/* * w1_io.c * * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include "w1.h" #include "w1_log.h" static int w1_delay_parm = 1; module_param_named(delay_coef, w1_delay_parm, int, 0); static int w1_disable_irqs = 0; module_param_named(disable_irqs, w1_disable_irqs, int, 0); static u8 w1_crc8_table[] = { 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98, 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255, 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7, 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154, 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36, 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185, 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205, 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80, 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238, 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115, 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139, 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22, 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168, 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53 }; static void w1_delay(unsigned long tm) { udelay(tm * w1_delay_parm); } static void w1_write_bit(struct w1_master *dev, int bit); static u8 w1_read_bit(struct w1_master *dev); /** * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level. * @dev: the master device * @bit: 0 - write a 0, 1 - write a 0 read the level */ static u8 w1_touch_bit(struct w1_master *dev, int bit) { if (dev->bus_master->touch_bit) return dev->bus_master->touch_bit(dev->bus_master->data, bit); else if (bit) return w1_read_bit(dev); else { w1_write_bit(dev, 0); return 0; } } /** * w1_write_bit() - Generates a write-0 or write-1 cycle. * @dev: the master device * @bit: bit to write * * Only call if dev->bus_master->touch_bit is NULL */ static void w1_write_bit(struct w1_master *dev, int bit) { unsigned long flags = 0; if(w1_disable_irqs) local_irq_save(flags); if (bit) { dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(6); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(64); } else { dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(60); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(10); } if(w1_disable_irqs) local_irq_restore(flags); } /** * w1_pre_write() - pre-write operations * @dev: the master device * * Pre-write operation, currently only supporting strong pullups. * Program the hardware for a strong pullup, if one has been requested and * the hardware supports it. */ static void w1_pre_write(struct w1_master *dev) { if (dev->pullup_duration && dev->enable_pullup && dev->bus_master->set_pullup) { dev->bus_master->set_pullup(dev->bus_master->data, dev->pullup_duration); } } /** * w1_post_write() - post-write options * @dev: the master device * * Post-write operation, currently only supporting strong pullups. * If a strong pullup was requested, clear it if the hardware supports * them, or execute the delay otherwise, in either case clear the request. */ static void w1_post_write(struct w1_master *dev) { if (dev->pullup_duration) { if (dev->enable_pullup && dev->bus_master->set_pullup) dev->bus_master->set_pullup(dev->bus_master->data, 0); else msleep(dev->pullup_duration); dev->pullup_duration = 0; } } /** * w1_write_8() - Writes 8 bits. * @dev: the master device * @byte: the byte to write */ void w1_write_8(struct w1_master *dev, u8 byte) { int i; if (dev->bus_master->write_byte) { w1_pre_write(dev); dev->bus_master->write_byte(dev->bus_master->data, byte); } else for (i = 0; i < 8; ++i) { if (i == 7) w1_pre_write(dev); w1_touch_bit(dev, (byte >> i) & 0x1); } w1_post_write(dev); } EXPORT_SYMBOL_GPL(w1_write_8); /** * w1_read_bit() - Generates a write-1 cycle and samples the level. * @dev: the master device * * Only call if dev->bus_master->touch_bit is NULL */ static u8 w1_read_bit(struct w1_master *dev) { int result; unsigned long flags = 0; /* sample timing is critical here */ local_irq_save(flags); dev->bus_master->write_bit(dev->bus_master->data, 0); w1_delay(6); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(9); result = dev->bus_master->read_bit(dev->bus_master->data); local_irq_restore(flags); w1_delay(55); return result & 0x1; } /** * w1_triplet() - * Does a triplet - used for searching ROM addresses. * @dev: the master device * @bdir: the bit to write if both id_bit and comp_bit are 0 * * Return bits: * bit 0 = id_bit * bit 1 = comp_bit * bit 2 = dir_taken * If both bits 0 & 1 are set, the search should be restarted. * * Return: bit fields - see above */ u8 w1_triplet(struct w1_master *dev, int bdir) { if (dev->bus_master->triplet) return dev->bus_master->triplet(dev->bus_master->data, bdir); else { u8 id_bit = w1_touch_bit(dev, 1); u8 comp_bit = w1_touch_bit(dev, 1); u8 retval; if (id_bit && comp_bit) return 0x03; /* error */ if (!id_bit && !comp_bit) { /* Both bits are valid, take the direction given */ retval = bdir ? 0x04 : 0; } else { /* Only one bit is valid, take that direction */ bdir = id_bit; retval = id_bit ? 