/* * Emagic EMI 2|6 usb audio interface firmware loader. * Copyright (C) 2002 * Tapio Laxström (tapio.laxstrom@iptime.fi) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, as published by * the Free Software Foundation, version 2. * * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp */ #include #include #include #include #include #include #include #include #define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ #define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */ #define EMI26B_PRODUCT_ID 0x0102 /* EMI 2|6 without firmware */ #define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ #define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ #define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ #define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ #define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ #define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) static int emi26_writememory( struct usb_device *dev, int address, const unsigned char *data, int length, __u8 bRequest); static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi26_load_firmware (struct usb_device *dev); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi26_disconnect(struct usb_interface *intf); /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_writememory (struct usb_device *dev, int address, const unsigned char *data, int length, __u8 request) { int result; unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); return -ENOMEM; } /* Note: usb_control_msg returns negative value on error or length of the * data that was written! */ result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); kfree (buffer); return result; } /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) { int response; dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); /* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */ response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) { dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); } return response; } #define FW_LOAD_SIZE 1023 static int emi26_load_firmware (struct usb_device *dev) { const struct firmware *loader_fw = NULL; const struct firmware *bitstream_fw = NULL; const struct firmware *firmware_fw = NULL; const struct ihex_binrec *rec; int err = -ENOMEM; int i; __u32 addr; /* Address to write */ __u8 *buf; buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); if (!buf) goto wraperr; err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); if (err) goto nofw; err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw", &dev->dev); if (err) goto nofw; err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw", &dev->dev); if (err) { nofw: dev_err(&dev->dev, "%s - request_firmware() failed\n", __func__); goto wraperr; } /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) goto wraperr; rec = (const struct ihex_binrec *)loader_fw->data; /* 1. We need to put the loader for the FPGA into the EZ-USB */ while (rec) { err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); if (err < 0) goto wraperr; rec = ihex_next_binrec(rec); } /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) goto wraperr; msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI * Note: collect up to 1023 (yes!) bytes and send them with * a single request. This is _much_ faster! */ rec = (const struct ihex_binrec *)bitstream_fw->data; do { i = 0; addr = be32_to_cpu(rec->addr); /* intel hex records are terminated with type 0 element */ while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) { memcpy(buf + i, rec->data, be16_to_cpu(rec->len)); i += be16_to_cpu(rec->len); rec = ihex_next_binrec(rec); } err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); if (err < 0) goto wraperr; } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) goto wraperr; /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ for (rec = (const struct ihex_binrec *)loader_fw->data; rec; rec = ihex_next_binrec(rec)) { err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); if (err < 0) goto wraperr; } msleep(250); /* let device settle */ /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) goto wraperr; /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ for (rec = (const struct ihex_binrec *)firmware_fw->data; rec; rec = ihex_next_binrec(rec)) { if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) { err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_EXTERNAL); if (err < 0) goto wraperr; } } /* Assert reset (stop the CPU in the EMI) */ err = emi26_set_reset(dev,1); if (err < 0) goto wraperr; for (rec = (const struct ihex_binrec *)firmware_fw->data; rec; rec = ihex_next_binrec(rec)) { if (INTERNAL_RAM(be32_to_cpu(rec->addr))) { err = emi26_writememory(dev, be32_to_cpu(rec->addr), rec->data, be16_to_cpu(rec->len), ANCHOR_LOAD_INTERNAL); if (err < 0) goto wraperr; } } /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); if (err < 0) goto wraperr; msleep(250); /* let device settle */ /* return 1 to fail the driver inialization * and give real driver change to load */ err = 1; wraperr: if (err < 0) dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", __func__, err); release_firmware(loader_fw); release_firmware(bitstream_fw); release_firmware(firmware_fw); kfree(buf); return err; } static const struct usb_device_id id_table[] = { { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, id_table); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); dev_info(&intf->dev, "%s start\n", __func__); emi26_load_firmware(dev); /* do not return the driver context, let real audio driver do that */ return -EIO; } static void emi26_disconnect(struct usb_interface *intf) { } static struct usb_driver emi26_driver = { .name = "emi26 - firmware loader", .probe = emi26_probe, .disconnect = emi26_disconnect, .id_table = id_table, }; module_usb_driver(emi26_driver); MODULE_AUTHOR("Tapio Laxström"); MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader."); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("emi26/loader.fw"); MODULE_FIRMWARE("emi26/bitstream.fw"); MODULE_FIRMWARE("emi26/firmware.fw"); /* vi:ai:syntax=c:sw=8:ts=8:tw=80 */ pan>nl80211: add HT/VHT capabilities to AP parametersJohannes Berg1-1/+46 For the benefit of drivers that rebuild IEs in firmware, parse the IEs for HT/VHT capabilities and the respective membership selector in the (extended) supported rates. This avoids duplicating the same code into all drivers that need this information. Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2017-02-08cfg80211: make rdev assignment clearer in nl80211_testmode_dump()Luca Coelho1-7/+6 Avoid assigning rdev to NULL when we already have it and getting it again from the wiphy index, by moving this code to relevant if block. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2017-02-08cfg80211 debugfs: Cleanup some checkpatch issuesPichugin Dmitry1-5/+5 This fixes the checkpatch.pl warnings: * Macros should not use a trailing semicolon. * Spaces required around that '='. * Symbolic permissions 'S_IRUGO' are not preferred. Signed-off-by: Dmitriy Pichugin <smokeman85@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller