/* * EHCI HCD (Host Controller Driver) for USB. * * Bus Glue for Xilinx EHCI core on the of_platform bus * * Copyright (c) 2009 Xilinx, Inc. * * Based on "ehci-ppc-of.c" by Valentine Barshak * and "ehci-ppc-soc.c" by Stefan Roese * and "ohci-ppc-of.c" by Sylvain Munaut * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #include #include #include #include #include #include /** * ehci_xilinx_port_handed_over - hand the port out if failed to enable it * @hcd: Pointer to the usb_hcd device to which the host controller bound * @portnum:Port number to which the device is attached. * * This function is used as a place to tell the user that the Xilinx USB host * controller does support LS devices. And in an HS only configuration, it * does not support FS devices either. It is hoped that this can help a * confused user. * * There are cases when the host controller fails to enable the port due to, * for example, insufficient power that can be supplied to the device from * the USB bus. In those cases, the messages printed here are not helpful. */ static int ehci_xilinx_port_handed_over(struct usb_hcd *hcd, int portnum) { dev_warn(hcd->self.controller, "port %d cannot be enabled\n", portnum); if (hcd->has_tt) { dev_warn(hcd->self.controller, "Maybe you have connected a low speed device?\n"); dev_warn(hcd->self.controller, "We do not support low speed devices\n"); } else { dev_warn(hcd->self.controller, "Maybe your device is not a high speed device?\n"); dev_warn(hcd->self.controller, "The USB host controller does not support full speed " "nor low speed devices\n"); dev_warn(hcd->self.controller, "You can reconfigure the host controller to have " "full speed support\n"); } return 0; } static const struct hc_driver ehci_xilinx_of_hc_driver = { .description = hcd_name, .product_desc = "OF EHCI", .hcd_priv_size = sizeof(struct ehci_hcd), /* * generic hardware linkage */ .irq = ehci_irq, .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, /* * basic lifecycle operations */ .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, /* * managing i/o requests and associated device resources */ .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, /* * scheduling support */ .get_frame_number = ehci_get_frame, /* * root hub support */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, #ifdef CONFIG_PM .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif .relinquish_port = NULL, .port_handed_over = ehci_xilinx_port_handed_over, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; /** * ehci_hcd_xilinx_of_probe - Probe method for the USB host controller * @op: pointer to the platform_device bound to the host controller * * This function requests resources and sets up appropriate properties for the * host controller. Because the Xilinx USB host controller can be configured * as HS only or HS/FS only, it checks the configuration in the device tree * entry, and sets an appropriate value for hcd->has_tt. */ static int ehci_hcd_xilinx_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; struct ehci_hcd *ehci; struct resource res; int irq; int rv; int *value; if (usb_disabled()) return -ENODEV; dev_dbg(&op->dev, "initializing XILINX-OF USB Controller\n"); rv = of_address_to_resource(dn, 0, &res); if (rv) return rv; hcd = usb_create_hcd(&ehci_xilinx_of_hc_driver, &op->dev, "XILINX-OF USB"); if (!hcd) return -ENOMEM; hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); irq = irq_of_parse_and_map(dn, 0); if (!irq) { dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = devm_ioremap_resource(&op->dev, &res); if (IS_ERR(hcd->regs)) { rv = PTR_ERR(hcd->regs); goto err_irq; } ehci = hcd_to_ehci(hcd); /* This core always has big-endian register interface and uses * big-endian memory descriptors. */ ehci->big_endian_mmio = 1; ehci->big_endian_desc = 1; /* Check whether the FS support option is selected in the hardware. */ value = (int *)of_get_property(dn, "xlnx,support-usb-fs", NULL); if (value && (*value == 1)) { ehci_dbg(ehci, "USB host controller supports FS devices\n"); hcd->has_tt = 1; } else { ehci_dbg(ehci, "USB host controller is HS only\n"); hcd->has_tt = 0; } /* Debug registers are at the first 0x100 region */ ehci->caps = hcd->regs + 0x100; rv = usb_add_hcd(hcd, irq, 0); if (rv == 0) { device_wakeup_enable(hcd->self.controller); return 0; } err_irq: usb_put_hcd(hcd); return rv; } /** * ehci_hcd_xilinx_of_remove - shutdown hcd and release resources * @op: pointer to platform_device structure that is to be removed * * Remove the hcd structure, and release resources that has been requested * during probe. */ static int ehci_hcd_xilinx_of_remove(struct platform_device *op) { struct usb_hcd *hcd = platform_get_drvdata(op); dev_dbg(&op->dev, "stopping XILINX-OF USB Controller\n"); usb_remove_hcd(hcd); usb_put_hcd(hcd); return 0; } static const struct of_device_id ehci_hcd_xilinx_of_match[] = { {.compatible = "xlnx,xps-usb-host-1.00.a",}, {}, }; MODULE_DEVICE_TABLE(of, ehci_hcd_xilinx_of_match); static struct platform_driver ehci_hcd_xilinx_of_driver = { .probe = ehci_hcd_xilinx_of_probe, .remove = ehci_hcd_xilinx_of_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xilinx-of-ehci", .of_match_table = ehci_hcd_xilinx_of_match, }, }; d>
i2c: piix4: Request the SMBUS semaphore inside the mutex
SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid multiple buses accessing to the semaphore at the same time. Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/usb/early/ehci-dbgp.c')