0x05 : 0x02; } if (dev->bus_master->touch_bit) w1_touch_bit(dev, bdir); else w1_write_bit(dev, bdir); return retval; } } /** * w1_read_8() - Reads 8 bits. * @dev: the master device * * Return: the byte read */ u8 w1_read_8(struct w1_master *dev) { int i; u8 res = 0; if (dev->bus_master->read_byte) res = dev->bus_master->read_byte(dev->bus_master->data); else for (i = 0; i < 8; ++i) res |= (w1_touch_bit(dev,1) << i); return res; } EXPORT_SYMBOL_GPL(w1_read_8); /** * w1_write_block() - Writes a series of bytes. * @dev: the master device * @buf: pointer to the data to write * @len: the number of bytes to write */ void w1_write_block(struct w1_master *dev, const u8 *buf, int len) { int i; if (dev->bus_master->write_block) { w1_pre_write(dev); dev->bus_master->write_block(dev->bus_master->data, buf, len); } else for (i = 0; i < len; ++i) w1_write_8(dev, buf[i]); /* calls w1_pre_write */ w1_post_write(dev); } EXPORT_SYMBOL_GPL(w1_write_block); /** * w1_touch_block() - Touches a series of bytes. * @dev: the master device * @buf: pointer to the data to write * @len: the number of bytes to write */ void w1_touch_block(struct w1_master *dev, u8 *buf, int len) { int i, j; u8 tmp; for (i = 0; i < len; ++i) { tmp = 0; for (j = 0; j < 8; ++j) { if (j == 7) w1_pre_write(dev); tmp |= w1_touch_bit(dev, (buf[i] >> j) & 0x1) << j; } buf[i] = tmp; } } EXPORT_SYMBOL_GPL(w1_touch_block); /** * w1_read_block() - Reads a series of bytes. * @dev: the master device * @buf: pointer to the buffer to fill * @len: the number of bytes to read * Return: the number of bytes read */ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) { int i; u8 ret; if (dev->bus_master->read_block) ret = dev->bus_master->read_block(dev->bus_master->data, buf, len); else { for (i = 0; i < len; ++i) buf[i] = w1_read_8(dev); ret = len; } return ret; } EXPORT_SYMBOL_GPL(w1_read_block); /** * w1_reset_bus() - Issues a reset bus sequence. * @dev: the master device * Return: 0=Device present, 1=No device present or error */ int w1_reset_bus(struct w1_master *dev) { int result; unsigned long flags = 0; if(w1_disable_irqs) local_irq_save(flags); if (dev->bus_master->reset_bus) result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1; else { dev->bus_master->write_bit(dev->bus_master->data, 0); /* minimum 480, max ? us * be nice and sleep, except 18b20 spec lists 960us maximum, * so until we can sleep with microsecond accuracy, spin. * Feel free to come up with some other way to give up the * cpu for such a short amount of time AND get it back in * the maximum amount of time. */ w1_delay(500); dev->bus_master->write_bit(dev->bus_master->data, 1); w1_delay(70); result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1; /* minimum 70 (above) + 430 = 500 us * There aren't any timing requirements between a reset and * the following transactions. Sleeping is safe here. */ /* w1_delay(430); min required time */ msleep(1); } if(w1_disable_irqs) local_irq_restore(flags); return result; } EXPORT_SYMBOL_GPL(w1_reset_bus); u8 w1_calc_crc8(u8 * data, int len) { u8 crc = 0; while (len--) crc = w1_crc8_table[crc ^ *data++]; return crc; } EXPORT_SYMBOL_GPL(w1_calc_crc8); void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb) { dev->attempts++; if (dev->bus_master->search) dev->bus_master->search(dev->bus_master->data, dev, search_type, cb); else w1_search(dev, search_type, cb); } /** * w1_reset_select_slave() - reset and select a slave * @sl: the slave to select * * Resets the bus and then selects the slave by sending either a skip rom * or a rom match. A skip rom is issued if there is only one device * registered on the bus. * The w1 master lock must be held. * * Return: 0=success, anything else=error */ int w1_reset_select_slave(struct w1_slave *sl) { if (w1_reset_bus(sl->master)) return -1; if (sl->master->slave_count == 1) w1_write_8(sl->master, W1_SKIP_ROM); else { u8 match[9] = {W1_MATCH_ROM, }; u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); memcpy(&match[1], &rn, 8); w1_write_block(sl->master, match, 9); } return 0; } EXPORT_SYMBOL_GPL(w1_reset_select_slave); /** * w1_reset_resume_command() - resume instead of another match ROM * @dev: the master device * * When the workflow with a slave amongst many requires several * successive commands a reset between each, this function is similar * to doing a reset then a match ROM for the last matched ROM. The * advantage being that the matched ROM step is skipped in favor of the * resume command. The slave must support the command of course. * * If the bus has only one slave, traditionnaly the match ROM is skipped * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this * doesn't work of course, but the resume command is the next best thing. * * The w1 master lock must be held. */ int w1_reset_resume_command(struct w1_master *dev) { if (w1_reset_bus(dev)) return -1; /* This will make only the last matched slave perform a skip ROM. */ w1_write_8(dev, W1_RESUME_CMD); return 0; } EXPORT_SYMBOL_GPL(w1_reset_resume_command); /** * w1_next_pullup() - register for a strong pullup * @dev: the master device * @delay: time in milliseconds * * Put out a strong pull-up of the specified duration after the next write * operation. Not all hardware supports strong pullups. Hardware that * doesn't support strong pullups will sleep for the given time after the * write operation without a strong pullup. This is a one shot request for * the next write, specifying zero will clear a previous request. * The w1 master lock must be held. * * Return: 0=success, anything else=error */ void w1_next_pullup(struct w1_master *dev, int delay) { dev->pullup_duration = delay; } EXPORT_SYMBOL_GPL(w1_next_pullup); .h?h=nds-private-remove&id=e387dc122fc7c70c2a5df2567f4e2d1114f5a5da'>plain -rw-r--r--iw_portmap.h7688logplain -rw-r--r--mr_pool.h954logplain -rw-r--r--opa_port_info.h15063logplain -rw-r--r--opa_smi.h4417logplain