#ifndef _MXSER_H #define _MXSER_H /* * Semi-public control interfaces */ /* * MOXA ioctls */ #define MOXA 0x400 #define MOXA_GETDATACOUNT (MOXA + 23) #define MOXA_DIAGNOSE (MOXA + 50) #define MOXA_CHKPORTENABLE (MOXA + 60) #define MOXA_HighSpeedOn (MOXA + 61) #define MOXA_GET_MAJOR (MOXA + 63) #define MOXA_GETMSTATUS (MOXA + 65) #define MOXA_SET_OP_MODE (MOXA + 66) #define MOXA_GET_OP_MODE (MOXA + 67) #define RS232_MODE 0 #define RS485_2WIRE_MODE 1 #define RS422_MODE 2 #define RS485_4WIRE_MODE 3 #define OP_MODE_MASK 3 #define MOXA_SDS_RSTICOUNTER (MOXA + 69) #define MOXA_ASPP_OQUEUE (MOXA + 70) #define MOXA_ASPP_MON (MOXA + 73) #define MOXA_ASPP_LSTATUS (MOXA + 74) #define MOXA_ASPP_MON_EXT (MOXA + 75) #define MOXA_SET_BAUD_METHOD (MOXA + 76) /* --------------------------------------------------- */ #define NPPI_NOTIFY_PARITY 0x01 #define NPPI_NOTIFY_FRAMING 0x02 #define NPPI_NOTIFY_HW_OVERRUN 0x04 #define NPPI_NOTIFY_SW_OVERRUN 0x08 #define NPPI_NOTIFY_BREAK 0x10 #define NPPI_NOTIFY_CTSHOLD 0x01 /* Tx hold by CTS low */ #define NPPI_NOTIFY_DSRHOLD 0x02 /* Tx hold by DSR low */ #define NPPI_NOTIFY_XOFFHOLD 0x08 /* Tx hold by Xoff received */ #define NPPI_NOTIFY_XOFFXENT 0x10 /* Xoff Sent */ /* follow just for Moxa Must chip define. */ /* */ /* when LCR register (offset 0x03) write following value, */ /* the Must chip will enter enchance mode. And write value */ /* on EFR (offset 0x02) bit 6,7 to change bank. */ #define MOXA_MUST_ENTER_ENCHANCE 0xBF /* when enhance mode enable, access on general bank register */ #define MOXA_MUST_GDL_REGISTER 0x07 #define MOXA_MUST_GDL_MASK 0x7F #define MOXA_MUST_GDL_HAS_BAD_DATA 0x80 #define MOXA_MUST_LSR_RERR 0x80 /* error in receive FIFO */ /* enchance register bank select and enchance mode setting register */ /* when LCR register equal to 0xBF */ #define MOXA_MUST_EFR_REGISTER 0x02 /* enchance mode enable */ #define MOXA_MUST_EFR_EFRB_ENABLE 0x10 /* enchance reister bank set 0, 1, 2 */ #define MOXA_MUST_EFR_BANK0 0x00 #define MOXA_MUST_EFR_BANK1 0x40 #define MOXA_MUST_EFR_BANK2 0x80 #define MOXA_MUST_EFR_BANK3 0xC0 #define MOXA_MUST_EFR_BANK_MASK 0xC0 /* set XON1 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XON1_REGISTER 0x04 /* set XON2 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XON2_REGISTER 0x05 /* set XOFF1 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XOFF1_REGISTER 0x06 /* set XOFF2 value register, when LCR=0xBF and change to bank0 */ #define MOXA_MUST_XOFF2_REGISTER 0x07 #define MOXA_MUST_RBRTL_REGISTER 0x04 #define MOXA_MUST_RBRTH_REGISTER 0x05 #define MOXA_MUST_RBRTI_REGISTER 0x06 #define MOXA_MUST_THRTL_REGISTER 0x07 #define MOXA_MUST_ENUM_REGISTER 0x04 #define MOXA_MUST_HWID_REGISTER 0x05 #define MOXA_MUST_ECR_REGISTER 0x06 #define MOXA_MUST_CSR_REGISTER 0x07 /* good data mode enable */ #define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20 /* only good data put into RxFIFO */ #define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10 /* enable CTS interrupt */ #define MOXA_MUST_IER_ECTSI 0x80 /* enable RTS interrupt */ #define MOXA_MUST_IER_ERTSI 0x40 /* enable Xon/Xoff interrupt */ #define MOXA_MUST_IER_XINT 0x20 /* enable GDA interrupt */ #define MOXA_MUST_IER_EGDAI 0x10 #define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI) /* GDA interrupt pending */ #define MOXA_MUST_IIR_GDA 0x1C #define MOXA_MUST_IIR_RDA 0x04 #define MOXA_MUST_IIR_RTO 0x0C #define MOXA_MUST_IIR_LSR 0x06 /* received Xon/Xoff or specical interrupt pending */ #define MOXA_MUST_IIR_XSC 0x10 /* RTS/CTS change state interrupt pending */ #define MOXA_MUST_IIR_RTSCTS 0x20 #define MOXA_MUST_IIR_MASK 0x3E #define MOXA_MUST_MCR_XON_FLAG 0x40 #define MOXA_MUST_MCR_XON_ANY 0x80 #define MOXA_MUST_MCR_TX_XON 0x08 /* software flow control on chip mask value */ #define MOXA_MUST_EFR_SF_MASK 0x0F /* send Xon1/Xoff1 */ #define MOXA_MUST_EFR_SF_TX1 0x08 /* send Xon2/Xoff2 */ #define MOXA_MUST_EFR_SF_TX2 0x04 /* send Xon1,Xon2/Xoff1,Xoff2 */ #define MOXA_MUST_EFR_SF_TX12 0x0C /* don't send Xon/Xoff */ #define MOXA_MUST_EFR_SF_TX_NO 0x00 /* Tx software flow control mask */ #define MOXA_MUST_EFR_SF_TX_MASK 0x0C /* don't receive Xon/Xoff */ #define MOXA_MUST_EFR_SF_RX_NO 0x00 /* receive Xon1/Xoff1 */ #define MOXA_MUST_EFR_SF_RX1 0x02 /* receive Xon2/Xoff2 */ #define MOXA_MUST_EFR_SF_RX2 0x01 /* receive Xon1,Xon2/Xoff1,Xoff2 */ #define MOXA_MUST_EFR_SF_RX12 0x03 /* Rx software flow control mask */ #define MOXA_MUST_EFR_SF_RX_MASK 0x03 #endif ='submit' value='reload'/>
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-03 12:01:54 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-03 12:01:54 -0800
commitcd44691f7177b2c1e1509d1a17d9b198ebaa34eb (patch)
treeaf696f53d3cdbe9011cdb9168b73e1b524411ecf /drivers/usb/host/Makefile
parent79c9089f97d37ffac88c3ddb6d359b2cf75058b7 (diff)
parent161e6d44a5e2d3f85365cb717d60e363171b39e6 (diff)
Merge tag 'mmc-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson: "MMC host: sdhci: Avoid hang when receiving spurious CARD_INT interrupts" * tag 'mmc-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: Ignore unexpected CARD_INT interrupts
Diffstat (limited to 'drivers/usb/host/Makefile')
/?id=1372cef1c697d8aac0cc923f8aa2c37d790ec9ed'>Diffstat (limited to 'net/ipv4/tcp_highspeed.c')