/* * Driver for 8250/16550-type serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. * * Copyright (C) 2001 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/dmaengine.h> struct uart_8250_dma { int (*tx_dma)(struct uart_8250_port *p); int (*rx_dma)(struct uart_8250_port *p); /* Filter function */ dma_filter_fn fn; /* Parameter to the filter function */ void *rx_param; void *tx_param; struct dma_slave_config rxconf; struct dma_slave_config txconf; struct dma_chan *rxchan; struct dma_chan *txchan; /* Device address base for DMA operations */ phys_addr_t rx_dma_addr; phys_addr_t tx_dma_addr; /* DMA address of the buffer in memory */ dma_addr_t rx_addr; dma_addr_t tx_addr; dma_cookie_t rx_cookie; dma_cookie_t tx_cookie; void *rx_buf; size_t rx_size; size_t tx_size; unsigned char tx_running; unsigned char tx_err; unsigned char rx_running; }; struct old_serial_port { unsigned int uart; unsigned int baud_base; unsigned int port; unsigned int irq; upf_t flags; unsigned char io_type; unsigned char __iomem *iomem_base; unsigned short iomem_reg_shift; }; struct serial8250_config { const char *name; unsigned short fifo_size; unsigned short tx_loadsz; unsigned char fcr; unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE]; unsigned int flags; }; #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ #define UART_CAP_EFR (1 << 9) /* UART has EFR */ #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ #define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ #ifdef CONFIG_SERIAL_8250_SHARE_IRQ #define SERIAL8250_SHARE_IRQS 1 #else #define SERIAL8250_SHARE_IRQS 0 #endif #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \ { \ .iobase = _base, \ .irq = _irq, \ .uartclk = 1843200, \ .iotype = UPIO_PORT, \ .flags = UPF_BOOT_AUTOCONF | (_flags), \ } #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0) static inline int serial_in(struct uart_8250_port *up, int offset) { return up->port.serial_in(&up->port, offset); } static inline void serial_out(struct uart_8250_port *up, int offset, int value) { up->port.serial_out(&up->port, offset, value); } void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); static inline int serial_dl_read(struct uart_8250_port *up) { return up->dl_read(up); } static inline void serial_dl_write(struct uart_8250_port *up, int value) { up->dl_write(up, value); } struct uart_8250_port *serial8250_get_port(int line); void serial8250_rpm_get(struct uart_8250_port *p); void serial8250_rpm_put(struct uart_8250_port *p); void serial8250_rpm_get_tx(struct uart_8250_port *p); void serial8250_rpm_put_tx(struct uart_8250_port *p); int serial8250_em485_init(struct uart_8250_port *p); void serial8250_em485_destroy(struct uart_8250_port *p); static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) { serial_out(up, UART_MCR, value); } static inline int serial8250_in_MCR(struct uart_8250_port *up) { return serial_in(up, UART_MCR); } #if defined(__alpha__) && !defined(CONFIG_PCI) /* * Digital did something really horribly wrong with the OUT1 and OUT2 * lines on at least some ALPHA's. The failure mode is that if either * is cleared, the machine locks up with endless interrupts. */ #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) #else #define ALPHA_KLUDGE_MCR 0 #endif #ifdef CONFIG_SERIAL_8250_PNP int serial8250_pnp_init(void); void serial8250_pnp_exit(void); #else static inline int serial8250_pnp_init(void) { return 0; } static inline void serial8250_pnp_exit(void) { } #endif #ifdef CONFIG_SERIAL_8250_FINTEK int fintek_8250_probe(struct uart_8250_port *uart); #else static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; } #endif #ifdef CONFIG_ARCH_OMAP1 static inline int is_omap1_8250(struct uart_8250_port *pt) { int res; switch (pt->port.mapbase) { case OMAP1_UART1_BASE: case OMAP1_UART2_BASE: case OMAP1_UART3_BASE: res = 1; break; default: res = 0; break; } return res; } static inline int is_omap1510_8250(struct uart_8250_port *pt) { if (!cpu_is_omap1510()) return 0; return is_omap1_8250(pt); } #else static inline int is_omap1_8250(struct uart_8250_port *pt) { return 0; } static inline int is_omap1510_8250(struct uart_8250_port *pt) { return 0; } #endif #ifdef CONFIG_SERIAL_8250_DMA extern int serial8250_tx_dma(struct uart_8250_port *); extern int serial8250_rx_dma(struct uart_8250_port *); extern void serial8250_rx_dma_flush(struct uart_8250_port *); extern int serial8250_request_dma(struct uart_8250_port *); extern void serial8250_release_dma(struct uart_8250_port *); #else static inline int serial8250_tx_dma(struct uart_8250_port *p) { return -1; } static inline int serial8250_rx_dma(struct uart_8250_port *p) { return -1; } static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { } static inline int serial8250_request_dma(struct uart_8250_port *p) { return -1; } static inline void serial8250_release_dma(struct uart_8250_port *p) { } #endif static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) { unsigned char status; status = serial_in(up, 0x04); /* EXCR2 */ #define PRESL(x) ((x) & 0x30) if (PRESL(status) == 0x10) { /* already in high speed mode */ return 0; } else { status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ serial_out(up, 0x04, status); } return 1; } static inline int serial_index(struct uart_port *port) { return port->minor - 64; }