/* * Copyright (C) 2016 Maxime Ripard * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ #define _DT_BINDINGS_CLK_SUN50I_A64_H_ #define CLK_BUS_MIPI_DSI 28 #define CLK_BUS_CE 29 #define CLK_BUS_DMA 30 #define CLK_BUS_MMC0 31 #define CLK_BUS_MMC1 32 #define CLK_BUS_MMC2 33 #define CLK_BUS_NAND 34 #define CLK_BUS_DRAM 35 #define CLK_BUS_EMAC 36 #define CLK_BUS_TS 37 #define CLK_BUS_HSTIMER 38 #define CLK_BUS_SPI0 39 #define CLK_BUS_SPI1 40 #define CLK_BUS_OTG 41 #define CLK_BUS_EHCI0 42 #define CLK_BUS_EHCI1 43 #define CLK_BUS_OHCI0 44 #define CLK_BUS_OHCI1 45 #define CLK_BUS_VE 46 #define CLK_BUS_TCON0 47 #define CLK_BUS_TCON1 48 #define CLK_BUS_DEINTERLACE 49 #define CLK_BUS_CSI 50 #define CLK_BUS_HDMI 51 #define CLK_BUS_DE 52 #define CLK_BUS_GPU 53 #define CLK_BUS_MSGBOX 54 #define CLK_BUS_SPINLOCK 55 #define CLK_BUS_CODEC 56 #define CLK_BUS_SPDIF 57 #define CLK_BUS_PIO 58 #define CLK_BUS_THS 59 #define CLK_BUS_I2S0 60 #define CLK_BUS_I2S1 61 #define CLK_BUS_I2S2 62 #define CLK_BUS_I2C0 63 #define CLK_BUS_I2C1 64 #define CLK_BUS_I2C2 65 #define CLK_BUS_SCR 66 #define CLK_BUS_UART0 67 #define CLK_BUS_UART1 68 #define CLK_BUS_UART2 69 #define CLK_BUS_UART3 70 #define CLK_BUS_UART4 71 #define CLK_BUS_DBG 72 #define CLK_THS 73 #define CLK_NAND 74 #define CLK_MMC0 75 #define CLK_MMC1 76 #define CLK_MMC2 77 #define CLK_TS 78 #define CLK_CE 79 #define CLK_SPI0 80 #define CLK_SPI1 81 #define CLK_I2S0 82 #define CLK_I2S1 83 #define CLK_I2S2 84 #define CLK_SPDIF 85 #define CLK_USB_PHY0 86 #define CLK_USB_PHY1 87 #define CLK_USB_HSIC 88 #define CLK_USB_HSIC_12M 89 #define CLK_USB_OHCI0 91 #define CLK_USB_OHCI1 93 #define CLK_DRAM_VE 95 #define CLK_DRAM_CSI 96 #define CLK_DRAM_DEINTERLACE 97 #define CLK_DRAM_TS 98 #define CLK_DE 99 #define CLK_TCON0 100 #define CLK_TCON1 101 #define CLK_DEINTERLACE 102 #define CLK_CSI_MISC 103 #define CLK_CSI_SCLK 104 #define CLK_CSI_MCLK 105 #define CLK_VE 106 #define CLK_AC_DIG 107 #define CLK_AC_DIG_4X 108 #define CLK_AVS 109 #define CLK_HDMI 110 #define CLK_HDMI_DDC 111 #define CLK_DSI_DPHY 113 #define CLK_GPU 114 #endif /* _DT_BINDINGS_CLK_SUN50I_H_ */ +0100'>2017-02-08netfilter: nft_exthdr: add TCP option matchingManuel Messner2-15/+108 This patch implements the kernel side of the TCP option patch. Signed-off-by: Manuel Messner <mm@skelett.io> Reviewed-by: Florian Westphal <fw@strlen.de> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nft_ct: add zone id set supportFlorian Westphal1-1/+143 zones allow tracking multiple connections sharing identical tuples, this is needed e.g. when tracking distinct vlans with overlapping ip addresses (conntrack is l2 agnostic). Thus the zone has to be set before the packet is picked up by the connection tracker. This is done by means of 'conntrack templates' which are conntrack structures used solely to pass this info from one netfilter hook to the next. The iptables CT target instantiates these connection tracking templates once per rule, i.e. the template is fixed/tied to particular zone, can be read-only and therefore be re-used by as many skbs simultaneously as needed. We can't follow this model because we want to take the zone id from an sreg at rule eval time so we could e.g. fill in the zone id from the packets vlan id or a e.g. nftables key : value maps. To avoid cost of per packet alloc/free of the template, use a percpu template 'scratch' object and use the refcount to detect the (unlikely) case where the template is still attached to another skb (i.e., previous skb was nfqueued ...). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nft_ct: prepare for key-dependent error unwindFlorian Westphal1-14/+15 Next patch will add ZONE_ID set support which will need similar error unwind (put operation) as conntrack labels. Prepare for this: remove the 'label_got' boolean in favor of a switch statement that can be extended in next patch. As we already have that in the set_destroy function place that in a separate function and call it from the set init function. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nft_ct: add zone id get supportFlorian Westphal1-3/+19 Just like with counters the direction attribute is optional. We set priv->dir to MAX unconditionally to avoid duplicating the assignment for all keys with optional direction. For keys where direction is mandatory, existing code already returns an error. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: add bitmap set typePablo Neira Ayuso3-0/+321 This patch adds a new bitmap set type. This bitmap uses two bits to represent one element. These two bits determine the element state in the current and the future generation that fits into the nf_tables commit protocol. When dumping elements back to userspace, the two bits are expanded into a struct nft_set_ext object. If no NFTA_SET_DESC_SIZE is specified, the existing automatic set backend selection prefers bitmap over hash in case of keys whose size is <= 16 bit. If the set size is know, the bitmap set type is selected if with 16 bit kets and more than 390 elements in the set, otherwise the hash table set implementation is used. For 8 bit keys, the bitmap consumes 66 bytes. For 16 bit keys, the bitmap takes 16388 bytes. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: add space notation to setsPablo Neira Ayuso3-5/+19 The space notation allows us to classify the set backend implementation based on the amount of required memory. This provides an order of the set representation scalability in terms of memory. The size field is still left in place so use this if the userspace provides no explicit number of elements, so we cannot calculate the real memory that this set needs. This also helps us break ties in the set backend selection routine, eg. two backend implementations provide the same performance. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: rename struct nft_set_estimate class fieldPablo Neira Ayuso3-8/+8 Use lookup as field name instead, to prepare the introduction of the memory class in a follow up patch. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: add flush field to struct nft_set_iterPablo Neira Ayuso1-0/+4 This provides context to walk callback iterator, thus, we know if the walk happens from the set flush path. This is required by the new bitmap set type coming in a follow up patch which has no real struct nft_set_ext, so it has to allocate it based on the two bit compact element representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: rename deactivate_one() to flush()Pablo Neira Ayuso3-9/+9 Although semantics are similar to deactivate() with no implicit element lookup, this is only called from the set flush path, so better rename this to flush(). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: use struct nft_set_iter in set element flushPablo Neira Ayuso1-7/+5 Instead of struct nft_set_dump_args, remove unnecessary wrapper structure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nf_tables: pass netns to set->ops->remove()Pablo Neira Ayuso3-5/+7 This new parameter is required by the new bitmap set type that comes in a follow up patch. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-08netfilter: nft_exthdr: Add support for existence checkPhil Sutter1-2/+20 If NFT_EXTHDR_F_PRESENT is set, exthdr will not copy any header field data into *dest, but instead set it to 1 if the header is found and 0 otherwise. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-03net: skb_needs_check() accepts CHECKSUM_NONE for txEric Dumazet1-3/+4 My recent change missed fact that UFO would perform a complete UDP checksum before segmenting in frags. In this case skb->ip_summed is set to CHECKSUM_NONE. We need to add this valid case to skb_needs_check() Fixes: b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net: remove support for per driver ndo_busy_poll()Eric Dumazet2-16/+0 We added generic support for busy polling in NAPI layer in linux-4.5 No network driver uses ndo_busy_poll() anymore, we can get rid of the pointer in struct net_device_ops, and its use in sk_busy_loop() Saves NETIF_F_BUSY_POLL features bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller53-640/+576 Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from sk_buff so we only access one single cacheline in the conntrack hotpath. Patchset from Florian Westphal. 2) Don't leak pointer to internal structures when exporting x_tables ruleset back to userspace, from Willem DeBruijn. This includes new helper functions to copy data to userspace such as xt_data_to_user() as well as conversions of our ip_tables, ip6_tables and arp_tables clients to use it. Not surprinsingly, ebtables requires an ad-hoc update. There is also a new field in x_tables extensions to indicate the amount of bytes that we copy to userspace. 3) Add nf_log_all_netns sysctl: This new knob allows you to enable logging via nf_log infrastructure for all existing netnamespaces. Given the effort to provide pernet syslog has been discontinued, let's provide a way to restore logging using netfilter kernel logging facilities in trusted environments. Patch from Michal Kubecek. 4) Validate SCTP checksum from conntrack helper, from Davide Caratti. 5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly a copy&paste from the original helper, from Florian Westphal. 6) Reset netfilter state when duplicating packets, also from Florian. 7) Remove unnecessary check for broadcast in IPv6 in pkttype match and nft_meta, from Liping Zhang. 8) Add missing code to deal with loopback packets from nft_meta when used by the netdev family, also from Liping. 9) Several cleanups on nf_tables, one to remove unnecessary check from the netlink control plane path to add table, set and stateful objects and code consolidation when unregister chain hooks, from Gao Feng. 10) Fix harmless reference counter underflow in IPVS that, however, results in problems with the introduction of the new refcount_t type, from David Windsor. 11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp, from Davide Caratti. 12) Missing documentation on nf_tables uapi header, from Liping Zhang. 13) Use rb_entry() helper in xt_connlimit, from Geliang Tang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03sched: cls_flower: expose priority to offloading netdeviceJiri Pirko1-0/+3 The driver that offloads flower rules needs to know with which priority user inserted the rules. So add this information into offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03tcp: clear pfmemalloc on outgoing skbEric Dumazet1-0/+7 Josef Bacik diagnosed following problem : I was seeing random disconnects while testing NBD over loopback. This turned out to be because NBD sets pfmemalloc on it's socket, however the receiving side is a user space application so does not have pfmemalloc set on its socket. This means that sk_filter_trim_cap will simply drop this packet, under the assumption that the other side will simply retransmit. Well we do retransmit, and then the packet is just dropped again for the same reason. It seems the better way to address this problem is to clear pfmemalloc in the TCP transmit path. pfmemalloc strict control really makes sense on the receive path. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net: ipv6: Set protocol to kernel for local routesDavid Ahern1-0/+1 IPv6 stack does not set the protocol for local routes, so those routes show up with proto "none": $ ip -6 ro ls table local local ::1 dev lo proto none metric 0 pref medium local 2100:3:: dev lo proto none metric 0 pref medium local 2100:3::4 dev lo proto none metric 0 pref medium local fe80:: dev lo proto none metric 0 pref medium ... Set rt6i_protocol to RTPROT_KERNEL for consistency with IPv4. Now routes show up with proto "kernel": $ ip -6 ro ls table local local ::1 dev lo proto kernel metric 0 pref medium local 2100:3:: dev lo proto kernel metric 0 pref medium local 2100:3::4 dev lo proto kernel metric 0 pref medium local fe80:: dev lo proto kernel metric 0 pref medium ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03bridge: vlan dst_metadata hooks in ingress and egress pathsRoopa Prabhu6-2/+82 - ingress hook: - if port is a tunnel port, use tunnel info in attached dst_metadata to map it to a local vlan - egress hook: - if port is a tunnel port, use tunnel info attached to vlan to set dst_metadata on the skb CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03bridge: per vlan dst_metadata netlink supportRoopa Prabhu7-48/+641 This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net/sched: act_ife: Change to use ife moduleYotam Gigi2-78/+33 Use the encode/decode functionality from the ife module instead of using implementation inside the act_ife. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net: Introduce ife encapsulation moduleYotam Gigi5-0/+165 This module is responsible for the ife encapsulation protocol encode/decode logics. That module can: - ife_encode: encode skb and reserve space for the ife meta header - ife_decode: decode skb and extract the meta header size - ife_tlv_meta_encode - encodes one tlv entry into the reserved ife header space. - ife_tlv_meta_decode - decodes one tlv entry from the packet - ife_tlv_meta_next - advance to the next tlv Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net/sched: act_ife: Unexport ife_tlv_meta_encodeYotam Gigi1-2/+2 As the function ife_tlv_meta_encode is not used by any other module, unexport it and make it static for the act_ife module. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03tcp: add tcp_mss_clamp() helperEric Dumazet