#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/otg.h>
#include <linux/usb/usb_phy_generic.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/usb/of.h>

#include "phy-am335x-control.h"
#include "phy-generic.h"

struct am335x_phy {
	struct usb_phy_generic usb_phy_gen;
	struct phy_control *phy_ctrl;
	int id;
	enum usb_dr_mode dr_mode;
};

static int am335x_init(struct usb_phy *phy)
{
	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);

	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true);
	return 0;
}

static void am335x_shutdown(struct usb_phy *phy)
{
	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);

	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
}

static int am335x_phy_probe(struct platform_device *pdev)
{
	struct am335x_phy *am_phy;
	struct device *dev = &pdev->dev;
	int ret;

	am_phy = devm_kzalloc(dev, sizeof(*am_phy), GFP_KERNEL);
	if (!am_phy)
		return -ENOMEM;

	am_phy->phy_ctrl = am335x_get_phy_control(dev);
	if (!am_phy->phy_ctrl)
		return -EPROBE_DEFER;

	am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy");
	if (am_phy->id < 0) {
		dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id);
		return am_phy->id;
	}

	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);

	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
	if (ret)
		return ret;

	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
	if (ret)
		return ret;
	am_phy->usb_phy_gen.phy.init = am335x_init;
	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;

	platform_set_drvdata(pdev, am_phy);
	device_init_wakeup(dev, true);

	/*
	 * If we leave PHY wakeup enabled then AM33XX wakes up
	 * immediately from DS0. To avoid this we mark dev->power.can_wakeup
	 * to false. The same is checked in suspend routine to decide
	 * on whether to enable PHY wakeup or not.
	 * PHY wakeup works fine in standby mode, there by allowing us to
	 * handle remote wakeup, wakeup on disconnect and connect.
	 */

	device_set_wakeup_enable(dev, false);
	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);

	return 0;
}

static int am335x_phy_remove(struct platform_device *pdev)
{
	struct am335x_phy *am_phy = platform_get_drvdata(pdev);

	usb_remove_phy(&am_phy->usb_phy_gen.phy);
	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int am335x_phy_suspend(struct device *dev)
{
	struct platform_device	*pdev = to_platform_device(dev);
	struct am335x_phy *am_phy = platform_get_drvdata(pdev);

	/*
	 * Enable phy wakeup only if dev->power.can_wakeup is true.
	 * Make sure to enable wakeup to support remote wakeup	in
	 * standby mode ( same is not supported in OFF(DS0) mode).
	 * Enable it by doing
	 * echo enabled > /sys/bus/platform/devices/<usb-phy-id>/power/wakeup
	 */

	if (device_may_wakeup(dev))
		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);

	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);

	return 0;
}

static int am335x_phy_resume(struct device *dev)
{
	struct platform_device	*pdev = to_platform_device(dev);
	struct am335x_phy	*am_phy = platform_get_drvdata(pdev);

	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true);

	if (device_may_wakeup(dev))
		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);

	return 0;
}
#endif

static SIMPLE_DEV_PM_OPS(am335x_pm_ops, am335x_phy_suspend, am335x_phy_resume);

static const struct of_device_id am335x_phy_ids[] = {
	{ .compatible = "ti,am335x-usb-phy" },
	{ }
};
MODULE_DEVICE_TABLE(of, am335x_phy_ids);

static struct platform_driver am335x_phy_driver = {
	.probe          = am335x_phy_probe,
	.remove         = am335x_phy_remove,
	.driver         = {
		.name   = "am335x-phy-driver",
		.pm = &am335x_pm_ops,
		.of_match_table = am335x_phy_ids,
	},
};

module_platform_driver(am335x_phy_driver);
MODULE_LICENSE("GPL v2");
 to dump the addresses in the compressed format.

