/*
* Copyright (C) 2010 Red Hat, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_quota.h"
#include "xfs_inode.h"
#include "xfs_btree.h"
#include "xfs_alloc_btree.h"
#include "xfs_alloc.h"
#include "xfs_error.h"
#include "xfs_extent_busy.h"
#include "xfs_discard.h"
#include "xfs_trace.h"
#include "xfs_log.h"
STATIC int
xfs_trim_extents(
struct xfs_mount *mp,
xfs_agnumber_t agno,
xfs_daddr_t start,
xfs_daddr_t end,
xfs_daddr_t minlen,
__uint64_t *blocks_trimmed)
{
struct block_device *bdev = mp->m_ddev_targp->bt_bdev;
struct xfs_btree_cur *cur;
struct xfs_buf *agbp;
struct xfs_perag *pag;
int error;
int i;
pag = xfs_perag_get(mp, agno);
error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
if (error || !agbp)
goto out_put_perag;
cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
/*
* Force out the log. This means any transactions that might have freed
* space before we took the AGF buffer lock are now on disk, and the
* volatile disk cache is flushed.
*/
xfs_log_force(mp, XFS_LOG_SYNC);
/*
* Look up the longest btree in the AGF and start with it.
*/
error = xfs_alloc_lookup_ge(cur, 0,
be32_to_cpu(XFS_BUF_TO_AGF(agbp)->agf_longest), &i);
if (error)
goto out_del_cursor;
/*
* Loop until we are done with all extents that are large
* enough to be worth discarding.
*/
while (i) {
xfs_agblock_t fbno;
xfs_extlen_t flen;
xfs_daddr_t dbno;
xfs_extlen_t dlen;
error = xfs_alloc_get_rec(cur, &fbno, &flen, &i);
if (error)
goto out_del_cursor;
XFS_WANT_CORRUPTED_GOTO(mp, i == 1, out_del_cursor);
ASSERT(flen <= be32_to_cpu(XFS_BUF_TO_AGF(agbp)->agf_longest));
/*
* use daddr format for all range/len calculations as that is
* the format the range/len variables are supplied in by
* userspace.
*/
dbno = XFS_AGB_TO_DADDR(mp, agno, fbno);
dlen = XFS_FSB_TO_BB(mp, flen);
/*
* Too small? Give up.
*/
if (dlen < minlen) {
trace_xfs_discard_toosmall(mp, agno, fbno, flen);
goto out_del_cursor;
}
/*
* If the extent is entirely outside of the range we are
* supposed to discard skip it. Do not bother to trim
* down partially overlapping ranges for now.
*/
if (dbno + dlen < start || dbno > end) {
trace_xfs_discard_exclude(mp, agno, fbno, flen);
goto next_extent;
}
/*
* If any blocks in the range are still busy, skip the
* discard and try again the next time.
*/
if (xfs_extent_busy_search(mp, agno, fbno, flen)) {
trace_xfs_discard_busy(mp, agno, fbno, flen);
goto next_extent;
}
trace_xfs_discard_extent(mp, agno, fbno, flen);
error = blkdev_issue_discard(bdev, dbno, dlen, GFP_NOFS, 0);
if (error)
goto out_del_cursor;
*blocks_trimmed += flen;
next_extent:
error = xfs_btree_decrement(cur, 0, &i);
if (error)
goto out_del_cursor;
}
out_del_cursor:
xfs_btree_del_cursor(cur, error ? XFS_BTREE_ERROR : XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
out_put_perag:
xfs_perag_put(pag);
return error;
}
/*
* trim a range of the filesystem.
*
* Note: the parameters passed from userspace are byte ranges into the
* filesystem which does not match to the format we use for filesystem block
* addressing. FSB addressing is sparse (AGNO|AGBNO), while the incoming format
* is a linear address range. Hence we need to use DADDR based conversions and
* comparisons for determining the correct offset and regions to trim.
*/
int
xfs_ioc_trim(
struct xfs_mount *mp,
struct fstrim_range __user *urange)
{
struct request_queue *q = bdev_get_queue(mp->m_ddev_targp->bt_bdev);
unsigned int granularity = q->limits.discard_granularity;
struct fstrim_range range;
xfs_daddr_t start, end, minlen;
xfs_agnumber_t start_agno, end_agno, agno;
__uint64_t blocks_trimmed = 0;
int error, last_error = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
if (copy_from_user(&range, urange, sizeof(range)))
return -EFAULT;
/*
* Truncating down the len isn't actually quite correct, but using
* BBTOB would mean we trivially get overflows for values
* of ULLONG_MAX or slightly lower. And ULLONG_MAX is the default
* used by the fstrim application. In the end it really doesn't
* matter as trimming blocks is an advisory interface.
*/
if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) ||
range.minlen > XFS_FSB_TO_B(mp, mp->m_ag_max_usable) ||
range.len < mp->m_sb.sb_blocksize)
return -EINVAL;
start = BTOBB(range.start);
end = start + BTOBBT(range.len) - 1;
minlen = BTOBB(max_t(u64, granularity, range.minlen));
if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1)
end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1;
start_agno = xfs_daddr_to_agno(mp, start);
end_agno = xfs_daddr_to_agno(mp, end);
for (agno = start_agno; agno <= end_agno; agno++) {
error = xfs_trim_extents(mp, agno, start, end, minlen,
&blocks_trimmed);
if (error)
last_error = error;
}
if (last_error)
return last_error;
range.len = XFS_FSB_TO_B(mp, blocks_trimmed);
if (copy_to_user(urange, &range, sizeof(range)))
return -EFAULT;
return 0;
}
int
xfs_discard_extents(
struct xfs_mount *mp,
struct list_head *list)
{
struct xfs_extent_busy *busyp;
int error = 0;
list_for_each_entry(busyp, list, list) {
trace_xfs_discard_extent(mp, busyp->agno, busyp->bno,
busyp->length);
error = blkdev_issue_discard(mp->m_ddev_targp->bt_bdev,
XFS_AGB_TO_DADDR(mp, busyp->agno, busyp->bno),
XFS_FSB_TO_BB(mp, busyp->length),
GFP_NOFS, 0);
if (error && error != -EOPNOTSUPP) {
xfs_info(mp,
"discard failed for extent [0x%llx,%u], error %d",
(unsigned long long)busyp->bno,
busyp->length,
error);
return error;
}
}
return 0;
}
n this SKU.
On the failing systems, this BIOS issue was not discovered when the
desktop motherboard was tested with Windows, because the BIOS also
neglects to provide the ACPI/CPPC table, that Windows requires to enable
HWP, and so Windows runs in legacy P-state mode, where this setting has
no effect.
Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and
so it runs in HWP mode, exposing this incorrect BIOS configuration.
There are several ways to address this problem.
First, Linux can also run in legacy P-state mode on this system.
As intel_pstate is how Linux enables HWP, booting with
"intel_pstate=disable"
will run in acpi-cpufreq/ondemand legacy p-state mode.
Or second, the "performance" governor can be used with intel_pstate,
which will modify HWP.EPP to 0.
Or third, starting in 4.10, the
/sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference
attribute in can be updated from "balance_power" to "performance".
Or fourth, apply this patch, which fixes the erroneous setting of
MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default
configuration to function as designed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>