/* * Copyright (c) 2015 MediaTek Inc. * Author: * Zhigang.Wei * Chunfeng.Yun * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef _XHCI_MTK_H_ #define _XHCI_MTK_H_ #include "xhci.h" /** * To simplify scheduler algorithm, set a upper limit for ESIT, * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, * round down to the limit value, that means allocating more * bandwidth to it. */ #define XHCI_MTK_MAX_ESIT 64 /** * struct mu3h_sch_bw_info: schedule information for bandwidth domain * * @bus_bw: array to keep track of bandwidth already used at each uframes * @bw_ep_list: eps in the bandwidth domain * * treat a HS root port as a bandwidth domain, but treat a SS root port as * two bandwidth domains, one for IN eps and another for OUT eps. */ struct mu3h_sch_bw_info { u32 bus_bw[XHCI_MTK_MAX_ESIT]; struct list_head bw_ep_list; }; /** * struct mu3h_sch_ep_info: schedule information for endpoint * * @esit: unit is 125us, equal to 2 << Interval field in ep-context * @num_budget_microframes: number of continuous uframes * (@repeat==1) scheduled within the interval * @bw_cost_per_microframe: bandwidth cost per microframe * @endpoint: linked into bandwidth domain which it belongs to * @ep: address of usb_host_endpoint struct * @offset: which uframe of the interval that transfer should be * scheduled first time within the interval * @repeat: the time gap between two uframes that transfers are * scheduled within a interval. in the simple algorithm, only * assign 0 or 1 to it; 0 means using only one uframe in a * interval, and 1 means using @num_budget_microframes * continuous uframes * @pkts: number of packets to be transferred in the scheduled uframes * @cs_count: number of CS that host will trigger * @burst_mode: burst mode for scheduling. 0: normal burst mode, * distribute the bMaxBurst+1 packets for a single burst * according to @pkts and @repeat, repeate the burst multiple * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets * according to @pkts and @repeat. normal mode is used by * default */ struct mu3h_sch_ep_info { u32 esit; u32 num_budget_microframes; u32 bw_cost_per_microframe; struct list_head endpoint; void *ep; /* * mtk xHCI scheduling information put into reserved DWs * in ep context */ u32 offset; u32 repeat; u32 pkts; u32 cs_count; u32 burst_mode; }; #define MU3C_U3_PORT_MAX 4 #define MU3C_U2_PORT_MAX 5 /** * struct mu3c_ippc_regs: MTK ssusb ip port control registers * @ip_pw_ctr0~3: ip power and clock control registers * @ip_pw_sts1~2: ip power and clock status registers * @ip_xhci_cap: ip xHCI capability register * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used * @u2_phy_pll: usb2 phy pll control register */ struct mu3c_ippc_regs { __le32 ip_pw_ctr0; __le32 ip_pw_ctr1; __le32 ip_pw_ctr2; __le32 ip_pw_ctr3; __le32 ip_pw_sts1; __le32 ip_pw_sts2; __le32 reserved0[3]; __le32 ip_xhci_cap; __le32 reserved1[2]; __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; __le32 reserved2; __le32 u2_phy_pll; __le32 reserved3[33]; /* 0x80 ~ 0xff */ }; struct xhci_hcd_mtk { struct device *dev; struct usb_hcd *hcd; struct mu3h_sch_bw_info *sch_array; struct mu3c_ippc_regs __iomem *ippc_regs; bool has_ippc; int num_u2_ports; int num_u3_ports; struct regulator *vusb33; struct regulator *vbus; struct clk *sys_clk; /* sys and mac clock */ struct clk *wk_deb_p0; /* port0's wakeup debounce clock */ struct clk *wk_deb_p1; struct regmap *pericfg; struct phy **phys; int num_phys; int wakeup_src; bool lpm_support; }; static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) { return dev_get_drvdata(hcd->self.controller); } #if IS_ENABLED(CONFIG_USB_XHCI_MTK) int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); #else static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { return 0; } static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { } #endif #endif /* _XHCI_MTK_H_ */ ='ctrl'>
authorRaju Lakkaraju <Raju.Lakkaraju@microsemi.com>2017-02-07 19:10:26 +0530
committerDavid S. Miller <davem@davemloft.net>2017-02-08 13:29:04 -0500
commit04d8a0a5f3b6887543850d991a5e37c4ec90e250 (patch)
treeee1fafb2122c2b29c7cb19e571bd7229afdbf847 /drivers/usb/musb/blackfin.c
parentff4cf0e5ce952488074aa7f47734af1794f55fbc (diff)
net: phy: Add LED mode driver for Microsemi PHYs.
LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/usb/musb/blackfin.c')