/* * Copyright (C) 2016 Maxime Ripard * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ #define _DT_BINDINGS_CLK_SUN50I_A64_H_ #define CLK_BUS_MIPI_DSI 28 #define CLK_BUS_CE 29 #define CLK_BUS_DMA 30 #define CLK_BUS_MMC0 31 #define CLK_BUS_MMC1 32 #define CLK_BUS_MMC2 33 #define CLK_BUS_NAND 34 #define CLK_BUS_DRAM 35 #define CLK_BUS_EMAC 36 #define CLK_BUS_TS 37 #define CLK_BUS_HSTIMER 38 #define CLK_BUS_SPI0 39 #define CLK_BUS_SPI1 40 #define CLK_BUS_OTG 41 #define CLK_BUS_EHCI0 42 #define CLK_BUS_EHCI1 43 #define CLK_BUS_OHCI0 44 #define CLK_BUS_OHCI1 45 #define CLK_BUS_VE 46 #define CLK_BUS_TCON0 47 #define CLK_BUS_TCON1 48 #define CLK_BUS_DEINTERLACE 49 #define CLK_BUS_CSI 50 #define CLK_BUS_HDMI 51 #define CLK_BUS_DE 52 #define CLK_BUS_GPU 53 #define CLK_BUS_MSGBOX 54 #define CLK_BUS_SPINLOCK 55 #define CLK_BUS_CODEC 56 #define CLK_BUS_SPDIF 57 #define CLK_BUS_PIO 58 #define CLK_BUS_THS 59 #define CLK_BUS_I2S0 60 #define CLK_BUS_I2S1 61 #define CLK_BUS_I2S2 62 #define CLK_BUS_I2C0 63 #define CLK_BUS_I2C1 64 #define CLK_BUS_I2C2 65 #define CLK_BUS_SCR 66 #define CLK_BUS_UART0 67 #define CLK_BUS_UART1 68 #define CLK_BUS_UART2 69 #define CLK_BUS_UART3 70 #define CLK_BUS_UART4 71 #define CLK_BUS_DBG 72 #define CLK_THS 73 #define CLK_NAND 74 #define CLK_MMC0 75 #define CLK_MMC1 76 #define CLK_MMC2 77 #define CLK_TS 78 #define CLK_CE 79 #define CLK_SPI0 80 #define CLK_SPI1 81 #define CLK_I2S0 82 #define CLK_I2S1 83 #define CLK_I2S2 84 #define CLK_SPDIF 85 #define CLK_USB_PHY0 86 #define CLK_USB_PHY1 87 #define CLK_USB_HSIC 88 #define CLK_USB_HSIC_12M 89 #define CLK_USB_OHCI0 91 #define CLK_USB_OHCI1 93 #define CLK_DRAM_VE 95 #define CLK_DRAM_CSI 96 #define CLK_DRAM_DEINTERLACE 97 #define CLK_DRAM_TS 98 #define CLK_DE 99 #define CLK_TCON0 100 #define CLK_TCON1 101 #define CLK_DEINTERLACE 102 #define CLK_CSI_MISC 103 #define CLK_CSI_SCLK 104 #define CLK_CSI_MCLK 105 #define CLK_VE 106 #define CLK_AC_DIG 107 #define CLK_AC_DIG_4X 108 #define CLK_AVS 109 #define CLK_HDMI 110 #define CLK_HDMI_DDC 111 #define CLK_DSI_DPHY 113 #define CLK_GPU 114 #endif /* _DT_BINDINGS_CLK_SUN50I_H_ */ tworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-04net: ipv6: Change notifications for multipath delete to RTA_MULTIPATHDavid Ahern2-1/+28 If an entire multipath route is deleted using prefix and len (without any nexthops), send a single RTM_DELROUTE notification with the full route using RTA_MULTIPATH. This is done by generating the skb before the route delete when all of the sibling routes are still present but sending it after the route has been removed from the FIB. The skip_notify flag is used to tell the lower fib code not to send notifications for the individual nexthop routes. If a route is deleted using RTA_MULTIPATH for any nexthops or a single nexthop entry is deleted, then the nexthops are deleted one at a time with notifications sent as each hop is deleted. This is necessary given that IPv6 allows individual hops within a route to be deleted. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-04net: ipv6: Change notifications for multipath add to RTA_MULTIPATHDavid Ahern2-3/+53 Change ip6_route_multipath_add to send one notifciation with the full route encoded with RTA_MULTIPATH instead of a series of individual routes. This is done by adding a skip_notify flag to the nl_info struct. The flag is used to skip sending of the notification in the fib code that actually inserts the route. Once the full route has been added, a notification is generated with all nexthops. ip6_route_multipath_add handles 3 use cases: new routes, route replace, and route append. The multipath notification generated needs to be consistent with the order of the nexthops and it should be consistent with the order in a FIB dump which means the route with the first nexthop needs to be used as the route reference. For the first 2 cases (new and replace), a reference to the route used to send the notification is obtained by saving the first route added. For the append case, the last route added is used to loop back to its first sibling route which is the first nexthop in the multipath route. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-04net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attributeDavid Ahern2-17/+105 IPv6 returns multipath routes as a series of individual routes making their display and handling by userspace different and more complicated than IPv4, putting the burden on the user to see that a route is part of a multipath route and internally creating a multipath route if desired (e.g., libnl does this as of commit 29b71371e764). This patch addresses this difference, allowing multipath routes to be returned using the RTA_MULTIPATH attribute. The end result is that IPv6 multipath routes can be treated and displayed in a format similar to IPv4: $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:200::/120 metric 1024 nexthop via 2001:db8:1::2 dev eth1 weight 1 nexthop via 2001:db8:2::2 dev eth2 weight 1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-04net: ipv6: Allow shorthand delete of all nexthops in multipath routeDavid Ahern1-2/+36 IPv4 allows multipath routes to be deleted using just the prefix and length. For example: $ ip ro ls vrf red unreachable default metric 8192 1.1.1.0/24 nexthop via 10.100.1.254 dev eth1 weight 1 nexthop via 10.11.200.2 dev eth11.200 weight 1 10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3 $ ip ro del 1.1.1.0/24 vrf red $ ip ro ls vrf red unreachable default metric 8192 10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3 The same notation does not work with IPv6 because of how multipath routes are implemented for IPv6. For IPv6 only the first nexthop of a multipath route is deleted if the request contains only a prefix and length. This leads to unnecessary complexity in userspace dealing with IPv6 multipath routes. This patch allows all nexthops to be deleted without specifying each one in the delete request. Internally, this is done by walking the sibling list of the route matching the specifications given (prefix, length, metric, protocol, etc). $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:200::/120 via 2001:db8:1::2 dev eth1 metric 1024 pref medium 2001:db8:200::/120 via 2001:db8:2::2 dev eth2 metric 1024 pref medium ... $ ip -6 ro del vrf red 2001:db8:200::/120 $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium ... Because IPv6 allows individual nexthops to be deleted without deleting the entire route, the ip6_route_multipath_del and non-multipath code path (ip6_route_del) have to be discriminated so that all nexthops are only deleted for the latter case. This is done by making the existing fc_type in fib6_config a u16 and then adding a new u16 field with fc_delete_all_nh as the first bit. Suggested-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller7-39/+28 Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from sk_buff so we only access one single cacheline in the conntrack hotpath. Patchset from Florian Westphal. 2) Don't leak pointer to internal structures when exporting x_tables ruleset back to userspace, from Willem DeBruijn. This includes new helper functions to copy data to userspace such as xt_data_to_user() as well as conversions of our ip_tables, ip6_tables and arp_tables clients to use it. Not surprinsingly, ebtables requires an ad-hoc update. There is also a new field in x_tables extensions to indicate the amount of bytes that we copy to userspace. 3) Add nf_log_all_netns sysctl: This new knob allows you to enable logging via nf_log infrastructure for all existing netnamespaces. Given the effort to provide pernet syslog has been discontinued, let's provide a way to restore logging using netfilter kernel logging facilities in trusted environments. Patch from Michal Kubecek. 4) Validate SCTP checksum from conntrack helper, from Davide Caratti. 5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly a copy&paste from the original helper, from Florian Westphal. 6) Reset netfilter state when duplicating packets, also from Florian. 7) Remove unnecessary check for broadcast in IPv6 in pkttype match and nft_meta, from Liping Zhang. 8) Add missing code to deal with loopback packets from nft_meta when used by the netdev family, also from Liping. 9) Several cleanups on nf_tables, one to remove unnecessary check from the netlink control plane path to add table, set and stateful objects and code consolidation when unregister chain hooks, from Gao Feng. 10) Fix harmless reference counter underflow in IPVS that, however, results in problems with the introduction of the new refcount_t type, from David Windsor. 11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp, from Davide Caratti. 12) Missing documentation on nf_tables uapi header, from Liping Zhang. 13) Use rb_entry() helper in xt_connlimit, from Geliang Tang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net: ipv6: Set protocol to kernel for local routesDavid Ahern1-0/+1 IPv6 stack does not set the protocol for local routes, so those routes show up with proto "none": $ ip -6 ro ls table local local ::1 dev lo proto none metric 0 pref medium local 2100:3:: dev lo proto none metric 0 pref medium local 2100:3::4 dev lo proto none metric 0 pref medium local fe80:: dev lo proto none metric 0 pref medium ... Set rt6i_protocol to RTPROT_KERNEL for consistency with IPv4. Now routes show up with proto "kernel": $ ip -6 ro ls table local local ::1 dev lo proto kernel metric 0 pref medium local 2100:3:: dev lo proto kernel metric 0 pref medium local 2100:3::4 dev lo proto kernel metric 0 pref medium local fe80:: dev lo proto kernel metric 0 pref medium ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03tcp: add tcp_mss_clamp() helperEric Dumazet1-4/+1 Small cleanup factorizing code doing the TCP_MAXSEG clamping. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+2 All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02netfilter: allow logging from non-init namespacesMichal Kubeček1-1/+1 Commit 69b34fb996b2 ("netfilter: xt_LOG: add net namespace support for xt_LOG") disabled logging packets using the LOG target from non-init namespaces. The motivation was to prevent containers from flooding kernel log of the host. The plan was to keep it that way until syslog namespace implementation allows containers to log in a safe way. However, the work on syslog namespace seems to have hit a dead end somewhere in 2013 and there are users who want to use xt_LOG in all network namespaces. This patch allows to do so by setting /proc/sys/net/netfilter/nf_log_all_netns to a nonzero value. This sysctl is only accessible from init_net so that one cannot switch the behaviour from inside a container. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: merge ctinfo into nfct pointer storage areaFlorian Westphal1-1/+1 After this change conntrack operations (lookup, creation, matching from ruleset) only access one instead of two sk_buff cache lines. This works for normal conntracks because those are allocated from a slab that guarantees hw cacheline or 8byte alignment (whatever is larger) so the 3 bits needed for ctinfo won't overlap with nf_conn addresses. Template allocation now does manual address alignment (see previous change) on arches that don't have sufficent kmalloc min alignment. Some spots intentionally use skb->_nfct instead of skb_nfct() helpers, this is to avoid undoing the skb_nfct() use when we remove untracked conntrack object in the future. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: add and use nf_ct_set helperFlorian Westphal3-8/+4 Add a helper to assign a nf_conn entry and the ctinfo bits to an sk_buff. This avoids changing code in followup patch that merges skb->nfct and skb->nfctinfo into skb->_nfct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02skbuff: add and use skb_nfct helperFlorian Westphal3-8/+8 Followup patch renames skb->nfct and changes its type so add a helper to avoid intrusive rename change later. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: reset netfilter state when duplicating packetFlorian Westphal1-1/+1 We should also toss nf_bridge_info, if any -- packet is leaving via ip_local_out, also, this skb isn't bridged -- it is a locally generated copy. Also this avoids the need to touch this later when skb->nfct is replaced with 'unsigned long _nfct' in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: conntrack: no need to pass ctinfo to error handlerFlorian Westphal1-6/+6 It is never accessed for reading and the only places that write to it are the icmp(6) handlers, which also set skb->nfct (and skb->nfctinfo). The conntrack core specifically checks for attached skb->nfct after ->error() invocation and returns early in this case. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>