/* * xHCI host controller driver * * Copyright (C) 2008 Intel Corp. * * Author: Sarah Sharp * Some code borrowed from the Linux EHCI driver. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Up to 16 ms to halt an HC */ #define XHCI_MAX_HALT_USEC (16*1000) /* HC not running - set to 1 when run/stop bit is cleared. */ #define XHCI_STS_HALT (1<<0) /* HCCPARAMS offset from PCI base address */ #define XHCI_HCC_PARAMS_OFFSET 0x10 /* HCCPARAMS contains the first extended capability pointer */ #define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff) /* Command and Status registers offset from the Operational Registers address */ #define XHCI_CMD_OFFSET 0x00 #define XHCI_STS_OFFSET 0x04 #define XHCI_MAX_EXT_CAPS 50 /* Capability Register */ /* bits 7:0 - how long is the Capabilities register */ #define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff) /* Extended capability register fields */ #define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff) #define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff) #define XHCI_EXT_CAPS_VAL(p) ((p)>>16) /* Extended capability IDs - ID 0 reserved */ #define XHCI_EXT_CAPS_LEGACY 1 #define XHCI_EXT_CAPS_PROTOCOL 2 #define XHCI_EXT_CAPS_PM 3 #define XHCI_EXT_CAPS_VIRT 4 #define XHCI_EXT_CAPS_ROUTE 5 /* IDs 6-9 reserved */ #define XHCI_EXT_CAPS_DEBUG 10 /* USB Legacy Support Capability - section 7.1.1 */ #define XHCI_HC_BIOS_OWNED (1 << 16) #define XHCI_HC_OS_OWNED (1 << 24) /* USB Legacy Support Capability - section 7.1.1 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_SUPPORT_OFFSET (0x00) /* USB Legacy Support Control and Status Register - section 7.1.2 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_CONTROL_OFFSET (0x04) /* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ #define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) #define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ #define XHCI_L1C (1 << 16) /* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */ #define XHCI_HLC (1 << 19) #define XHCI_BLC (1 << 20) /* command register values to disable interrupts and halt the HC */ /* start/stop HC execution - do not write unless HC is halted*/ #define XHCI_CMD_RUN (1 << 0) /* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */ #define XHCI_CMD_EIE (1 << 2) /* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */ #define XHCI_CMD_HSEIE (1 << 3) /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ #define XHCI_CMD_EWE (1 << 10) #define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE) /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ #define XHCI_STS_CNR (1 << 11) #include /** * Find the offset of the extended capabilities with capability ID id. * * @base PCI MMIO registers base address. * @start address at which to start looking, (0 or HCC_PARAMS to start at * beginning of list) * @id Extended capability ID to search for. * * Returns the offset of the next matching extended capability structure. * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL, * and this provides a way to find them all. */ static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id) { u32 val; u32 next; u32 offset; offset = start; if (!start || start == XHCI_HCC_PARAMS_OFFSET) { val = readl(base + XHCI_HCC_PARAMS_OFFSET); if (val == ~0) return 0; offset = XHCI_HCC_EXT_CAPS(val) << 2; if (!offset) return 0; }; do { val = readl(base + offset); if (val == ~0) return 0; if (XHCI_EXT_CAPS_ID(val) == id && offset != start) return offset; next = XHCI_EXT_CAPS_NEXT(val); offset += next << 2; } while (next); return 0; } lected='selected'>unified
authorzhong jiang <zhongjiang@huawei.com>2017-01-24 15:18:52 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-01-24 16:26:14 -0800
commit3277953de2f31dd03c6375e9a9f680ac37fc9d27 (patch)
tree6ba22924faa1b82ef2f0277db10a3f5abdc44157 /tools/perf/arch/xtensa/util
parent3705ccfdd1e8b539225ce20e3925a945cc788d67 (diff)
mm: do not export ioremap_page_range symbol for external module
Recently, I've found cases in which ioremap_page_range was used incorrectly, in external modules, leading to crashes. This can be partly attributed to the fact that ioremap_page_range is lower-level, with fewer protections, as compared to the other functions that an external module would typically call. Those include: ioremap_cache ioremap_nocache ioremap_prot ioremap_uc ioremap_wc ioremap_wt ...each of which wraps __ioremap_caller, which in turn provides a safer way to achieve the mapping. Therefore, stop EXPORT-ing ioremap_page_range. Link: http://lkml.kernel.org/r/1485173220-29010-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Suggested-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'tools/perf/arch/xtensa/util')