Signed-off-by: David Ahern &lt;dsa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-04 19:58:14 -0500'>2017-02-04</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=16a16cd35ee29d9bea54dd60e55d9c1cc685a37d'>net: ipv6: Change notifications for multipath delete to RTA_MULTIPATH</a></td><td>David Ahern</td><td>2</td><td><span class='deletions'>-1</span>/<span class='insertions'>+28</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
If an entire multipath route is deleted using prefix and len (without any
nexthops), send a single RTM_DELROUTE notification with the full route
using RTA_MULTIPATH. This is done by generating the skb before the route
delete when all of the sibling routes are still present but sending it
after the route has been removed from the FIB. The skip_notify flag
is used to tell the lower fib code not to send notifications for the
individual nexthop routes.

If a route is deleted using RTA_MULTIPATH for any nexthops or a single
nexthop entry is deleted, then the nexthops are deleted one at a time with
notifications sent as each hop is deleted. This is necessary given that
IPv6 allows individual hops within a route to be deleted.

Signed-off-by: David Ahern &lt;dsa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-04 19:58:14 -0500'>2017-02-04</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=3b1137fe74829e021f483756a648cbb87c8a1b4a'>net: ipv6: Change notifications for multipath add to RTA_MULTIPATH</a></td><td>David Ahern</td><td>2</td><td><span class='deletions'>-3</span>/<span class='insertions'>+53</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
Change ip6_route_multipath_add to send one notifciation with the full
route encoded with RTA_MULTIPATH instead of a series of individual routes.
This is done by adding a skip_notify flag to the nl_info struct. The
flag is used to skip sending of the notification in the fib code that
actually inserts the route. Once the full route has been added, a
notification is generated with all nexthops.

ip6_route_multipath_add handles 3 use cases: new routes, route replace,
and route append. The multipath notification generated needs to be
consistent with the order of the nexthops and it should be consistent
with the order in a FIB dump which means the route with the first nexthop
needs to be used as the route reference. For the first 2 cases (new and
replace), a reference to the route used to send the notification is
obtained by saving the first route added. For the append case, the last
route added is used to loop back to its first sibling route which is
the first nexthop in the multipath route.

Signed-off-by: David Ahern &lt;dsa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-04 19:58:14 -0500'>2017-02-04</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=beb1afac518dec5a15dc92ba8f0ca016dcf457b4'>net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute</a></td><td>David Ahern</td><td>2</td><td><span class='deletions'>-17</span>/<span class='insertions'>+105</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
IPv6 returns multipath routes as a series of individual routes making
their display and handling by userspace different and more complicated
than IPv4, putting the burden on the user to see that a route is part of
a multipath route and internally creating a multipath route if desired
(e.g., libnl does this as of commit 29b71371e764). This patch addresses
this difference, allowing multipath routes to be returned using the
RTA_MULTIPATH attribute.

The end result is that IPv6 multipath routes can be treated and displayed
in a format similar to IPv4:

    $ ip -6 ro ls vrf red
    2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
    2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
    2001:db8:200::/120 metric 1024
	    nexthop via 2001:db8:1::2  dev eth1 weight 1
	    nexthop via 2001:db8:2::2  dev eth2 weight 1

Signed-off-by: David Ahern &lt;dsa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-04 19:58:14 -0500'>2017-02-04</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=0ae8133586ad1c9be894411aaf8b17bb58c8efe5'>net: ipv6: Allow shorthand delete of all nexthops in multipath route</a></td><td>David Ahern</td><td>1</td><td><span class='deletions'>-2</span>/<span class='insertions'>+36</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
IPv4 allows multipath routes to be deleted using just the prefix and
length. For example:
    $ ip ro ls vrf red
    unreachable default metric 8192
    1.1.1.0/24
        nexthop via 10.100.1.254  dev eth1 weight 1
        nexthop via 10.11.200.2  dev eth11.200 weight 1
    10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3
    10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3

    $ ip ro del 1.1.1.0/24 vrf red

    $ ip ro ls vrf red
    unreachable default metric 8192
    10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3
    10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3

The same notation does not work with IPv6 because of how multipath routes
are implemented for IPv6. For IPv6 only the first nexthop of a multipath
route is deleted if the request contains only a prefix and length. This
leads to unnecessary complexity in userspace dealing with IPv6 multipath
routes.

This patch allows all nexthops to be deleted without specifying each one
in the delete request. Internally, this is done by walking the sibling
list of the route matching the specifications given (prefix, length,
metric, protocol, etc).

    $  ip -6 ro ls vrf red
    2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
    2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
    2001:db8:200::/120 via 2001:db8:1::2 dev eth1 metric 1024  pref medium
    2001:db8:200::/120 via 2001:db8:2::2 dev eth2 metric 1024  pref medium
    ...

    $ ip -6 ro del vrf red 2001:db8:200::/120

    $ ip -6 ro ls vrf red
    2001:db8:1::/120 dev eth1 proto kernel metric 256  pref medium
    2001:db8:2::/120 dev eth2 proto kernel metric 256  pref medium
    ...

Because IPv6 allows individual nexthops to be deleted without deleting
the entire route, the ip6_route_multipath_del and non-multipath code
path (ip6_route_del) have to be discriminated so that all nexthops are
only deleted for the latter case. This is done by making the existing
fc_type in fib6_config a u16 and then adding a new u16 field with
fc_delete_all_nh as the first bit.

Suggested-by: Dinesh Dutt &lt;ddutt@cumulusnetworks.com&gt;
Signed-off-by: David Ahern &lt;dsa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 17:33:01 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=6e7bc478c9a006c701c14476ec9d389a484b4864'>net: skb_needs_check() accepts CHECKSUM_NONE for tx</a></td><td>Eric Dumazet</td><td>1</td><td><span class='deletions'>-3</span>/<span class='insertions'>+4</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
My recent change missed fact that UFO would perform a complete
UDP checksum before segmenting in frags.

In this case skb-&gt;ip_summed is set to CHECKSUM_NONE.

We need to add this valid case to skb_needs_check()

Fixes: b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise")
Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Cc: Willem de Bruijn &lt;willemb@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 17:28:29 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=79e7fff47b7bb4124ef970a13eac4fdeddd1fc25'>net: remove support for per driver ndo_busy_poll()</a></td><td>Eric Dumazet</td><td>2</td><td><span class='deletions'>-16</span>/<span class='insertions'>+0</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
We added generic support for busy polling in NAPI layer in linux-4.5

No network driver uses ndo_busy_poll() anymore, we can get rid
of the pointer in struct net_device_ops, and its use in sk_busy_loop()

Saves NETIF_F_BUSY_POLL features bit.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 16:58:20 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=52e01b84a244473074fc0612c169e2e043d58b01'>Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next</a></td><td>David S. Miller</td><td>53</td><td><span class='deletions'>-640</span>/<span class='insertions'>+576</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree, they are:

1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from
   sk_buff so we only access one single cacheline in the conntrack
   hotpath. Patchset from Florian Westphal.

2) Don't leak pointer to internal structures when exporting x_tables
   ruleset back to userspace, from Willem DeBruijn. This includes new
   helper functions to copy data to userspace such as xt_data_to_user()
   as well as conversions of our ip_tables, ip6_tables and arp_tables
   clients to use it. Not surprinsingly, ebtables requires an ad-hoc
   update. There is also a new field in x_tables extensions to indicate
   the amount of bytes that we copy to userspace.

3) Add nf_log_all_netns sysctl: This new knob allows you to enable
   logging via nf_log infrastructure for all existing netnamespaces.
   Given the effort to provide pernet syslog has been discontinued,
   let's provide a way to restore logging using netfilter kernel logging
   facilities in trusted environments. Patch from Michal Kubecek.

4) Validate SCTP checksum from conntrack helper, from Davide Caratti.

5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly
   a copy&amp;paste from the original helper, from Florian Westphal.

6) Reset netfilter state when duplicating packets, also from Florian.

7) Remove unnecessary check for broadcast in IPv6 in pkttype match and
   nft_meta, from Liping Zhang.

8) Add missing code to deal with loopback packets from nft_meta when
   used by the netdev family, also from Liping.

9) Several cleanups on nf_tables, one to remove unnecessary check from
   the netlink control plane path to add table, set and stateful objects
   and code consolidation when unregister chain hooks, from Gao Feng.

