/* * printer.c -- Printer gadget driver * * Copyright (C) 2003-2005 David Brownell * Copyright (C) 2006 Craig W. Nadler * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include USB_GADGET_COMPOSITE_OPTIONS(); #define DRIVER_DESC "Printer Gadget" #define DRIVER_VERSION "2015 FEB 17" static const char shortname [] = "printer"; static const char driver_desc [] = DRIVER_DESC; #include "u_printer.h" /*-------------------------------------------------------------------------*/ /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! * Instead: allocate your own, using normal USB-IF procedures. */ /* Thanks to NetChip Technologies for donating this product ID. */ #define PRINTER_VENDOR_NUM 0x0525 /* NetChip */ #define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */ /* Some systems will want different product identifiers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); static char *iPNPstring; module_param(iPNPstring, charp, S_IRUGO); MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"); /* Number of requests to allocate per endpoint, not used for ep0. */ static unsigned qlen = 10; module_param(qlen, uint, S_IRUGO|S_IWUSR); #define QLEN qlen static struct usb_function_instance *fi_printer; static struct usb_function *f_printer; /*-------------------------------------------------------------------------*/ /* * DESCRIPTORS ... most are static, but strings and (full) configuration * descriptors are built on demand. */ static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, /* .bcdUSB = DYNAMIC */ .bDeviceClass = USB_CLASS_PER_INTERFACE, .bDeviceSubClass = 0, .bDeviceProtocol = 0, .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM), .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM), .bNumConfigurations = 1 }; static const struct usb_descriptor_header *otg_desc[2]; /*-------------------------------------------------------------------------*/ /* descriptors that are built on-demand */ static char product_desc [40] = DRIVER_DESC; static char serial_num [40] = "1"; static char pnp_string[PNP_STRING_LEN] = "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"; /* static strings, in UTF-8 */ static struct usb_string strings [] = { [USB_GADGET_MANUFACTURER_IDX].s = "", [USB_GADGET_PRODUCT_IDX].s = product_desc, [USB_GADGET_SERIAL_IDX].s = serial_num, { } /* end of list */ }; static struct usb_gadget_strings stringtab_dev = { .language = 0x0409, /* en-us */ .strings = strings, }; static struct usb_gadget_strings *dev_strings[] = { &stringtab_dev, NULL, }; static struct usb_configuration printer_cfg_driver = { .label = "printer", .bConfigurationValue = 1, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, }; static int printer_do_config(struct usb_configuration *c) { struct usb_gadget *gadget = c->cdev->gadget; int status = 0; usb_ep_autoconfig_reset(gadget); usb_gadget_set_selfpowered(gadget); if (gadget_is_otg(gadget)) { printer_cfg_driver.descriptors = otg_desc; printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; } f_printer = usb_get_function(fi_printer); if (IS_ERR(f_printer)) return PTR_ERR(f_printer); status = usb_add_function(c, f_printer); if (status < 0) usb_put_function(f_printer); return status; } static int printer_bind(struct usb_composite_dev *cdev) { struct f_printer_opts *opts; int ret, len; fi_printer = usb_get_function_instance("printer"); if (IS_ERR(fi_printer)) return PTR_ERR(fi_printer); if (iPNPstring) strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2); len = strlen(pnp_string); pnp_string[0] = (len >> 8) & 0xFF; pnp_string[1] = len & 0xFF; opts = container_of(fi_printer, struct f_printer_opts, func_inst); opts->minor = 0; memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN); opts->q_len = QLEN; ret = usb_string_ids_tab(cdev, strings); if (ret < 0) goto fail_put_func_inst; device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id; device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id; if (gadget_is_otg(cdev->gadget) && !otg_desc[0]) { struct usb_descriptor_header *usb_desc; usb_desc = usb_otg_descriptor_alloc(cdev->gadget); if (!usb_desc) { ret = -ENOMEM; goto fail_put_func_inst; } usb_otg_descriptor_init(cdev->gadget, usb_desc); otg_desc[0] = usb_desc; otg_desc[1] = NULL; } ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config); if (ret) goto fail_free_otg_desc; usb_composite_overwrite_options(cdev, &coverwrite); return ret; fail_free_otg_desc: kfree(otg_desc[0]); otg_desc[0] = NULL; fail_put_func_inst: usb_put_function_instance(fi_printer); return ret; } static int printer_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_printer); usb_put_function_instance(fi_printer); kfree(otg_desc[0]); otg_desc[0] = NULL; return 0; } static struct usb_composite_driver printer_driver = { .name = shortname, .dev = &device_desc, .strings = dev_strings, .max_speed = USB_SPEED_SUPER, .bind = printer_bind, .unbind = printer_unbind, }; module_usb_composite_driver(printer_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Craig Nadler"); MODULE_LICENSE("GPL"); adcb5cb6de1489422411d701c158bb69&id2=07825f0acd85dd8b7481d5ef0eb024b05364d892'>diff)
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
Make sure CRYPTO_ALG_DEAD bit is cleared before proceeding with the algorithm registration. This fixes qat-dh registration when driver is restarted Cc: <stable@vger.kernel.org> Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Diffstat (limited to 'include/trace/events/signal.h')