/* * Copyright (c) 2015 MediaTek Inc. * Author: * Zhigang.Wei * Chunfeng.Yun * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef _XHCI_MTK_H_ #define _XHCI_MTK_H_ #include "xhci.h" /** * To simplify scheduler algorithm, set a upper limit for ESIT, * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, * round down to the limit value, that means allocating more * bandwidth to it. */ #define XHCI_MTK_MAX_ESIT 64 /** * struct mu3h_sch_bw_info: schedule information for bandwidth domain * * @bus_bw: array to keep track of bandwidth already used at each uframes * @bw_ep_list: eps in the bandwidth domain * * treat a HS root port as a bandwidth domain, but treat a SS root port as * two bandwidth domains, one for IN eps and another for OUT eps. */ struct mu3h_sch_bw_info { u32 bus_bw[XHCI_MTK_MAX_ESIT]; struct list_head bw_ep_list; }; /** * struct mu3h_sch_ep_info: schedule information for endpoint * * @esit: unit is 125us, equal to 2 << Interval field in ep-context * @num_budget_microframes: number of continuous uframes * (@repeat==1) scheduled within the interval * @bw_cost_per_microframe: bandwidth cost per microframe * @endpoint: linked into bandwidth domain which it belongs to * @ep: address of usb_host_endpoint struct * @offset: which uframe of the interval that transfer should be * scheduled first time within the interval * @repeat: the time gap between two uframes that transfers are * scheduled within a interval. in the simple algorithm, only * assign 0 or 1 to it; 0 means using only one uframe in a * interval, and 1 means using @num_budget_microframes * continuous uframes * @pkts: number of packets to be transferred in the scheduled uframes * @cs_count: number of CS that host will trigger * @burst_mode: burst mode for scheduling. 0: normal burst mode, * distribute the bMaxBurst+1 packets for a single burst * according to @pkts and @repeat, repeate the burst multiple * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets * according to @pkts and @repeat. normal mode is used by * default */ struct mu3h_sch_ep_info { u32 esit; u32 num_budget_microframes; u32 bw_cost_per_microframe; struct list_head endpoint; void *ep; /* * mtk xHCI scheduling information put into reserved DWs * in ep context */ u32 offset; u32 repeat; u32 pkts; u32 cs_count; u32 burst_mode; }; #define MU3C_U3_PORT_MAX 4 #define MU3C_U2_PORT_MAX 5 /** * struct mu3c_ippc_regs: MTK ssusb ip port control registers * @ip_pw_ctr0~3: ip power and clock control registers * @ip_pw_sts1~2: ip power and clock status registers * @ip_xhci_cap: ip xHCI capability register * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used * @u2_phy_pll: usb2 phy pll control register */ struct mu3c_ippc_regs { __le32 ip_pw_ctr0; __le32 ip_pw_ctr1; __le32 ip_pw_ctr2; __le32 ip_pw_ctr3; __le32 ip_pw_sts1; __le32 ip_pw_sts2; __le32 reserved0[3]; __le32 ip_xhci_cap; __le32 reserved1[2]; __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; __le32 reserved2; __le32 u2_phy_pll; __le32 reserved3[33]; /* 0x80 ~ 0xff */ }; struct xhci_hcd_mtk { struct device *dev; struct usb_hcd *hcd; struct mu3h_sch_bw_info *sch_array; struct mu3c_ippc_regs __iomem *ippc_regs; bool has_ippc; int num_u2_ports; int num_u3_ports; struct regulator *vusb33; struct regulator *vbus; struct clk *sys_clk; /* sys and mac clock */ struct clk *wk_deb_p0; /* port0's wakeup debounce clock */ struct clk *wk_deb_p1; struct regmap *pericfg; struct phy **phys; int num_phys; int wakeup_src; bool lpm_support; }; static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) { return dev_get_drvdata(hcd->self.controller); } #if IS_ENABLED(CONFIG_USB_XHCI_MTK) int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); #else static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { return 0; } static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep) { } #endif #endif /* _XHCI_MTK_H_ */ ype='submit' value='reload'/>
authorSteven Rostedt (VMware) <rostedt@goodmis.org>2017-01-30 19:27:10 -0500
committerSteven Rostedt (VMware) <rostedt@goodmis.org>2017-01-31 09:13:49 -0500
commit79c6f448c8b79c321e4a1f31f98194e4f6b6cae7 (patch)
tree370efda701f03cccf21e02bb1fdd3b852547d75c /sound/soc/codecs/tas5086.c
parent0c744ea4f77d72b3dcebb7a8f2684633ec79be88 (diff)
tracing: Fix hwlat kthread migration
The hwlat tracer creates a kernel thread at start of the tracer. It is pinned to a single CPU and will move to the next CPU after each period of running. If the user modifies the migration thread's affinity, it will not change after that happens. The original code created the thread at the first instance it was called, but later was changed to destroy the thread after the tracer was finished, and would not be created until the next instance of the tracer was established. The code that initialized the affinity was only called on the initial instantiation of the tracer. After that, it was not initialized, and the previous affinity did not match the current newly created one, making it appear that the user modified the thread's affinity when it did not, and the thread failed to migrate again. Cc: stable@vger.kernel.org Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Diffstat (limited to 'sound/soc/codecs/tas5086.c')