10) Fix harmless reference counter underflow in IPVS that, however,
    results in problems with the introduction of the new refcount_t
    type, from David Windsor.

11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp,
    from Davide Caratti.

12) Missing documentation on nf_tables uapi header, from Liping Zhang.

13) Use rb_entry() helper in xt_connlimit, from Geliang Tang.
====================

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 16:35:43 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=69ca05ce9dec2cc95070df7f1f10ea6c9c12d237'>sched: cls_flower: expose priority to offloading netdevice</a></td><td>Jiri Pirko</td><td>1</td><td><span class='deletions'>-0</span>/<span class='insertions'>+3</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
The driver that offloads flower rules needs to know with which priority
user inserted the rules. So add this information into offload struct.

Signed-off-by: Jiri Pirko &lt;jiri@mellanox.com&gt;
Acked-by: Ido Schimmel &lt;idosch@mellanox.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 16:23:57 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=38ab52e8e1e2dd65f2d349f82553335813b638d2'>tcp: clear pfmemalloc on outgoing skb</a></td><td>Eric Dumazet</td><td>1</td><td><span class='deletions'>-0</span>/<span class='insertions'>+7</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
Josef Bacik diagnosed following problem :

   I was seeing random disconnects while testing NBD over loopback.
   This turned out to be because NBD sets pfmemalloc on it's socket,
   however the receiving side is a user space application so does not
   have pfmemalloc set on its socket. This means that
   sk_filter_trim_cap will simply drop this packet, under the
   assumption that the other side will simply retransmit. Well we do
   retransmit, and then the packet is just dropped again for the same
   reason.

It seems the better way to address this problem is to clear pfmemalloc
in the TCP transmit path. pfmemalloc strict control really makes sense
on the receive path.

Signed-off-by: Eric Dumazet &lt;edumazet@google.com&gt;
Acked-by: Josef Bacik &lt;jbacik@fb.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 16:01:44 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=94b5e0f970258828bf163b5ef076da4e4b0802e0'>net: ipv6: Set protocol to kernel for local routes</a></td><td>David Ahern</td><td>1</td><td><span class='deletions'>-0</span>/<span class='insertions'>+1</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
IPv6 stack does not set the protocol for local routes, so those routes show
up with proto "none":
    $ ip -6 ro ls table local
    local ::1 dev lo proto none metric 0  pref medium
    local 2100:3:: dev lo proto none metric 0  pref medium
    local 2100:3::4 dev lo proto none metric 0  pref medium
    local fe80:: dev lo proto none metric 0  pref medium
    ...

Set rt6i_protocol to RTPROT_KERNEL for consistency with IPv4. Now routes
show up with proto "kernel":
    $ ip -6 ro ls table local
    local ::1 dev lo proto kernel metric 0  pref medium
    local 2100:3:: dev lo proto kernel metric 0  pref medium
    local 2100:3::4 dev lo proto kernel metric 0  pref medium
    local fe80:: dev lo proto kernel metric 0  pref medium
    ...

Signed-off-by: David Ahern &lt;dsa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 15:21:22 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=11538d039ac6efcf4f1a6c536e1b87cd3668a9fd'>bridge: vlan dst_metadata hooks in ingress and egress paths</a></td><td>Roopa Prabhu</td><td>6</td><td><span class='deletions'>-2</span>/<span class='insertions'>+82</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
- ingress hook:
    - if port is a tunnel port, use tunnel info in
      attached dst_metadata to map it to a local vlan
- egress hook:
    - if port is a tunnel port, use tunnel info attached to
      vlan to set dst_metadata on the skb

CC: Nikolay Aleksandrov &lt;nikolay@cumulusnetworks.com&gt;
Signed-off-by: Roopa Prabhu &lt;roopa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 15:21:22 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=efa5356b0d9753b9d7e63e41459eba106cce30f3'>bridge: per vlan dst_metadata netlink support</a></td><td>Roopa Prabhu</td><td>7</td><td><span class='deletions'>-48</span>/<span class='insertions'>+641</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
This patch adds support to attach per vlan tunnel info dst
metadata. This enables bridge driver to map vlan to tunnel_info
at ingress and egress. It uses the kernel dst_metadata infrastructure.

