#define SUSBCRequest_SetBaudRateParityAndStopBits 1 #define SUSBCR_SBR_MASK 0xFF00 #define SUSBCR_SBR_1200 0x0100 #define SUSBCR_SBR_9600 0x0200 #define SUSBCR_SBR_19200 0x0400 #define SUSBCR_SBR_28800 0x0800 #define SUSBCR_SBR_38400 0x1000 #define SUSBCR_SBR_57600 0x2000 #define SUSBCR_SBR_115200 0x4000 #define SUSBCR_SPASB_MASK 0x0070 #define SUSBCR_SPASB_NoParity 0x0010 #define SUSBCR_SPASB_OddParity 0x0020 #define SUSBCR_SPASB_EvenParity 0x0040 #define SUSBCR_SPASB_STPMASK 0x0003 #define SUSBCR_SPASB_1StopBit 0x0001 #define SUSBCR_SPASB_2StopBits 0x0002 #define SUSBCRequest_SetStatusLinesOrQueues 2 #define SUSBCR_SSL_SETRTS 0x0001 #define SUSBCR_SSL_CLRRTS 0x0002 #define SUSBCR_SSL_SETDTR 0x0004 #define SUSBCR_SSL_CLRDTR 0x0010 /* Kill the pending/current writes to the comm port. */ #define SUSBCR_SSL_PURGE_TXABORT 0x0100 /* Kill the pending/current reads to the comm port. */ #define SUSBCR_SSL_PURGE_RXABORT 0x0200 /* Kill the transmit queue if there. */ #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 /* Kill the typeahead buffer if there. */ #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 #define SUSBCRequest_GetStatusLineState 4 /* Any Character received */ #define SUSBCR_GSL_RXCHAR 0x0001 /* Transmitt Queue Empty */ #define SUSBCR_GSL_TXEMPTY 0x0004 /* CTS changed state */ #define SUSBCR_GSL_CTS 0x0008 /* DSR changed state */ #define SUSBCR_GSL_DSR 0x0010 /* RLSD changed state */ #define SUSBCR_GSL_RLSD 0x0020 /* BREAK received */ #define SUSBCR_GSL_BREAK 0x0040 /* Line status error occurred */ #define SUSBCR_GSL_ERR 0x0080 /* Ring signal detected */ #define SUSBCR_GSL_RING 0x0100 #define SUSBCRequest_Misc 8 /* use a predefined reset sequence */ #define SUSBCR_MSC_ResetReader 0x0001 /* use a predefined sequence to reset the internal queues */ #define SUSBCR_MSC_ResetAllQueues 0x0002 #define SUSBCRequest_GetMisc 0x10 /* * get the firmware version from device, coded like this 0xHHLLBBPP with * HH = Firmware Version High Byte * LL = Firmware Version Low Byte * BB = Build Number * PP = Further Attributes */ #define SUSBCR_MSC_GetFWVersion 0x0001 /* * get the hardware version from device coded like this 0xHHLLPPRR with * HH = Software Version High Byte * LL = Software Version Low Byte * PP = Further Attributes * RR = Reserved for the hardware ID */ #define SUSBCR_MSC_GetHWVersion 0x0002 iff
path: root/include/dt-bindings/interrupt-controller/mips-gic.h
AgeCommit message (Expand)AuthorFilesLines