/*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _DT_BINDINGS_RESET_MSM_GCC_8660_H
#define _DT_BINDINGS_RESET_MSM_GCC_8660_H
#define AFAB_CORE_RESET 0
#define SCSS_SYS_RESET 1
#define SCSS_SYS_POR_RESET 2
#define AFAB_SMPSS_S_RESET 3
#define AFAB_SMPSS_M1_RESET 4
#define AFAB_SMPSS_M0_RESET 5
#define AFAB_EBI1_S_RESET 6
#define SFAB_CORE_RESET 7
#define SFAB_ADM0_M0_RESET 8
#define SFAB_ADM0_M1_RESET 9
#define SFAB_ADM0_M2_RESET 10
#define ADM0_C2_RESET 11
#define ADM0_C1_RESET 12
#define ADM0_C0_RESET 13
#define ADM0_PBUS_RESET 14
#define ADM0_RESET 15
#define SFAB_ADM1_M0_RESET 16
#define SFAB_ADM1_M1_RESET 17
#define SFAB_ADM1_M2_RESET 18
#define MMFAB_ADM1_M3_RESET 19
#define ADM1_C3_RESET 20
#define ADM1_C2_RESET 21
#define ADM1_C1_RESET 22
#define ADM1_C0_RESET 23
#define ADM1_PBUS_RESET 24
#define ADM1_RESET 25
#define IMEM0_RESET 26
#define SFAB_LPASS_Q6_RESET 27
#define SFAB_AFAB_M_RESET 28
#define AFAB_SFAB_M0_RESET 29
#define AFAB_SFAB_M1_RESET 30
#define DFAB_CORE_RESET 31
#define SFAB_DFAB_M_RESET 32
#define DFAB_SFAB_M_RESET 33
#define DFAB_SWAY0_RESET 34
#define DFAB_SWAY1_RESET 35
#define DFAB_ARB0_RESET 36
#define DFAB_ARB1_RESET 37
#define PPSS_PROC_RESET 38
#define PPSS_RESET 39
#define PMEM_RESET 40
#define DMA_BAM_RESET 41
#define SIC_RESET 42
#define SPS_TIC_RESET 43
#define CFBP0_RESET 44
#define CFBP1_RESET 45
#define CFBP2_RESET 46
#define EBI2_RESET 47
#define SFAB_CFPB_M_RESET 48
#define CFPB_MASTER_RESET 49
#define SFAB_CFPB_S_RESET 50
#define CFPB_SPLITTER_RESET 51
#define TSIF_RESET 52
#define CE1_RESET 53
#define CE2_RESET 54
#define SFAB_SFPB_M_RESET 55
#define SFAB_SFPB_S_RESET 56
#define RPM_PROC_RESET 57
#define RPM_BUS_RESET 58
#define RPM_MSG_RAM_RESET 59
#define PMIC_ARB0_RESET 60
#define PMIC_ARB1_RESET 61
#define PMIC_SSBI2_RESET 62
#define SDC1_RESET 63
#define SDC2_RESET 64
#define SDC3_RESET 65
#define SDC4_RESET 66
#define SDC5_RESET 67
#define USB_HS1_RESET 68
#define USB_HS2_XCVR_RESET 69
#define USB_HS2_RESET 70
#define USB_FS1_XCVR_RESET 71
#define USB_FS1_RESET 72
#define USB_FS2_XCVR_RESET 73
#define USB_FS2_RESET 74
#define GSBI1_RESET 75
#define GSBI2_RESET 76
#define GSBI3_RESET 77
#define GSBI4_RESET 78
#define GSBI5_RESET 79
#define GSBI6_RESET 80
#define GSBI7_RESET 81
#define GSBI8_RESET 82
#define GSBI9_RESET 83
#define GSBI10_RESET 84
#define GSBI11_RESET 85
#define GSBI12_RESET 86
#define SPDM_RESET 87
#define SEC_CTRL_RESET 88
#define TLMM_H_RESET 89
#define TLMM_RESET 90
#define MARRM_PWRON_RESET 91
#define MARM_RESET 92
#define MAHB1_RESET 93
#define SFAB_MSS_S_RESET 94
#define MAHB2_RESET 95
#define MODEM_SW_AHB_RESET 96
#define MODEM_RESET 97
#define SFAB_MSS_MDM1_RESET 98
#define SFAB_MSS_MDM0_RESET 99
#define MSS_SLP_RESET 100
#define MSS_MARM_SAW_RESET 101
#define MSS_WDOG_RESET 102
#define TSSC_RESET 103
#define PDM_RESET 104
#define SCSS_CORE0_RESET 105
#define SCSS_CORE0_POR_RESET 106
#define SCSS_CORE1_RESET 107
#define SCSS_CORE1_POR_RESET 108
#define MPM_RESET 109
#define EBI1_1X_DIV_RESET 110
#define EBI1_RESET 111
#define SFAB_SMPSS_S_RESET 112
#define USB_PHY0_RESET 113
#define USB_PHY1_RESET 114
#define PRNG_RESET 115
#endif
'10'>1015 20 25 30 35 40 space: include ignore mode: unified ssdiff stat only drm: Don't race connector registration
I was under the misconception that the sysfs dev stuff can be fully
set up, and then registered all in one step with device_add. That's
true for properties and property groups, but not for parents and child
devices. Those must be fully registered before you can register a
child.
Add a bit of tracking to make sure that asynchronous mst connector
hotplugging gets this right. For consistency we rely upon the implicit
barriers of the connector->mutex, which is taken anyway, to ensure
that at least either the connector or device registration call will
work out.
Mildly tested since I can't reliably reproduce this on my mst box
here.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch