/*
*
* Includes for cdc-acm.c
*
* Mainly take from usbnet's cdc-ether part
*
*/
/*
* CMSPAR, some architectures can't have space and mark parity.
*/
#ifndef CMSPAR
#define CMSPAR 0
#endif
/*
* Major and minor numbers.
*/
#define ACM_TTY_MAJOR 166
#define ACM_TTY_MINORS 256
/*
* Requests.
*/
#define USB_RT_ACM (USB_TYPE_CLASS | USB_RECIP_INTERFACE)
/*
* Output control lines.
*/
#define ACM_CTRL_DTR 0x01
#define ACM_CTRL_RTS 0x02
/*
* Input control lines and line errors.
*/
#define ACM_CTRL_DCD 0x01
#define ACM_CTRL_DSR 0x02
#define ACM_CTRL_BRK 0x04
#define ACM_CTRL_RI 0x08
#define ACM_CTRL_FRAMING 0x10
#define ACM_CTRL_PARITY 0x20
#define ACM_CTRL_OVERRUN 0x40
/*
* Internal driver structures.
*/
/*
* The only reason to have several buffers is to accommodate assumptions
* in line disciplines. They ask for empty space amount, receive our URB size,
* and proceed to issue several 1-character writes, assuming they will fit.
* The very first write takes a complete URB. Fortunately, this only happens
* when processing onlcr, so we only need 2 buffers. These values must be
* powers of 2.
*/
#define ACM_NW 16
#define ACM_NR 16
struct acm_wb {
unsigned char *buf;
dma_addr_t dmah;
int len;
int use;
struct urb *urb;
struct acm *instance;
};
struct acm_rb {
int size;
unsigned char *base;
dma_addr_t dma;
int index;
struct acm *instance;
};
struct acm {
struct usb_device *dev; /* the corresponding usb device */
struct usb_interface *control; /* control interface */
struct usb_interface *data; /* data interface */
unsigned in, out; /* i/o pipes */
struct tty_port port; /* our tty port data */
struct urb *ctrlurb; /* urbs */
u8 *ctrl_buffer; /* buffers of urbs */
dma_addr_t ctrl_dma; /* dma handles of buffers */
u8 *country_codes; /* country codes from device */
unsigned int country_code_size; /* size of this buffer */
unsigned int country_rel_date; /* release date of version */
struct acm_wb wb[ACM_NW];
unsigned long read_urbs_free;
struct urb *read_urbs[ACM_NR];
struct acm_rb read_buffers[ACM_NR];
struct acm_wb *putbuffer; /* for acm_tty_put_char() */
int rx_buflimit;
spinlock_t read_lock;
int write_used; /* number of non-empty write buffers */
int transmitting;
spinlock_t write_lock;
struct mutex mutex;
bool disconnected;
unsigned long flags;
# define EVENT_TTY_WAKEUP 0
# define EVENT_RX_STALL 1
struct usb_cdc_line_coding line; /* bits, stop, parity */
struct work_struct work; /* work queue entry for line discipline waking up */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
unsigned int ctrlout; /* output control lines (DTR, RTS) */
struct async_icount iocount; /* counters for control line changes */
struct async_icount oldcount; /* for comparison of counter */
wait_queue_head_t wioctl; /* for ioctl */
unsigned int writesize; /* max packet size for the output bulk endpoint */
unsigned int readsize,ctrlsize; /* buffer sizes for freeing */
unsigned int minor; /* acm minor number */
unsigned char clocal; /* termios CLOCAL */
unsigned int ctrl_caps; /* control capabilities from the class specific header */
unsigned int susp_count; /* number of suspended interfaces */
unsigned int combined_interfaces:1; /* control and data collapsed */
unsigned int throttled:1; /* actually throttled */
unsigned int throttle_req:1; /* throttle requested */
u8 bInterval;
struct usb_anchor delayed; /* writes queued for a device about to be woken */
unsigned long quirks;
};
#define CDC_DATA_INTERFACE_TYPE 0x0a
/* constants describing various quirks and errors */
#define NO_UNION_NORMAL BIT(0)
#define SINGLE_RX_URB BIT(1)
#define NO_CAP_LINE BIT(2)
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
#define QUIRK_CONTROL_LINE_STATE BIT(6)
#define CLEAR_HALT_CONDITIONS BIT(7)
#define SEND_ZERO_PACKET BIT(8)
alue='1'>1
Pull networking fixes from David Miller:
1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP
DF on transmit).
2) Netfilter needs to reflect the fwmark when sending resets, from Pau
Espin Pedrol.
3) nftable dump OOPS fix from Liping Zhang.
4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit,
from Rolf Neugebauer.
5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd
Bergmann.
6) Fix regression in handling of NETIF_F_SG in harmonize_features(),
from Eric Dumazet.
7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern.
8) tcp_fastopen_create_child() needs to setup tp->max_window, from
Alexey Kodanev.
9) Missing kmemdup() failure check in ipv6 segment routing code, from
Eric Dumazet.
10) Don't execute unix_bind() under the bindlock, otherwise we deadlock
with splice. From WANG Cong.
11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer,
therefore callers must reload cached header pointers into that skb.
Fix from Eric Dumazet.
12) Fix various bugs in legacy IRQ fallback handling in alx driver, from
Tobias Regnery.
13) Do not allow lwtunnel drivers to be unloaded while they are
referenced by active instances, from Robert Shearman.
14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven.
15) Fix a few regressions from virtio_net XDP support, from John
Fastabend and Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits)
ISDN: eicon: silence misleading array-bounds warning
net: phy: micrel: add support for KSZ8795
gtp: fix cross netns recv on gtp socket
gtp: clear DF bit on GTP packet tx
gtp: add genl family modules alias
tcp: don't annotate mark on control socket from tcp_v6_send_response()
ravb: unmap descriptors when freeing rings
virtio_net: reject XDP programs using header adjustment
virtio_net: use dev_kfree_skb for small buffer XDP receive
r8152: check rx after napi is enabled
r8152: re-schedule napi for tx
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: avoid start_xmit to call napi_schedule during autosuspend
net: dsa: Bring back device detaching in dsa_slave_suspend()
net: phy: leds: Fix truncated LED trigger names
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
net-next: ethernet: mediatek: change the compatible string
Documentation: devicetree: change the mediatek ethernet compatible string
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
...