/* * OHCI HCD (Host Controller Driver) for USB. * * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2002 David Brownell * (C) Copyright 2002 Hewlett-Packard Company * (C) Copyright 2006 Sylvain Munaut * * Bus glue for OHCI HC on the of_platform bus * * Modified for of_platform bus from ohci-sa1111.c * * This file is licenced under the GPL. */ #include #include #include #include #include static int ohci_ppc_of_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; if ((ret = ohci_init(ohci)) < 0) return ret; if ((ret = ohci_run(ohci)) < 0) { dev_err(hcd->self.controller, "can't start %s\n", hcd->self.bus_name); ohci_stop(hcd); return ret; } return 0; } static const struct hc_driver ohci_ppc_of_hc_driver = { .description = hcd_name, .product_desc = "OF OHCI", .hcd_priv_size = sizeof(struct ohci_hcd), /* * generic hardware linkage */ .irq = ohci_irq, .flags = HCD_USB11 | HCD_MEMORY, /* * basic lifecycle operations */ .start = ohci_ppc_of_start, .stop = ohci_stop, .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources */ .urb_enqueue = ohci_urb_enqueue, .urb_dequeue = ohci_urb_dequeue, .endpoint_disable = ohci_endpoint_disable, /* * scheduling support */ .get_frame_number = ohci_get_frame, /* * root hub support */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; static int ohci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; struct ohci_hcd *ohci; struct resource res; int irq; int rv; int is_bigendian; struct device_node *np; if (usb_disabled()) return -ENODEV; is_bigendian = of_device_is_compatible(dn, "ohci-bigendian") || of_device_is_compatible(dn, "ohci-be"); dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n"); rv = of_address_to_resource(dn, 0, &res); if (rv) return rv; hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB"); if (!hcd) return -ENOMEM; hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); hcd->regs = devm_ioremap_resource(&op->dev, &res); if (IS_ERR(hcd->regs)) { rv = PTR_ERR(hcd->regs); goto err_rmr; } irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_rmr; } ohci = hcd_to_ohci(hcd); if (is_bigendian) { ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; if (of_device_is_compatible(dn, "fsl,mpc5200-ohci")) ohci->flags |= OHCI_QUIRK_FRAME_NO; if (of_device_is_compatible(dn, "mpc5200-ohci")) ohci->flags |= OHCI_QUIRK_FRAME_NO; } ohci_hcd_init(ohci); rv = usb_add_hcd(hcd, irq, 0); if (rv == 0) { device_wakeup_enable(hcd->self.controller); return 0; } /* by now, 440epx is known to show usb_23 erratum */ np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx"); /* Work around - At this point ohci_run has executed, the * controller is running, everything, the root ports, etc., is * set up. If the ehci driver is loaded, put the ohci core in * the suspended state. The ehci driver will bring it out of * suspended state when / if a non-high speed USB device is * attached to the USB Host port. If the ehci driver is not * loaded, do nothing. request_mem_region is used to test if * the ehci driver is loaded. */ if (np != NULL) { if (!of_address_to_resource(np, 0, &res)) { if (!request_mem_region(res.start, 0x4, hcd_name)) { writel_be((readl_be(&ohci->regs->control) | OHCI_USB_SUSPEND), &ohci->regs->control); (void) readl_be(&ohci->regs->control); } else release_mem_region(res.start, 0x4); } else pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__); } irq_dispose_mapping(irq); err_rmr: usb_put_hcd(hcd); return rv; } static int ohci_hcd_ppc_of_remove(struct platform_device *op) { struct usb_hcd *hcd = platform_get_drvdata(op); dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n"); usb_remove_hcd(hcd); irq_dispose_mapping(hcd->irq); usb_put_hcd(hcd); return 0; } static const struct of_device_id ohci_hcd_ppc_of_match[] = { #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE { .name = "usb", .compatible = "ohci-bigendian", }, { .name = "usb", .compatible = "ohci-be", }, #endif #ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE { .name = "usb", .compatible = "ohci-littledian", }, { .name = "usb", .compatible = "ohci-le", }, #endif {}, }; MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match); #if !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \ !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE) #error "No endianness selected for ppc-of-ohci" #endif static struct platform_driver ohci_hcd_ppc_of_driver = { .probe = ohci_hcd_ppc_of_probe, .remove = ohci_hcd_ppc_of_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ppc-of-ohci", .of_match_table = ohci_hcd_ppc_of_match, }, }; 2bdad07e3f84 (patch) tree2fe33c115bdec6bf4b01e27afd90bb16fa668e22 /sound/soc/tegra parent49def1853334396f948dcb4cedb9347abb318df5 (diff)
USB: serial: qcserial: add Dell DW5570 QDL
The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Cc: <stable@vger.kernel.org> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Johan Hovold <johan@kernel.org>
Diffstat (limited to 'sound/soc/tegra')