/*
* adv7842 - Analog Devices ADV7842 video decoder driver
*
* Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
*
* This program is free software; you may redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#ifndef _ADV7842_
#define _ADV7842_
/* Analog input muxing modes (AFE register 0x02, [2:0]) */
enum adv7842_ain_sel {
ADV7842_AIN1_2_3_NC_SYNC_1_2 = 0,
ADV7842_AIN4_5_6_NC_SYNC_2_1 = 1,
ADV7842_AIN7_8_9_NC_SYNC_3_1 = 2,
ADV7842_AIN10_11_12_NC_SYNC_4_1 = 3,
ADV7842_AIN9_4_5_6_SYNC_2_1 = 4,
};
/*
* Bus rotation and reordering. This is used to specify component reordering on
* the board and describes the components order on the bus when the ADV7842
* outputs RGB.
*/
enum adv7842_bus_order {
ADV7842_BUS_ORDER_RGB, /* No operation */
ADV7842_BUS_ORDER_GRB, /* Swap 1-2 */
ADV7842_BUS_ORDER_RBG, /* Swap 2-3 */
ADV7842_BUS_ORDER_BGR, /* Swap 1-3 */
ADV7842_BUS_ORDER_BRG, /* Rotate right */
ADV7842_BUS_ORDER_GBR, /* Rotate left */
};
/* Input Color Space (IO register 0x02, [7:4]) */
enum adv7842_inp_color_space {
ADV7842_INP_COLOR_SPACE_LIM_RGB = 0,
ADV7842_INP_COLOR_SPACE_FULL_RGB = 1,
ADV7842_INP_COLOR_SPACE_LIM_YCbCr_601 = 2,
ADV7842_INP_COLOR_SPACE_LIM_YCbCr_709 = 3,
ADV7842_INP_COLOR_SPACE_XVYCC_601 = 4,
ADV7842_INP_COLOR_SPACE_XVYCC_709 = 5,
ADV7842_INP_COLOR_SPACE_FULL_YCbCr_601 = 6,
ADV7842_INP_COLOR_SPACE_FULL_YCbCr_709 = 7,
ADV7842_INP_COLOR_SPACE_AUTO = 0xf,
};
/* Select output format (IO register 0x03, [4:2]) */
enum adv7842_op_format_mode_sel {
ADV7842_OP_FORMAT_MODE0 = 0x00,
ADV7842_OP_FORMAT_MODE1 = 0x04,
ADV7842_OP_FORMAT_MODE2 = 0x08,
};
/* Mode of operation */
enum adv7842_mode {
ADV7842_MODE_SDP,
ADV7842_MODE_COMP,
ADV7842_MODE_RGB,
ADV7842_MODE_HDMI
};
/* Video standard select (IO register 0x00, [5:0]) */
enum adv7842_vid_std_select {
/* SDP */
ADV7842_SDP_VID_STD_CVBS_SD_4x1 = 0x01,
ADV7842_SDP_VID_STD_YC_SD4_x1 = 0x09,
/* RGB */
ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE = 0x07,
/* HDMI GR */
ADV7842_HDMI_GR_VID_STD_AUTO_GRAPH_MODE = 0x02,
/* HDMI COMP */
ADV7842_HDMI_COMP_VID_STD_HD_1250P = 0x1e,
};
enum adv7842_select_input {
ADV7842_SELECT_HDMI_PORT_A,
ADV7842_SELECT_HDMI_PORT_B,
ADV7842_SELECT_VGA_RGB,
ADV7842_SELECT_VGA_COMP,
ADV7842_SELECT_SDP_CVBS,
ADV7842_SELECT_SDP_YC,
};
enum adv7842_drive_strength {
ADV7842_DR_STR_LOW = 0,
ADV7842_DR_STR_MEDIUM_LOW = 1,
ADV7842_DR_STR_MEDIUM_HIGH = 2,
ADV7842_DR_STR_HIGH = 3,
};
struct adv7842_sdp_csc_coeff {
bool manual;
u16 scaling;
u16 A1;
u16 A2;
u16 A3;
u16 A4;
u16 B1;
u16 B2;
u16 B3;
u16 B4;
u16 C1;
u16 C2;
u16 C3;
u16 C4;
};
struct adv7842_sdp_io_sync_adjustment {
bool adjust;
u16 hs_beg;
u16 hs_width;
u16 de_beg;
u16 de_end;
u8 vs_beg_o;
u8 vs_beg_e;
u8 vs_end_o;
u8 vs_end_e;
u8 de_v_beg_o;
u8 de_v_beg_e;
u8 de_v_end_o;
u8 de_v_end_e;
};
/* Platform dependent definition */
struct adv7842_platform_data {
/* chip reset during probe */
unsigned chip_reset:1;
/* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */
unsigned disable_pwrdnb:1;
/* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */
unsigned disable_cable_det_rst:1;
/* Analog input muxing mode */
enum adv7842_ain_sel ain_sel;
/* Bus rotation and reordering */
enum adv7842_bus_order bus_order;
/* Select output format mode */
enum adv7842_op_format_mode_sel op_format_mode_sel;
/* Default mode */
enum adv7842_mode mode;
/* Default input */
unsigned input;
/* Video standard */
enum adv7842_vid_std_select vid_std_select;
/* IO register 0x02 */
unsigned alt_gamma:1;
/* IO register 0x05 */
unsigned blank_data:1;
unsigned insert_av_codes:1;
unsigned replicate_av_codes:1;
/* IO register 0x30 */
unsigned output_bus_lsb_to_msb:1;
/* IO register 0x14 */
enum adv7842_drive_strength dr_str_data;
enum adv7842_drive_strength dr_str_clk;
enum adv7842_drive_strength dr_str_sync;
/*
* IO register 0x19: Adjustment to the LLC DLL phase in
* increments of 1/32 of a clock period.
*/
unsigned llc_dll_phase:5;
/* External RAM for 3-D comb or frame synchronizer */
unsigned sd_ram_size; /* ram size in MB */
unsigned sd_ram_ddr:1; /* ddr or sdr sdram */
/* HDMI free run, CP-reg 0xBA */
unsigned hdmi_free_run_enable:1;
/* 0 = Mode 0: run when there is no TMDS clock
1 = Mode 1: run when there is no TMDS clock or the
video resolution does not match programmed one. */
unsigned hdmi_free_run_mode:1;
/* SDP free run, CP-reg 0xDD */
unsigned sdp_free_run_auto:1;
unsigned sdp_free_run_man_col_en:1;
unsigned sdp_free_run_cbar_en:1;
unsigned sdp_free_run_force:1;
/* HPA manual (0) or auto (1), affects HDMI register 0x69 */
unsigned hpa_auto:1;
struct adv7842_sdp_csc_coeff sdp_csc_coeff;
struct adv7842_sdp_io_sync_adjustment sdp_io_sync_625;
struct adv7842_sdp_io_sync_adjustment sdp_io_sync_525;
/* i2c addresses */
u8 i2c_sdp_io;
u8 i2c_sdp;
u8 i2c_cp;
u8 i2c_vdp;
u8 i2c_afe;
u8 i2c_hdmi;
u8 i2c_repeater;
u8 i2c_edid;
u8 i2c_infoframe;
u8 i2c_cec;
u8 i2c_avlink;
};
#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE (V4L2_CID_DV_CLASS_BASE + 0x1000)
#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL (V4L2_CID_DV_CLASS_BASE + 0x1001)
#define V4L2_CID_ADV_RX_FREE_RUN_COLOR (V4L2_CID_DV_CLASS_BASE + 0x1002)
/* custom ioctl, used to test the external RAM that's used by the
* deinterlacer. */
#define ADV7842_CMD_RAM_TEST _IO('V', BASE_VIDIOC_PRIVATE)
#define ADV7842_EDID_PORT_A 0
#define ADV7842_EDID_PORT_B 1
#define ADV7842_EDID_PORT_VGA 2
#define ADV7842_PAD_SOURCE 3
#endif
/net-next.git/commit/drivers/usb/host/ohci-pxa27x.c?id=206c4720092d2a24bfefc041b377e889a220ffbf'>206c4720092d2a24bfefc041b377e889a220ffbf (diff)
Merge tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Three changes here: two run of the mill driver specific fixes and a
change from Mark Rutland which reverts some new device specific ACPI
binding code which was added during the merge window as there are
concerns about this sending the wrong signal about usage of regulators
in ACPI systems"
* tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: Revert support for ACPI interface
regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce
regulator: twl6030: fix range comparison, allowing vsel = 59