/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *****************************************************************************/ #ifndef __iwl_fw_file_h__ #define __iwl_fw_file_h__ #include #include /* v1/v2 uCode file layout */ struct iwl_ucode_header { __le32 ver; /* major/minor/API/serial */ union { struct { __le32 inst_size; /* bytes of runtime code */ __le32 data_size; /* bytes of runtime data */ __le32 init_size; /* bytes of init code */ __le32 init_data_size; /* bytes of init data */ __le32 boot_size; /* bytes of bootstrap code */ u8 data[0]; /* in same order as sizes */ } v1; struct { __le32 build; /* build number */ __le32 inst_size; /* bytes of runtime code */ __le32 data_size; /* bytes of runtime data */ __le32 init_size; /* bytes of init code */ __le32 init_data_size; /* bytes of init data */ __le32 boot_size; /* bytes of bootstrap code */ u8 data[0]; /* in same order as sizes */ } v2; } u; }; /* * new TLV uCode file layout * * The new TLV file format contains TLVs, that each specify * some piece of data. */ enum iwl_ucode_tlv_type { IWL_UCODE_TLV_INVALID = 0, /* unused */ IWL_UCODE_TLV_INST = 1, IWL_UCODE_TLV_DATA = 2, IWL_UCODE_TLV_INIT = 3, IWL_UCODE_TLV_INIT_DATA = 4, IWL_UCODE_TLV_BOOT = 5, IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */ IWL_UCODE_TLV_PAN = 7, IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8, IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10, IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11, IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, IWL_UCODE_TLV_WOWLAN_INST = 16, IWL_UCODE_TLV_WOWLAN_DATA = 17, IWL_UCODE_TLV_FLAGS = 18, IWL_UCODE_TLV_SEC_RT = 19, IWL_UCODE_TLV_SEC_INIT = 20, IWL_UCODE_TLV_SEC_WOWLAN = 21, IWL_UCODE_TLV_DEF_CALIB = 22, IWL_UCODE_TLV_PHY_SKU = 23, IWL_UCODE_TLV_SECURE_SEC_RT = 24, IWL_UCODE_TLV_SECURE_SEC_INIT = 25, IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26, IWL_UCODE_TLV_NUM_OF_CPU = 27, IWL_UCODE_TLV_CSCHEME = 28, IWL_UCODE_TLV_API_CHANGES_SET = 29, IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30, IWL_UCODE_TLV_N_SCAN_CHANNELS = 31, IWL_UCODE_TLV_PAGING = 32, IWL_UCODE_TLV_SEC_RT_USNIFFER = 34, IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35, IWL_UCODE_TLV_FW_VERSION = 36, IWL_UCODE_TLV_FW_DBG_DEST = 38, IWL_UCODE_TLV_FW_DBG_CONF = 39, IWL_UCODE_TLV_FW_DBG_TRIGGER = 40, IWL_UCODE_TLV_FW_GSCAN_CAPA = 50, IWL_UCODE_TLV_FW_MEM_SEG = 51, }; struct iwl_ucode_tlv { __le32 type; /* see above */ __le32 length; /* not including type/length fields */ u8 data[0]; }; #define IWL_TLV_UCODE_MAGIC 0x0a4c5749 #define FW_VER_HUMAN_READABLE_SZ 64 struct iwl_tlv_ucode_header { /* * The TLV style ucode header is distinguished from * the v1/v2 style header by first four bytes being * zero, as such is an invalid combination of * major/minor/API/serial versions. */ __le32 zero; __le32 magic; u8 human_readable[FW_VER_HUMAN_READABLE_SZ]; /* major/minor/API/serial or major in new format */ __le32 ver; __le32 build; __le64 ignore; /* * The data contained herein has a TLV layout, * see above for the TLV header and types. * Note that each TLV is padded to a length * that is a multiple of 4 for alignment. */ u8 data[0]; }; /* * ucode TLVs * * ability to get extension for: flags & capabilities from ucode binaries files */ struct iwl_ucode_api { __le32 api_index; __le32 api_flags; } __packed; struct iwl_ucode_capa { __le32 api_index; __le32 api_capa; } __packed; /** * enum iwl_ucode_tlv_flag - ucode API flags * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously * was a separate TLV but moved here to save space. * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID, * treats good CRC threshold as a boolean * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan * offload profile config command. * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element * from the probe request template. * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. */ enum iwl_ucode_tlv_flag { IWL_UCODE_TLV_FLAGS_PAN = BIT(0), IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), IWL_UCODE_TLV_FLAGS_MFP = BIT(2), IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), }; typedef unsigned int __bitwise iwl_ucode_tlv_api_t; /** * enum iwl_ucode_tlv_api - ucode api * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format * @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan * iteration complete notification, and the timestamp reported for RX * received during scan, are reported in TSF of the mac specified in the * scan request. * * @NUM_IWL_UCODE_TLV_API: number of bits used */ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8, IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9, IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18, IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20, IWL_UCODE_TLV_API_SCAN_TSF_REPORT = (__force iwl_ucode_tlv_api_t)28, NUM_IWL_UCODE_TLV_API #ifdef __CHECKER__ /* sparse says it cannot increment the previous enum member */ = 128 #endif }; typedef unsigned int __bitwise iwl_ucode_tlv_capa_t; /** * enum iwl_ucode_tlv_capa - ucode capabilities * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM) * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current * tx power value into TPC Report action frame and Link Measurement Report * action frame * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current * channel in DS parameter set element in probe requests. * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in * probe requests. * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), * which also implies support for the scheduler configuration command * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching * @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics * @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it * is standalone or with a BSS station interface in the same binding. * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different * sources for the MCC. This TLV bit is a future replacement to * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR * is supported. * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA * countdown offloading. Beacon notifications are not sent to the host. * The fw also offloads TBTT alignment. * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what * antenna the beacon should be transmitted * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon * from AP and will send it upon d0i3 exit. * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2 * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature * thresholds reporting * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in * regular image. * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared * memory addresses from the firmware. * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger * command size (command version 4) that supports toggling ACK TX * power reduction. * * @NUM_IWL_UCODE_TLV_CAPA: number of bits used */ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0, IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1, IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2, IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3, IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5, IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6, IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8, IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9, IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10, IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11, IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12, IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13, IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG = (__force iwl_ucode_tlv_capa_t)17, IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18, IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19, IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21, IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22, IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD = (__force iwl_ucode_tlv_capa_t)26, IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28, IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29, IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30, IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31, IWL_UCODE_TLV_CAPA_STA_PM_NOTIF = (__force iwl_ucode_tlv_capa_t)38, IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64, IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65, IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT = (__force iwl_ucode_tlv_capa_t)67, IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT = (__force iwl_ucode_tlv_capa_t)68, IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD = (__force iwl_ucode_tlv_capa_t)70, IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = (__force iwl_ucode_tlv_capa_t)71, IWL_UCODE_TLV_CAPA_BEACON_STORING = (__force iwl_ucode_tlv_capa_t)72, IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2 = (__force iwl_ucode_tlv_capa_t)73, IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW = (__force iwl_ucode_tlv_capa_t)74, IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = (__force iwl_ucode_tlv_capa_t)75, IWL_UCODE_TLV_CAPA_CTDP_SUPPORT = (__force iwl_ucode_tlv_capa_t)76, IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED = (__force iwl_ucode_tlv_capa_t)77, IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = (__force