/* * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h * * Copyright (C) 2007 Andrew Victor * Copyright (C) 2007 Atmel Corporation. * * SDRAM Controllers (SDRAMC) - System peripherals registers. * Based on AT91SAM9261 datasheet revision D. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #ifndef AT91SAM9_SDRAMC_H #define AT91SAM9_SDRAMC_H /* SDRAM Controller (SDRAMC) registers */ #define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */ #define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ #define AT91_SDRAMC_MODE_NORMAL 0 #define AT91_SDRAMC_MODE_NOP 1 #define AT91_SDRAMC_MODE_PRECHARGE 2 #define AT91_SDRAMC_MODE_LMR 3 #define AT91_SDRAMC_MODE_REFRESH 4 #define AT91_SDRAMC_MODE_EXT_LMR 5 #define AT91_SDRAMC_MODE_DEEP 6 #define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */ #define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ #define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */ #define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ #define AT91_SDRAMC_NC_8 (0 << 0) #define AT91_SDRAMC_NC_9 (1 << 0) #define AT91_SDRAMC_NC_10 (2 << 0) #define AT91_SDRAMC_NC_11 (3 << 0) #define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ #define AT91_SDRAMC_NR_11 (0 << 2) #define AT91_SDRAMC_NR_12 (1 << 2) #define AT91_SDRAMC_NR_13 (2 << 2) #define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ #define AT91_SDRAMC_NB_2 (0 << 4) #define AT91_SDRAMC_NB_4 (1 << 4) #define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ #define AT91_SDRAMC_CAS_1 (1 << 5) #define AT91_SDRAMC_CAS_2 (2 << 5) #define AT91_SDRAMC_CAS_3 (3 << 5) #define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ #define AT91_SDRAMC_DBW_32 (0 << 7) #define AT91_SDRAMC_DBW_16 (1 << 7) #define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ #define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ #define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ #define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ #define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ #define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ #define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */ #define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_SDRAMC_LPCB_DISABLE 0 #define AT91_SDRAMC_LPCB_SELF_REFRESH 1 #define AT91_SDRAMC_LPCB_POWER_DOWN 2 #define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 #define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ #define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ #define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ #define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ #define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) #define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) #define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */ #define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */ #define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */ #define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */ #define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ #define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */ #define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ #define AT91_SDRAMC_MD_SDRAM 0 #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 #endif space:mode:
authorTony Lindgren <tony@atomide.com>2017-01-24 09:18:57 -0600
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-01-25 11:02:29 +0100
commit407788b51db6f6aab499d02420082f436abf3238 (patch)
treeb2fb3c885baf47cd2bd8ee0429f423b352e11905 /net/dns_resolver
parent7a308bb3016f57e5be11a677d15b821536419d36 (diff)
usb: musb: Fix host mode error -71 regression
Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") started implementing musb generic runtime PM support by introducing devctl register session bit based state control. This caused a regression where if a USB mass storage device is connected to a USB hub, we can get: usb 1-1: reset high-speed USB device number 2 using musb-hdrc usb 1-1: device descriptor read/64, error -71 usb 1-1.1: new high-speed USB device number 4 using musb-hdrc This is because before the USB storage device is connected, musb is in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume in musb_stage0_irq() and the related code calling finish_resume_work in musb_resume() and musb_runtime_resume() never gets called. To fix the issue, we can call schedule_delayed_work() directly in musb_stage0_irq() to have finish_resume_work run. And we should no longer never get interrupts when when suspended. We have changed musb to no longer need pm_runtime_irqsafe(). The need_finish_resume flag was added in commit 9298b4aad37e ("usb: musb: fix device hotplug behind hub") and no longer applies as far as I can tell. So let's just remove the earlier code that no longer is needed. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Reported-by: Bin Liu <b-liu@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'net/dns_resolver')