Age	Commit message (Collapse)	Author	Files	Lines
2017-02-03	bridge: uapi: add per vlan tunnel info	Roopa Prabhu	3	-0/+13
	New nested netlink attribute to associate tunnel info per vlan. This is used by bridge driver to send tunnel metadata to bridge ports in vlan tunnel mode. This patch also adds new per port flag IFLA_BRPORT_VLAN_TUNNEL to enable vlan tunnel mode. off by default. One example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). User can configure per-vlan tunnel information which the bridge driver can use to bridge vlan into the corresponding vn-segment. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03	vxlan: support fdb and learning in COLLECT_METADATA mode	Roopa Prabhu	1	-0/+1
	Vxlan COLLECT_METADATA mode today solves the per-vni netdev scalability problem in l3 networks. It expects all forwarding information to be present in dst_metadata. This patch series enhances collect metadata mode to include the case where only vni is present in dst_metadata, and the vxlan driver can then use the rest of the forwarding information datbase to make forwarding decisions. There is no change to default COLLECT_METADATA behaviour. These changes only apply to COLLECT_METADATA when used with the bridging use-case with a special dst_metadata tunnel info flag (eg: where vxlan device is part of a bridge). For all this to work, the vxlan driver will need to now support a single fdb table hashed by mac + vni. This series essentially makes this happen. use-case and workflow: vxlan collect metadata device participates in bridging vlan to vn-segments. Bridge driver above the vxlan device, sends the vni corresponding to the vlan in the dst_metadata. vxlan driver will lookup forwarding database with (mac + vni) for the required remote destination information to forward the packet. Changes introduced by this patch: - allow learning and forwarding database state in vxlan netdev in COLLECT_METADATA mode. Current behaviour is not changed by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used to support the new bridge friendly mode. - A single fdb table hashed by (mac, vni) to allow fdb entries with multiple vnis in the same fdb table - rx path already has the vni - tx path expects a vni in the packet with dst_metadata - prior to this series, fdb remote_dsts carried remote vni and the vxlan device carrying the fdb table represented the source vni. With the vxlan device now representing multiple vnis, this patch adds a src vni attribute to the fdb entry. The remote vni already uses NDA_VNI attribute. This patch introduces NDA_SRC_VNI netlink attribute to represent the src vni in a multi vni fdb table. iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's. before (netdev per vni): $bridge fdb show \| grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metadata in bridged mode (single netdev): $bridge fdb show \| grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03	ip_tunnels: new IP_TUNNEL_INFO_BRIDGE flag for ip_tunnel_info mode	Roopa Prabhu	1	-0/+1
	New ip_tunnel_info flag to represent bridged tunnel metadata. Used by bridge driver later in the series to pass per vlan dst metadata to bridge ports. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03	net/sched: act_ife: Change to use ife module	Yotam Gigi	2	-10/+1
	Use the encode/decode functionality from the ife module instead of using implementation inside the act_ife. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03	net: Introduce ife encapsulation module	Yotam Gigi	3	-0/+70
	This module is responsible for the ife encapsulation protocol encode/decode logics. That module can: - ife_encode: encode skb and reserve space for the ife meta header - ife_decode: decode skb and extract the meta header size - ife_tlv_meta_encode - encodes one tlv entry into the reserved ife header space. - ife_tlv_meta_decode - decodes one tlv entry from the packet - ife_tlv_meta_next - advance to the next tlv Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03	net/sched: act_ife: Unexport ife_tlv_meta_encode	Yotam Gigi	1	-2/+0
	As the function ife_tlv_meta_encode is not used by any other module, unexport it and make it static for the act_ife module. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03	tcp: add tcp_mss_clamp() helper	Eric Dumazet	1	-0/+9
	Small cleanup factorizing code doing the TCP_MAXSEG clamping. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02	net: add LINUX_MIB_PFMEMALLOCDROP counter	Eric Dumazet	1	-0/+1
	Debugging issues caused by pfmemalloc is often tedious. Add a new SNMP counter to more easily diagnose these problems. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Acked-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02	net: phy: marvell: Add support for 88e1545 PHY	Andrew Lunn	1	-0/+1
	The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on the zii-devel-b board. Add support for it to the Marvell PHY driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02	unix: add ioctl to open a unix socket file with O_PATH	Andrey Vagin	1	-0/+2
	This ioctl opens a file to which a socket is bound and returns a file descriptor. The caller has to have CAP_NET_ADMIN in the socket network namespace. Currently it is impossible to get a path and a mount point for a socket file. socket_diag reports address, device ID and inode number for unix sockets. An address can contain a relative path or a file may be moved somewhere. And these properties say nothing about a mount namespace and a mount point of a socket file. With the introduced ioctl, we can get a path by reading /proc/self/fd/X and get mnt_id from /proc/self/fdinfo/X. In CRIU we are going to use this ioctl to dump and restore unix socket. Here is an example how it can be used: $ strace -e socket,bind,ioctl ./test /tmp/test_sock socket(AF_UNIX, SOCK_STREAM, 0) = 3 bind(3, {sa_family=AF_UNIX, sun_path="test_sock"}, 11) = 0 ioctl(3, SIOCUNIXFILE, 0) = 4 ^Z $ ss -a \| grep test_sock u_str LISTEN 0 1 test_sock 17798 * 0 $ ls -l /proc/760/fd/{3,4} lrwx------ 1 root root 64 Feb 1 09:41 3 -> 'socket:[17798]' l--------- 1 root root 64 Feb 1 09:41 4 -> /tmp/test_sock $ cat /proc/760/fdinfo/4 pos: 0 flags: 012000000 mnt_id: 40 $ cat /proc/self/mountinfo \| grep "^40\s" 40 19 0:37 / /tmp rw shared:23 - tmpfs tmpfs rw Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02	net: phy: Marvell: Add mv88e6390 internal PHY	Andrew Lunn	1	-0/+6
	The mv88e6390 Ethernet switch has internal PHYs. These PHYs don't have an model ID in the ID2 register. So the MDIO driver in the switch intercepts reads to this register, and returns the switch family ID. Extend the Marvell PHY driver by including this ID, and treat the PHY as a 88E1540. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	David S. Miller	9	-30/+40
	All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	Linus Torvalds	4	-19/+26
	Pull networking fixes from David Miller: 1) Fix handling of interrupt status in stmmac driver. Just because we have masked the event from generating interrupts, doesn't mean the bit won't still be set in the interrupt status register. From Alexey Brodkin. 2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha. 3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich. 4) cls_flow does not match on icmpv6 codes properly, from Simon Horman. 5) Initial MAC address can be set incorrectly in some scenerios, from Ivan Vecera. 6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(), from Dan Carpenter. 7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet. 8) Fix crash in iwlwifi when unregistering thermal zone, from Jens Axboe. 9) Check for DMA mapping errors in starfire driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) tcp: fix 0 divide in __tcp_select_window() ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim() net: fix ndo_features_check/ndo_fix_features comment ordering net/sched: matchall: Fix configuration race be2net: fix initial MAC setting ipv6: fix flow labels when the traffic class is non-0 net: thunderx: avoid dereferencing xcv when NULL net/sched: cls_flower: Correct matching on ICMPv6 code ipv6: Paritially checksum full MTU frames net/mlx4_core: Avoid command timeouts during VF driver device shutdown gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page net: ethtool: add support for 2500BaseT and 5000BaseT link modes can: bcm: fix hrtimer/tasklet termination in bcm op removal net: adaptec: starfire: add checks for dma mapping errors net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause can: Fix kernel panic at security_sock_rcv_skb net: macb: Fix 64 bit addressing support for GEM stmmac: Discard masked flags in interrupt status register net/mlx5e: Check ets capability before ets query FW command net/mlx5e: Fix update of hash function/key via ethtool ...
2017-02-01	Merge branch 'for-linus' of ↵	Linus Torvalds	1	-0/+1
	git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fscache fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fscache: Fix dead object requeue fscache: Clear outstanding writes when disabling a cookie FS-Cache: Initialise stores_lock in netfs cookie
2017-02-01	Merge tag 'wireless-drivers-next-for-davem-2017-02-01' of ↵	David S. Miller	2	-1/+2
	git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 It's nice to see rt2x00 development has becoming active, for example adding support for a new chip version. Also wcn36xx has been converted to use the recently merged QCOM_SMD subsystem. Otherwise new features and fixes it lots of drivers. Major changes: iwlwifi * some more work in preparation for A000 family support * add support for radiotap timestamps * some work on our firmware debugging capabilities wcn36xx * convert to a proper QCOM_SMD driver (from the platform_driver interface) ath10k * VHT160 support * dump Copy Engine registers during firmware crash * search board file extension from SMBIOS wil6210 * add disable_ap_sme module parameter rt2x00 * support RT3352 with external PA * support for RT3352 with 20MHz crystal * add support for RT5350 WiSoC brcmfmac * add support for BCM43455 sdio device rtl8xxxu * add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01	net: fix ndo_features_check/ndo_fix_features comment ordering	Dimitris Michailidis	1	-14/+15
	Commit cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") inadvertently moved the doc comment for .ndo_fix_features instead of .ndo_features_check. Fix the comment ordering. Fixes: cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()") Signed-off-by: Dimitris Michailidis <dmichail@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>