iwl_ucode_tlv_capa_t)80, IWL_UCODE_TLV_CAPA_LQM_SUPPORT = (__force iwl_ucode_tlv_capa_t)81, IWL_UCODE_TLV_CAPA_TX_POWER_ACK = (__force iwl_ucode_tlv_capa_t)84, NUM_IWL_UCODE_TLV_CAPA #ifdef __CHECKER__ /* sparse says it cannot increment the previous enum member */ = 128 #endif }; /* The default calibrate table size if not specified by firmware file */ #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 /* The default max probe length if not specified by the firmware file */ #define IWL_DEFAULT_MAX_PROBE_LENGTH 200 /* * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address. */ #define IWL_UCODE_SECTION_MAX 16 #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC #define PAGING_SEPARATOR_SECTION 0xAAAABBBB /* uCode version contains 4 values: Major/Minor/API/Serial */ #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwl_tlv_calib_ctrl { __le32 flow_trigger; __le32 event_trigger; } __packed; enum iwl_fw_phy_cfg { FW_PHY_CFG_RADIO_TYPE_POS = 0, FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, FW_PHY_CFG_RADIO_STEP_POS = 2, FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, FW_PHY_CFG_RADIO_DASH_POS = 4, FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, FW_PHY_CFG_TX_CHAIN_POS = 16, FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, FW_PHY_CFG_RX_CHAIN_POS = 20, FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, }; #define IWL_UCODE_MAX_CS 1 /** * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW. * @cipher: a cipher suite selector * @flags: cipher scheme flags (currently reserved for a future use) * @hdr_len: a size of MPDU security header * @pn_len: a size of PN * @pn_off: an offset of pn from the beginning of the security header * @key_idx_off: an offset of key index byte in the security header * @key_idx_mask: a bit mask of key_idx bits * @key_idx_shift: bit shift needed to get key_idx * @mic_len: mic length in bytes * @hw_cipher: a HW cipher index used in host commands */ struct iwl_fw_cipher_scheme { __le32 cipher; u8 flags; u8 hdr_len; u8 pn_len; u8 pn_off; u8 key_idx_off; u8 key_idx_mask; u8 key_idx_shift; u8 mic_len; u8 hw_cipher; } __packed; enum iwl_fw_dbg_reg_operator { CSR_ASSIGN, CSR_SETBIT, CSR_CLEARBIT, PRPH_ASSIGN, PRPH_SETBIT, PRPH_CLEARBIT, INDIRECT_ASSIGN, INDIRECT_SETBIT, INDIRECT_CLEARBIT, PRPH_BLOCKBIT, }; /** * struct iwl_fw_dbg_reg_op - an operation on a register * * @op: %enum iwl_fw_dbg_reg_operator * @addr: offset of the register * @val: value */ struct iwl_fw_dbg_reg_op { u8 op; u8 reserved[3]; __le32 addr; __le32 val; } __packed; /** * enum iwl_fw_dbg_monitor_mode - available monitor recording modes * * @SMEM_MODE: monitor stores the data in SMEM * @EXTERNAL_MODE: monitor stores the data in allocated DRAM * @MARBH_MODE: monitor stores the data in MARBH buffer * @MIPI_MODE: monitor outputs the data through the MIPI interface */ enum iwl_fw_dbg_monitor_mode { SMEM_MODE = 0, EXTERNAL_MODE = 1, MARBH_MODE = 2, MIPI_MODE = 3, }; /** * enum iwl_fw_mem_seg_type - data types for dumping on error * * @FW_DBG_MEM_SMEM: the data type is SMEM * @FW_DBG_MEM_DCCM_LMAC: the data type is DCCM_LMAC * @FW_DBG_MEM_DCCM_UMAC: the data type is DCCM_UMAC */ enum iwl_fw_dbg_mem_seg_type { FW_DBG_MEM_DCCM_LMAC = 0, FW_DBG_MEM_DCCM_UMAC, FW_DBG_MEM_SMEM, /* Must be last */ FW_DBG_MEM_MAX, }; /** * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments * * @data_type: enum %iwl_fw_mem_seg_type * @ofs: the memory segment offset * @len: the memory segment length, in bytes * * This parses IWL_UCODE_TLV_FW_MEM_SEG */ struct iwl_fw_dbg_mem_seg_tlv { __le32 data_type; __le32 ofs; __le32 len; } __packed; /** * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data * * @version: version of the TLV - currently 0 * @monitor_mode: %enum iwl_fw_dbg_monitor_mode * @size_power: buffer size will be 2^(size_power + 11) * @base_reg: addr of the base addr register (PRPH) * @end_reg: addr of the end addr register (PRPH) * @write_ptr_reg: the addr of the reg of the write pointer * @wrap_count: the addr of the reg of the wrap_count * @base_shift: shift right of the base addr reg * @end_shift: shift right of the end addr reg * @reg_ops: array of registers operations * * This parses IWL_UCODE_TLV_FW_DBG_DEST */ struct iwl_fw_dbg_dest_tlv { u8 version; u8 monitor_mode; u8 size_power; u8 reserved; __le32 base_reg; __le32 end_reg; __le32 write_ptr_reg; __le32 wrap_count; u8 base_shift; u8 end_shift; struct iwl_fw_dbg_reg_op reg_ops[0]; } __packed; struct iwl_fw_dbg_conf_hcmd { u8 id; u8 reserved; __le16 len; u8 data[0]; } __packed; /** * enum iwl_fw_dbg_trigger_mode - triggers functionalities * * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to * collect only monitor data */ enum iwl_fw_dbg_trigger_mode { IWL_FW_DBG_TRIGGER_START = BIT(0), IWL_FW_DBG_TRIGGER_STOP = BIT(1), IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2), }; /** * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger * @IWL_FW_DBG_CONF_VIF_ANY: any vif type * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode * @IWL_FW_DBG_CONF_VIF_AP: AP mode * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device */ enum iwl_fw_dbg_trigger_vif_type { IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED, IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC, IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION, IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP, IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT, IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO, IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE, }; /** * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger * @id: %enum iwl_fw_dbg_trigger * @vif_type: %enum iwl_fw_dbg_trigger_vif_type * @stop_conf_ids: bitmap of configurations this trigger relates to. * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding * to the currently running configuration is set, the data should be * collected. * @stop_delay: how many milliseconds to wait before collecting the data * after the STOP trigger fires. * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what * configuration should be applied when the triggers kicks in. * @occurrences: number of occurrences. 0 means the trigger will never fire. * @trig_dis_ms: the time, in milliseconds, after an occurrence of this * trigger in which another occurrence should be ignored. */ struct iwl_fw_dbg_trigger_tlv { __le32 id; __le32 vif_type; __le32 stop_conf_ids; __le32 stop_delay; u8 mode; u8 start_conf_id; __le16 occurrences; __le16 trig_dis_ms; __le16 reserved[3]; u8 data[0]; } __packed; #define FW_DBG_START_FROM_ALIVE 0 #define FW_DBG_CONF_MAX 32 #define FW_DBG_INVALID 0xff /** * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons * @stop_consec_missed_bcon: stop recording if threshold is crossed. * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed. * @start_consec_missed_bcon: start recording if threshold is crossed. * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed. * @reserved1: reserved * @reserved2: reserved */ struct iwl_fw_dbg_trigger_missed_bcon { __le32 stop_consec_missed_bcon; __le32 stop_consec_missed_bcon_since_rx; __le32 reserved2[2]; __le32 start_consec_missed_bcon; __le32 start_consec_missed_bcon_since_rx; __le32 reserved1[2]; } __packed; /** * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW. * cmds: the list of commands to trigger the collection on */ struct iwl_fw_dbg_trigger_cmd { struct cmd { u8 cmd_id; u8 group_id; } __packed cmds[16]; } __packed; /** * iwl_fw_dbg_trigger_stats - configures trigger for statistics * @stop_offset: the offset of the value to be monitored * @stop_threshold: the threshold above which to collect * @start_offset: the offset of the value to be monitored * @start_threshold: the threshold above which to start recording */ struct iwl_fw_dbg_trigger_stats { __le32 stop_offset; __le32 stop_threshold; __le32 start_offset; __le32 start_threshold; } __packed; /** * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI * @rssi: RSSI value to trigger at */ struct iwl_fw_dbg_trigger_low_rssi { __le32 rssi; } __packed; /** * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events * @stop_auth_denied: number of denied authentication to collect * @stop_auth_timeout: number of authentication timeout to collect * @stop_rx_deauth: number of Rx deauth before to collect * @stop_tx_deauth: number of Tx deauth before to collect * @stop_assoc_denied: number of denied association to collect * @stop_assoc_timeout: number of association timeout to collect * @stop_connection_loss: number of connection loss to collect * @start_auth_denied: number of denied authentication to start recording * @start_auth_timeout: number of authentication timeout to start recording * @start_rx_deauth: number of Rx deauth to start recording * @start_tx_deauth: number of Tx deauth to start recording * @start_assoc_denied: number of denied association to start recording * @start_assoc_timeout: number of association timeout to start recording * @start_connection_loss: number of connection loss to start recording */ struct iwl_fw_dbg_trigger_mlme { u8 stop_auth_denied; u8 stop_auth_timeout; u8 stop_rx_deauth; u8 stop_tx_deauth; u8 stop_assoc_denied; u8 stop_assoc_timeout; u8 stop_connection_loss; u8 reserved; u8 start_auth_denied; u8 start_auth_timeout; u8 start_rx_deauth; u8 start_tx_deauth; u8 start_assoc_denied; u8 start_assoc_timeout; u8 start_connection_loss; u8 