The initial use case is vlan to vni bridging, but the api is generic
to extend to any tunnel_info in the future:
    - Uapi to configure/unconfigure/dump per vlan tunnel data
    - netlink functions to configure vlan and tunnel_info mapping
    - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach
    dst_metadata to bridged packets on ports. off by default.
    - changes to existing code is mainly refactor some existing vlan
    handling netlink code + hooks for new vlan tunnel code
    - I have kept the vlan tunnel code isolated in separate files.
    - most of the netlink vlan tunnel code is handling of vlan-tunid
    ranges (follows the vlan range handling code). To conserve space
    vlan-tunid by default are always dumped in ranges if applicable.

Use case:
example use for this is a vxlan bridging gateway or vtep
which maps vlans to vn-segments (or vnis).

iproute2 example (patched and pruned iproute2 output to just show
relevant fdb entries):
example shows same host mac learnt on two vni's and
vlan 100 maps to vni 1000, vlan 101 maps to vni 1001

before (netdev per vni):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge
00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge
00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self

after this patch with collect metdata in bridged mode (single netdev):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge
00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge
00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self

CC: Nikolay Aleksandrov &lt;nikolay@cumulusnetworks.com&gt;
Signed-off-by: Roopa Prabhu &lt;roopa@cumulusnetworks.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 15:16:46 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=295a6e06d21e1f469c9f38b00125a13b60ad4e7c'>net/sched: act_ife: Change to use ife module</a></td><td>Yotam Gigi</td><td>2</td><td><span class='deletions'>-78</span>/<span class='insertions'>+33</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
Use the encode/decode functionality from the ife module instead of using
implementation inside the act_ife.

Reviewed-by: Jiri Pirko &lt;jiri@mellanox.com&gt;
Signed-off-by: Yotam Gigi &lt;yotamg@mellanox.com&gt;
Signed-off-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Signed-off-by: Roman Mashak &lt;mrv@mojatatu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 15:16:45 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=1ce8460496c05379c66edc178c3c55ca4e953044'>net: Introduce ife encapsulation module</a></td><td>Yotam Gigi</td><td>5</td><td><span class='deletions'>-0</span>/<span class='insertions'>+165</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
This module is responsible for the ife encapsulation protocol
encode/decode logics. That module can:
 - ife_encode: encode skb and reserve space for the ife meta header
 - ife_decode: decode skb and extract the meta header size
 - ife_tlv_meta_encode - encodes one tlv entry into the reserved ife
   header space.
 - ife_tlv_meta_decode - decodes one tlv entry from the packet
 - ife_tlv_meta_next - advance to the next tlv

Reviewed-by: Jiri Pirko &lt;jiri@mellanox.com&gt;
Signed-off-by: Yotam Gigi &lt;yotamg@mellanox.com&gt;
Signed-off-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Signed-off-by: Roman Mashak &lt;mrv@mojatatu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 15:16:45 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=1d5e7c859e81a66674d194c346119d154d31e9dc'>net/sched: act_ife: Unexport ife_tlv_meta_encode</a></td><td>Yotam Gigi</td><td>1</td><td><span class='deletions'>-2</span>/<span class='insertions'>+2</span></td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
As the function ife_tlv_meta_encode is not used by any other module,
unexport it and make it static for the act_ife module.

Signed-off-by: Yotam Gigi &lt;yotamg@mellanox.com&gt;
Signed-off-by: Jamal Hadi Salim &lt;jhs@mojatatu.com&gt;
Signed-off-by: Roman Mashak &lt;mrv@mojatatu.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>
<tr class='logheader'><td><span title='2017-02-03 11:19:34 -0500'>2017-02-03</span></td><td class='logsubject'><a href='/cgit.cgi/linux/net-next.git/commit/net?id=3541f9e8bdebce02458882b66b638d7302c1f616'>tcp: add tcp_mss_clamp() helper</a></td><td>Eric Dumazet