* Texas Instruments - dp83867 Giga bit ethernet phy Required properties: - reg - The ID number for the phy, usually a small integer - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values Optional property: - ti,min-output-impedance - MAC Interface Impedance control to set the programmable output impedance to minimum value (35 ohms). - ti,max-output-impedance - MAC Interface Impedance control to set the programmable output impedance to maximum value (70 ohms). Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance takes precedence. Default child nodes are standard Ethernet PHY device nodes as described in Documentation/devicetree/bindings/net/phy.txt Example: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,tx-internal-delay = ; ti,fifo-depth = ; }; Datasheet can be found: http://www.ti.com/product/DP83867IR/datasheet summaryrefslogtreecommitdiff
AgeCommit message (Expand)AuthorFilesLines