reserved2; } __packed; /** * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer * @command_queue: timeout for the command queue in ms * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms * @softap: timeout for the queues of a softAP in ms * @p2p_go: timeout for the queues of a P2P GO in ms * @p2p_client: timeout for the queues of a P2P client in ms * @p2p_device: timeout for the queues of a P2P device in ms * @ibss: timeout for the queues of an IBSS in ms * @tdls: timeout for the queues of a TDLS station in ms */ struct iwl_fw_dbg_trigger_txq_timer { __le32 command_queue; __le32 bss; __le32 softap; __le32 p2p_go; __le32 p2p_client; __le32 p2p_device; __le32 ibss; __le32 tdls; __le32 reserved[4]; } __packed; /** * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger * time_Events: a list of tuples . The driver will issue a * trigger each time a time event notification that relates to time event * id with one of the actions in the bitmap is received and * BIT(notif->status) is set in status_bitmap. * */ struct iwl_fw_dbg_trigger_time_event { struct { __le32 id; __le32 action_bitmap; __le32 status_bitmap; } __packed time_events[16]; } __packed; /** * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger * rx_ba_start: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is started. * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is stopped. * tx_ba_start: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is started. * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is stopped. * rx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is received (for a Tx BlockAck session). * tx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is send (for an Rx BlocAck session). * frame_timeout: tid bitmap to configure on what tid the trigger should occur * when a frame times out in the reodering buffer. */ struct iwl_fw_dbg_trigger_ba { __le16 rx_ba_start; __le16 rx_ba_stop; __le16 tx_ba_start; __le16 tx_ba_stop; __le16 rx_bar; __le16 tx_bar; __le16 frame_timeout; } __packed; /** * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events. * @action_bitmap: the TDLS action to trigger the collection upon * @peer_mode: trigger on specific peer or all * @peer: the TDLS peer to trigger the collection on */ struct iwl_fw_dbg_trigger_tdls { u8 action_bitmap; u8 peer_mode; u8 peer[ETH_ALEN]; u8 reserved[4]; } __packed; /** * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response * status. * @statuses: the list of statuses to trigger the collection on */ struct iwl_fw_dbg_trigger_tx_status { struct tx_status { u8 status; u8 reserved[3]; } __packed statuses[16]; __le32 reserved[2]; } __packed; /** * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration. * @id: conf id * @usniffer: should the uSniffer image be used * @num_of_hcmds: how many HCMDs to send are present here * @hcmd: a variable length host command to be sent to apply the configuration. * If there is more than one HCMD to send, they will appear one after the * other and be sent in the order that they appear in. * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to * %FW_DBG_CONF_MAX configuration per run. */ struct iwl_fw_dbg_conf_tlv { u8 id; u8 usniffer; u8 reserved; u8 num_of_hcmds; struct iwl_fw_dbg_conf_hcmd hcmd; } __packed; /** * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW * @max_scan_cache_size: total space allocated for scan results (in bytes). * @max_scan_buckets: maximum number of channel buckets. * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan. * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI. * @max_scan_reporting_threshold: max possible report threshold. in percentage. * @max_hotlist_aps: maximum number of entries for hotlist APs. * @max_significant_change_aps: maximum number of entries for significant * change APs. * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can * hold. * @max_hotlist_ssids: maximum number of entries for hotlist SSIDs. * @max_number_epno_networks: max number of epno entries. * @max_number_epno_networks_by_ssid: max number of epno entries if ssid is * specified. * @max_number_of_white_listed_ssid: max number of white listed SSIDs. * @max_number_of_black_listed_ssid: max number of black listed SSIDs. */ struct iwl_fw_gscan_capabilities { __le32 max_scan_cache_size; __le32 max_scan_buckets; __le32 max_ap_cache_per_scan; __le32 max_rssi_sample_size; __le32 max_scan_reporting_threshold; __le32 max_hotlist_aps; __le32 max_significant_change_aps; __le32 max_bssid_history_entries; __le32 max_hotlist_ssids; __le32 max_number_epno_networks; __le32 max_number_epno_networks_by_ssid; __le32 max_number_of_white_listed_ssid; __le32 max_number_of_black_listed_ssid; } __packed; #endif /* __iwl_fw_file_h__ */