/* * Junction temperature thermal driver for Maxim Max77620. * * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. * * Author: Laxman Dewangan * Mallikarjun Kasoju * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #define MAX77620_NORMAL_OPERATING_TEMP 100000 #define MAX77620_TJALARM1_TEMP 120000 #define MAX77620_TJALARM2_TEMP 140000 struct max77620_therm_info { struct device *dev; struct regmap *rmap; struct thermal_zone_device *tz_device; int irq_tjalarm1; int irq_tjalarm2; }; /** * max77620_thermal_read_temp: Read PMIC die temperatue. * @data: Device specific data. * temp: Temperature in millidegrees Celsius * * The actual temperature of PMIC die is not available from PMIC. * PMIC only tells the status if it has crossed or not the threshold level * of 120degC or 140degC. * If threshold has not been crossed then assume die temperature as 100degC * else 120degC or 140deG based on the PMIC die temp threshold status. * * Return 0 on success otherwise error number to show reason of failure. */ static int max77620_thermal_read_temp(void *data, int *temp) { struct max77620_therm_info *mtherm = data; unsigned int val; int ret; ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val); if (ret < 0) { dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret); return ret; } if (val & MAX77620_IRQ_TJALRM2_MASK) *temp = MAX77620_TJALARM2_TEMP; else if (val & MAX77620_IRQ_TJALRM1_MASK) *temp = MAX77620_TJALARM1_TEMP; else *temp = MAX77620_NORMAL_OPERATING_TEMP; return 0; } static const struct thermal_zone_of_device_ops max77620_thermal_ops = { .get_temp = max77620_thermal_read_temp, }; static irqreturn_t max77620_thermal_irq(int irq, void *data) { struct max77620_therm_info *mtherm = data; if (irq == mtherm->irq_tjalarm1) dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n"); else if (irq == mtherm->irq_tjalarm2) dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n"); thermal_zone_device_update(mtherm->tz_device, THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } static int max77620_thermal_probe(struct platform_device *pdev) { struct max77620_therm_info *mtherm; int ret; mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL); if (!mtherm) return -ENOMEM; mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0); mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1); if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) { dev_err(&pdev->dev, "Alarm irq number not available\n"); return -EINVAL; } pdev->dev.of_node = pdev->dev.parent->of_node; mtherm->dev = &pdev->dev; mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL); if (!mtherm->rmap) { dev_err(&pdev->dev, "Failed to get parent regmap\n"); return -ENODEV; } mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mtherm, &max77620_thermal_ops); if (IS_ERR(mtherm->tz_device)) { ret = PTR_ERR(mtherm->tz_device); dev_err(&pdev->dev, "Failed to register thermal zone: %d\n", ret); return ret; } ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL, max77620_thermal_irq, IRQF_ONESHOT | IRQF_SHARED, dev_name(&pdev->dev), mtherm); if (ret < 0) { dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret); return ret; } ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL, max77620_thermal_irq, IRQF_ONESHOT | IRQF_SHARED, dev_name(&pdev->dev), mtherm); if (ret < 0) { dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret); return ret; } platform_set_drvdata(pdev, mtherm); return 0; } static struct platform_device_id max77620_thermal_devtype[] = { { .name = "max77620-thermal", }, {}, }; MODULE_DEVICE_TABLE(platform, max77620_thermal_devtype); static struct platform_driver max77620_thermal_driver = { .driver = { .name = "max77620-thermal", }, .probe = max77620_thermal_probe, .id_table = max77620_thermal_devtype, }; module_platform_driver(max77620_thermal_driver); MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver"); MODULE_AUTHOR("Laxman Dewangan "); MODULE_AUTHOR("Mallikarjun Kasoju "); MODULE_LICENSE("GPL v2"); >2017-01-19 09:08:37 +0100 commit24d615a694d649aa2e167c3f97f62bdad07e3f84 (patch) tree2fe33c115bdec6bf4b01e27afd90bb16fa668e22 /net/netlink/Makefile parent49def1853334396f948dcb4cedb9347abb318df5 (diff)
USB: serial: qcserial: add Dell DW5570 QDL
The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Cc: <stable@vger.kernel.org> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Johan Hovold <johan@kernel.org>
Diffstat (limited to 'net/netlink/Makefile')