/* * Copyright 2012 Tilera Corporation. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation, version 2. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or * NON INFRINGEMENT. See the GNU General Public License for * more details. */ /* * Tilera TILE-Gx USB EHCI host controller driver. */ #include #include #include #include #include #include #include static void tilegx_start_ehc(void) { } static void tilegx_stop_ehc(void) { } static int tilegx_ehci_setup(struct usb_hcd *hcd) { int ret = ehci_init(hcd); /* * Some drivers do: * * struct ehci_hcd *ehci = hcd_to_ehci(hcd); * ehci->need_io_watchdog = 0; * * here, but since this is a new driver we're going to leave the * watchdog enabled. Later we may try to turn it off and see * whether we run into any problems. */ return ret; } static const struct hc_driver ehci_tilegx_hc_driver = { .description = hcd_name, .product_desc = "Tile-Gx EHCI", .hcd_priv_size = sizeof(struct ehci_hcd), /* * Generic hardware linkage. */ .irq = ehci_irq, .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, /* * Basic lifecycle operations. */ .reset = tilegx_ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, /* * Managing I/O requests and associated device resources. */ .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, /* * Scheduling support. */ .get_frame_number = ehci_get_frame, /* * Root hub support. */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct ehci_hcd *ehci; struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev); pte_t pte = { 0 }; int my_cpu = smp_processor_id(); int ret; if (usb_disabled()) return -ENODEV; /* * Try to initialize our GXIO context; if we can't, the device * doesn't exist. */ if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 1) != 0) return -ENXIO; hcd = usb_create_hcd(&ehci_tilegx_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { ret = -ENOMEM; goto err_hcd; } /* * We don't use rsrc_start to map in our registers, but seems like * we ought to set it to something, so we use the register VA. */ hcd->rsrc_start = (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx); hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx); hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx); tilegx_start_ehc(); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; ehci->regs = hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); /* cache this readonly data; minimize chip reads */ ehci->hcs_params = readl(&ehci->caps->hcs_params); /* Create our IRQs and register them. */ pdata->irq = irq_alloc_hwirq(-1); if (!pdata->irq) { ret = -ENXIO; goto err_no_irq; } tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU); /* Configure interrupts. */ ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx, cpu_x(my_cpu), cpu_y(my_cpu), KERNEL_PL, pdata->irq); if (ret) { ret = -ENXIO; goto err_have_irq; } /* Register all of our memory. */ pte = pte_set_home(pte, PAGE_HOME_HASH); ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0); if (ret) { ret = -ENXIO; goto err_have_irq; } ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); if (ret == 0) { platform_set_drvdata(pdev, hcd); device_wakeup_enable(hcd->self.controller); return ret; } err_have_irq: irq_free_hwirq(pdata->irq); err_no_irq: tilegx_stop_ehc(); usb_put_hcd(hcd); err_hcd: gxio_usb_host_destroy(&pdata->usb_ctx); return ret; } static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct tilegx_usb_platform_data *pdata = dev_get_platdata(&pdev->dev); usb_remove_hcd(hcd); usb_put_hcd(hcd); tilegx_stop_ehc(); gxio_usb_host_destroy(&pdata->usb_ctx); irq_free_hwirq(pdata->irq); return 0; } static void ehci_hcd_tilegx_drv_shutdown(struct platform_device *pdev) { usb_hcd_platform_shutdown(pdev); ehci_hcd_tilegx_drv_remove(pdev); } static struct platform_driver ehci_hcd_tilegx_driver = { .probe = ehci_hcd_tilegx_drv_probe, .remove = ehci_hcd_tilegx_drv_remove, .shutdown = ehci_hcd_tilegx_drv_shutdown, .driver = { .name = "tilegx-ehci", } }; MODULE_ALIAS("platform:tilegx-ehci"); gt;2016-12-30 09:29:50 -0800 committerLinus Torvalds <torvalds@linux-foundation.org>2016-12-30 09:29:50 -0800 commitf3de082c12e5e9ff43c58a7561f6ec3272d03a48 (patch) tree8aa8afa56af93cb9f72997a57ee4db6330431f14 /drivers/usb/gadget/Kconfig parent98473f9f3f9bd404873cd1178c8be7d6d619f0d1 (diff)parent02608e02fbec04fccf2eb0cc8d8082f65c0a4286 (diff)
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
Diffstat (limited to 'drivers/usb/gadget/Kconfig')