/* * c67x00-drv.c: Cypress C67X00 USB Common infrastructure * * Copyright (C) 2006-2008 Barco N.V. * Derived from the Cypress cy7c67200/300 ezusb linux driver and * based on multiple host controller drivers inside the linux kernel. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301 USA. */ /* * This file implements the common infrastructure for using the c67x00. * It is both the link between the platform configuration and subdrivers and * the link between the common hardware parts and the subdrivers (e.g. * interrupt handling). * * The c67x00 has 2 SIE's (serial interface engine) which can be configured * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG). * * Depending on the platform configuration, the SIE's are created and * the corresponding subdriver is initialized (c67x00_probe_sie). */ #include #include #include #include #include #include #include #include "c67x00.h" #include "c67x00-hcd.h" static void c67x00_probe_sie(struct c67x00_sie *sie, struct c67x00_device *dev, int sie_num) { spin_lock_init(&sie->lock); sie->dev = dev; sie->sie_num = sie_num; sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num); switch (sie->mode) { case C67X00_SIE_HOST: c67x00_hcd_probe(sie); break; case C67X00_SIE_UNUSED: dev_info(sie_dev(sie), "Not using SIE %d as requested\n", sie->sie_num); break; default: dev_err(sie_dev(sie), "Unsupported configuration: 0x%x for SIE %d\n", sie->mode, sie->sie_num); break; } } static void c67x00_remove_sie(struct c67x00_sie *sie) { switch (sie->mode) { case C67X00_SIE_HOST: c67x00_hcd_remove(sie); break; default: break; } } static irqreturn_t c67x00_irq(int irq, void *__dev) { struct c67x00_device *c67x00 = __dev; struct c67x00_sie *sie; u16 msg, int_status; int i, count = 8; int_status = c67x00_ll_hpi_status(c67x00); if (!int_status) return IRQ_NONE; while (int_status != 0 && (count-- >= 0)) { c67x00_ll_irq(c67x00, int_status); for (i = 0; i < C67X00_SIES; i++) { sie = &c67x00->sie[i]; msg = 0; if (int_status & SIEMSG_FLG(i)) msg = c67x00_ll_fetch_siemsg(c67x00, i); if (sie->irq) sie->irq(sie, int_status, msg); } int_status = c67x00_ll_hpi_status(c67x00); } if (int_status) dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! " "status = 0x%04x\n", int_status); return IRQ_HANDLED; } /* ------------------------------------------------------------------------- */ static int c67x00_drv_probe(struct platform_device *pdev) { struct c67x00_device *c67x00; struct c67x00_platform_data *pdata; struct resource *res, *res2; int ret, i; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res2) return -ENODEV; pdata = dev_get_platdata(&pdev->dev); if (!pdata) return -ENODEV; c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL); if (!c67x00) return -ENOMEM; if (!request_mem_region(res->start, resource_size(res), pdev->name)) { dev_err(&pdev->dev, "Memory region busy\n"); ret = -EBUSY; goto request_mem_failed; } c67x00->hpi.base = ioremap(res->start, resource_size(res)); if (!c67x00->hpi.base) { dev_err(&pdev->dev, "Unable to map HPI registers\n"); ret = -EIO; goto map_failed; } spin_lock_init(&c67x00->hpi.lock); c67x00->hpi.regstep = pdata->hpi_regstep; c67x00->pdata = dev_get_platdata(&pdev->dev); c67x00->pdev = pdev; c67x00_ll_init(c67x00); c67x00_ll_hpi_reg_init(c67x00); ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00); if (ret) { dev_err(&pdev->dev, "Cannot claim IRQ\n"); goto request_irq_failed; } ret = c67x00_ll_reset(c67x00); if (ret) { dev_err(&pdev->dev, "Device reset failed\n"); goto reset_failed; } for (i = 0; i < C67X00_SIES; i++) c67x00_probe_sie(&c67x00->sie[i], c67x00, i); platform_set_drvdata(pdev, c67x00); return 0; reset_failed: free_irq(res2->start, c67x00); request_irq_failed: iounmap(c67x00->hpi.base); map_failed: release_mem_region(res->start, resource_size(res)); request_mem_failed: kfree(c67x00); return ret; } static int c67x00_drv_remove(struct platform_device *pdev) { struct c67x00_device *c67x00 = platform_get_drvdata(pdev); struct resource *res; int i; for (i = 0; i < C67X00_SIES; i++) c67x00_remove_sie(&c67x00->sie[i]); c67x00_ll_release(c67x00); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res) free_irq(res->start, c67x00); iounmap(c67x00->hpi.base); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) release_mem_region(res->start, resource_size(res)); kfree(c67x00); return 0; } static struct platform_driver c67x00_driver = { .probe = c67x00_drv_probe, .remove = c67x00_drv_remove, .driver = { .name = "c67x00", }, }; module_platform_driver(c67x00_driver); MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely"); MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:c67x00"); >LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/dsa/switch.c')