/* * Driver for USB Mass Storage compliant devices * Transport Functions Header File * * Current development and maintenance by: * (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net) * * This driver is based on the 'USB Mass Storage Class' document. This * describes in detail the protocol used to communicate with such * devices. Clearly, the designers had SCSI and ATAPI commands in * mind when they created this document. The commands are all very * similar to commands in the SCSI-II and ATAPI specifications. * * It is important to note that in a number of cases this class * exhibits class-specific exemptions from the USB specification. * Notably the usage of NAK, STALL and ACK differs from the norm, in * that they are used to communicate wait, failed and OK on commands. * * Also, for certain devices, the interrupt endpoint is used to convey * status of a command. * * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more * information about this driver. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _TRANSPORT_H_ #define _TRANSPORT_H_ #include /* * usb_stor_bulk_transfer_xxx() return codes, in order of severity */ #define USB_STOR_XFER_GOOD 0 /* good transfer */ #define USB_STOR_XFER_SHORT 1 /* transferred less than expected */ #define USB_STOR_XFER_STALLED 2 /* endpoint stalled */ #define USB_STOR_XFER_LONG 3 /* device tried to send too much */ #define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */ /* * Transport return codes */ #define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */ #define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */ #define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */ #define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */ /* * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED * return codes. But now the transport and low-level transfer routines * treat an abort as just another error (-ENOENT for a cancelled URB). * It is up to the invoke_transport() function to test for aborts and * distinguish them from genuine communication errors. */ /* * CBI accept device specific command */ #define US_CBI_ADSC 0 extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*); extern int usb_stor_CB_reset(struct us_data*); extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*); extern int usb_stor_Bulk_max_lun(struct us_data*); extern int usb_stor_Bulk_reset(struct us_data*); extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*); extern void usb_stor_stop_transport(struct us_data*); extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe, u8 request, u8 requesttype, u16 value, u16 index, void *data, u16 size, int timeout); extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe); extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, u8 request, u8 requesttype, u16 value, u16 index, void *data, u16 size); extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, void *buf, unsigned int length, unsigned int *act_len); extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe, void *buf, unsigned int length, int use_sg, int *residual); extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, struct scsi_cmnd* srb); extern int usb_stor_port_reset(struct us_data *us); #endif '20'>20space:mode:
authorDexuan Cui <decui@microsoft.com>2017-01-28 11:46:02 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-01-31 10:59:48 +0100
commit433e19cf33d34bb6751c874a9c00980552fe508c (patch)
treece6547ef2987fbb289fa28f03536328a42781651 /kernel/irq/cpuhotplug.c
parent191e885a2e130e639bb0c8ee350d7047294f2ce6 (diff)
Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()
Commit a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") added the proper mb(), but removed the test "prev_write_sz < pending_sz" when making the signal decision. As a result, the guest can signal the host unnecessarily, and then the host can throttle the guest because the host thinks the guest is buggy or malicious; finally the user running stress test can perceive intermittent freeze of the guest. This patch brings back the test, and properly handles the in-place consumption APIs used by NetVSC (see get_next_pkt_raw(), put_pkt_raw() and commit_rd_index()). Fixes: a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reported-by: Rolf Neugebauer <rolf.neugebauer@docker.com> Tested-by: Rolf Neugebauer <rolf.neugebauer@docker.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'kernel/irq/cpuhotplug.c')