/* * EHCI HCD (Host Controller Driver) for USB. * * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus * Tested on AMCC PPC 440EPx * * Valentine Barshak * * Based on "ehci-ppc-soc.c" by Stefan Roese * and "ohci-ppc-of.c" by Sylvain Munaut * * This file is licenced under the GPL. */ #include #include #include #include #include #include static const struct hc_driver ehci_ppc_of_hc_driver = { .description = hcd_name, .product_desc = "OF EHCI", .hcd_priv_size = sizeof(struct ehci_hcd), /* * generic hardware linkage */ .irq = ehci_irq, .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, /* * basic lifecycle operations */ .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, /* * managing i/o requests and associated device resources */ .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, /* * scheduling support */ .get_frame_number = ehci_get_frame, /* * root hub support */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, #ifdef CONFIG_PM .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; /* * 440EPx Errata USBH_3 * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 */ #define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0) static int ppc44x_enable_bmt(struct device_node *dn) { __iomem u32 *insreg_virt; insreg_virt = of_iomap(dn, 1); if (!insreg_virt) return -EINVAL; out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT); iounmap(insreg_virt); return 0; } static int ehci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; struct ehci_hcd *ehci = NULL; struct resource res; int irq; int rv; struct device_node *np; if (usb_disabled()) return -ENODEV; dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n"); rv = of_address_to_resource(dn, 0, &res); if (rv) return rv; hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB"); if (!hcd) return -ENOMEM; hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = devm_ioremap_resource(&op->dev, &res); if (IS_ERR(hcd->regs)) { rv = PTR_ERR(hcd->regs); goto err_ioremap; } ehci = hcd_to_ehci(hcd); np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); if (np != NULL) { /* claim we really affected by usb23 erratum */ if (!of_address_to_resource(np, 0, &res)) ehci->ohci_hcctrl_reg = devm_ioremap(&op->dev, res.start + OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN); else pr_debug("%s: no ohci offset in fdt\n", __FILE__); if (!ehci->ohci_hcctrl_reg) { pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__); } else { ehci->has_amcc_usb23 = 1; } } if (of_get_property(dn, "big-endian", NULL)) { ehci->big_endian_mmio = 1; ehci->big_endian_desc = 1; } if (of_get_property(dn, "big-endian-regs", NULL)) ehci->big_endian_mmio = 1; if (of_get_property(dn, "big-endian-desc", NULL)) ehci->big_endian_desc = 1; ehci->caps = hcd->regs; if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) { rv = ppc44x_enable_bmt(dn); ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n", rv ? "NOT ": ""); } rv = usb_add_hcd(hcd, irq, 0); if (rv) goto err_ioremap; device_wakeup_enable(hcd->self.controller); return 0; err_ioremap: irq_dispose_mapping(irq); err_irq: usb_put_hcd(hcd); return rv; } static int ehci_hcd_ppc_of_remove(struct platform_device *op) { struct usb_hcd *hcd = platform_get_drvdata(op); struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct device_node *np; struct resource res; dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n"); usb_remove_hcd(hcd); irq_dispose_mapping(hcd->irq); /* use request_mem_region to test if the ohci driver is loaded. if so * ensure the ohci core is operational. */ if (ehci->has_amcc_usb23) { np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); if (np != NULL) { if (!of_address_to_resource(np, 0, &res)) if (!request_mem_region(res.start, 0x4, hcd_name)) set_ohci_hcfs(ehci, 1); else release_mem_region(res.start, 0x4); else pr_debug("%s: no ohci offset in fdt\n", __FILE__); of_node_put(np); } } usb_put_hcd(hcd); return 0; } static const struct of_device_id ehci_hcd_ppc_of_match[] = { { .compatible = "usb-ehci", }, {}, }; MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match); static struct platform_driver ehci_hcd_ppc_of_driver = { .probe = ehci_hcd_ppc_of_probe, .remove = ehci_hcd_ppc_of_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ppc-of-ehci", .of_match_table = ehci_hcd_ppc_of_match, }, }; /net-next.git/patch/drivers/usb/storage/unusual_datafab.h?id=dd86e373e09fb16b83e8adf5c48c421a4ca76468'>patch) tree55703c2ea8584e303e342090614e0aab3509ab21 /drivers/usb/storage/unusual_datafab.h parent0b3589be9b98994ce3d5aeca52445d1f5627c4ba (diff)
perf/x86/intel/rapl: Make package handling more robust
The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust") Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'drivers/usb/storage/unusual_datafab.h')