Kbuild
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/misc/Kbuild')
0 files changed, 0 insertions, 0 deletions
t.cgi/linux/net-next.git/commit/include/uapi?h=nds-private-remove&id=853a14ba4682f820266469979c9297debc05f60c'>net/act_pedit: Introduce 'add' operationAmir Vadai1-0/+8 This command could be useful to inc/dec fields. For example, to forward any TCP packet and decrease its TTL: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower ip_proto tcp \ action pedit munge ip ttl add 0xff pipe \ action mirred egress redirect dev veth0 In the example above, adding 0xff to this u8 field is actually decreasing it by one, since the operation is masked. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-10net/act_pedit: Support using offset relative to the conventional network headersAmir Vadai1-0/+23 Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09openvswitch: Add force commit.Jarno Rajahalme1-0/+5 Stateful network admission policy may allow connections to one direction and reject connections initiated in the other direction. After policy change it is possible that for a new connection an overlapping conntrack entry already exists, where the original direction of the existing connection is opposed to the new connection's initial packet. Most importantly, conntrack state relating to the current packet gets the "reply" designation based on whether the original direction tuple or the reply direction tuple matched. If this "directionality" is wrong w.r.t. to the stateful network admission policy it may happen that packets in neither direction are correctly admitted. This patch adds a new "force commit" option to the OVS conntrack action that checks the original direction of an existing conntrack entry. If that direction is opposed to the current packet, the existing conntrack entry is deleted and a new one is subsequently created in the correct direction. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09openvswitch: Add original direction conntrack tuple to sw_flow_key.Jarno Rajahalme1-1/+19 Add the fields of the conntrack original direction 5-tuple to struct sw_flow_key. The new fields are initially marked as non-existent, and are populated whenever a conntrack action is executed and either finds or generates a conntrack entry. This means that these fields exist for all packets that were not rejected by conntrack as untrackable. The original tuple fields in the sw_flow_key are filled from the original direction tuple of the conntrack entry relating to the current packet, or from the original direction tuple of the master conntrack entry, if the current conntrack entry has a master. Generally, expected connections of connections having an assigned helper (e.g., FTP), have a master conntrack entry. The main purpose of the new conntrack original tuple fields is to allow matching on them for policy decision purposes, with the premise that the admissibility of tracked connections reply packets (as well as original direction packets), and both direction packets of any related connections may be based on ACL rules applying to the master connection's original direction 5-tuple. This also makes it easier to make policy decisions when the actual packet headers might have been transformed by NAT, as the original direction 5-tuple represents the packet headers before any such transformation. When using the original direction 5-tuple the admissibility of return and/or related packets need not be based on the mere existence of a conntrack entry, allowing separation of admission policy from the established conntrack state. While existence of a conntrack entry is required for admission of the return or related packets, policy changes can render connections that were initially admitted to be rejected or dropped afterwards. If the admission of the return and related packets was based on mere conntrack state (e.g., connection being in an established state), a policy change that would make the connection rejected or dropped would need to find and delete all conntrack entries affected by such a change. When using the original direction 5-tuple matching the affected conntrack entries can be allowed to time out instead, as the established state of the connection would not need to be the basis for packet admission any more. It should be noted that the directionality of related connections may be the same or different than that of the master connection, and neither the original direction 5-tuple nor the conntrack state bits carry this information. If needed, the directionality of the master connection can be stored in master's conntrack mark or labels, which are automatically inherited by the expected related connections. The fact that neither ARP nor ND packets are trackable by conntrack allows mutual exclusion between ARP/ND and the new conntrack original tuple fields. Hence, the IP addresses are overlaid in union with ARP and ND fields. This allows the sw_flow_key to not grow much due to this patch, but it also means that we must be careful to never use the new key fields with ARP or ND packets. ARP is easy to distinguish and keep mutually exclusive based on the ethernet type, but ND being an ICMPv6 protocol requires a bit more attention. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09openvswitch: Unionize ovs_key_ct_label with a u32 array.Jarno Rajahalme1-2/+6 Make the array of labels in struct ovs_key_ct_label an union, adding a u32 array of the same byte size as the existing u8 array. It is faster to loop through the labels 32 bits at the time, which is also the alignment of netlink attributes. Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09sctp: implement sender-side procedures for Add Incoming/Outgoing Streams ↵Xin Long1-0/+7 Request Parameter This patch is to implement Sender-Side Procedures for the Add Outgoing and Incoming Streams Request Parameter described in rfc6525 section 5.1.5-5.1.6. It is also to add sockopt SCTP_ADD_STREAMS in rfc6525 section 6.3.4 for users. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09sctp: implement sender-side procedures for SSN/TSN Reset Request ParameterXin Long1-0/+1 This patch is to implement Sender-Side Procedures for the SSN/TSN Reset Request Parameter descibed in rfc6525 section 5.1.4. It is also to add sockopt SCTP_RESET_ASSOC in rfc6525 section 6.3.3 for users. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09cfg80211: fix NAN bands definitionLuca Coelho1-31/+26 The nl80211_nan_dual_band_conf enumeration doesn't make much sense. The default value is assigned to a bit, which makes it weird if the default bit and other bits are set at the same time. To improve this, get rid of NL80211_NAN_BAND_DEFAULT and add a wiphy configuration to let the drivers define which bands are supported. This is exposed to the userspace, which then can make a decision on which band(s) to use. Additionally, rename all "dual_band" elements to "bands", to make things clearer. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2017-02-08cfg80211: Pass new RSSI level in CQM RSSI notificationAndrzej Zaborowski1-0/+3 Update the drivers to pass the RSSI level as a cfg80211_cqm_rssi_notify parameter and pass this value to userspace in a new nl80211 attribute. This helps both userspace and also helps in the implementation of the multiple RSSI thresholds CQM mechanism. Note for marvell/mwifiex I pass 0 for the RSSI value because the new RSSI value is not available to the driver at the time of the cfg80211_cqm_rssi_notify call, but the driver queries the new value immediately after that, so it is actually available just a moment later if we wanted to defer caling cfg80211_cqm_rssi_notify until that moment. Without this, the new cfg80211 code (patch 3) will call .get_station which will send a duplicate HostCmd_CMD_RSSI_INFO command to the hardware. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller