#ifndef _SCSI_SCSI_DEVINFO_H #define _SCSI_SCSI_DEVINFO_H /* * Flags for SCSI devices that need special treatment */ #define BLIST_NOLUN 0x001 /* Only scan LUN 0 */ #define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning, deprecated: Use max_luns=N */ #define BLIST_BORKEN 0x004 /* Flag for broken handshaking */ #define BLIST_KEY 0x008 /* unlock by special command */ #define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */ #define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */ #define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */ #define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */ #define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */ #define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */ #define BLIST_INQUIRY_36 0x400 /* override additional length field */ #define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */ #define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */ #define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */ #define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */ #define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */ #define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */ #define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs (if HBA supports more than 8 LUNs) */ #define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */ #define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */ #define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ #define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ #define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ #define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */ #define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ #define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */ #define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */ #define BLIST_SCSI3LUN 0x8000000 /* Scan more than 256 LUNs for sequential scan */ #define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */ #define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */ #define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */ #define BLIST_SYNC_ALUA 0x80000000 /* Synchronous ALUA commands */ #endif n>
path: root/include/dt-bindings/power
diff options
context:
space:
mode:
authorDouglas Miller <dougmill@linux.vnet.ibm.com>2017-01-28 06:42:20 -0600
committerTejun Heo <tj@kernel.org>2017-01-28 07:49:42 -0500
commit966d2b04e070bc040319aaebfec09e0144dc3341 (patch)
tree4b96156e3d1dd4dfd6039b7c219c9dc4616da52d /include/dt-bindings/power
parent1b1bc42c1692e9b62756323c675a44cb1a1f9dbd (diff)
percpu-refcount: fix reference leak during percpu-atomic transition
percpu_ref_tryget() and percpu_ref_tryget_live() should return "true" IFF they acquire a reference. But the return value from atomic_long_inc_not_zero() is a long and may have high bits set, e.g. PERCPU_COUNT_BIAS, and the return value of the tryget routines is bool so the reference may actually be acquired but the routines return "false" which results in a reference leak since the caller assumes it does not need to do a corresponding percpu_ref_put(). This was seen when performing CPU hotplug during I/O, as hangs in blk_mq_freeze_queue_wait where percpu_ref_kill (blk_mq_freeze_queue_start) raced with percpu_ref_tryget (blk_mq_timeout_work). Sample stack trace: __switch_to+0x2c0/0x450 __schedule+0x2f8/0x970 schedule+0x48/0xc0 blk_mq_freeze_queue_wait+0x94/0x120 blk_mq_queue_reinit_work+0xb8/0x180 blk_mq_queue_reinit_prepare+0x84/0xa0 cpuhp_invoke_callback+0x17c/0x600 cpuhp_up_callbacks+0x58/0x150 _cpu_up+0xf0/0x1c0 do_cpu_up+0x120/0x150 cpu_subsys_online+0x64/0xe0 device_online+0xb4/0x120 online_store+0xb4/0xc0 dev_attr_store+0x68/0xa0 sysfs_kf_write+0x80/0xb0 kernfs_fop_write+0x17c/0x250 __vfs_write+0x6c/0x1e0 vfs_write+0xd0/0x270 SyS_write+0x6c/0x110 system_call+0x38/0xe0 Examination of the queue showed a single reference (no PERCPU_COUNT_BIAS, and __PERCPU_REF_DEAD, __PERCPU_REF_ATOMIC set) and no requests. However, conditions at the time of the race are count of PERCPU_COUNT_BIAS + 0 and __PERCPU_REF_DEAD and __PERCPU_REF_ATOMIC set. The fix is to make the tryget routines use an actual boolean internally instead of the atomic long result truncated to a int. Fixes: e625305b3907 percpu-refcount: make percpu_ref based on longs instead of ints Link: https://bugzilla.kernel.org/show_bug.cgi?id=190751 Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Reviewed-by: Jens Axboe <axboe@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e625305b3907 ("percpu-refcount: make percpu_ref based on longs instead of ints") Cc: stable@vger.kernel.org # v3.18+
Diffstat (limited to 'include/dt-bindings/power')