/*
* linux/sound/cs42l56.h -- Platform data for CS42L56
*
* Copyright (c) 2014 Cirrus Logic Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __CS42L56_H
#define __CS42L56_H
struct cs42l56_platform_data {
/* GPIO for Reset */
unsigned int gpio_nreset;
/* MICBIAS Level. Check datasheet Pg48 */
unsigned int micbias_lvl;
/* Analog Input 1A Reference 0=Single 1=Pseudo-Differential */
unsigned int ain1a_ref_cfg;
/* Analog Input 2A Reference 0=Single 1=Pseudo-Differential */
unsigned int ain2a_ref_cfg;
/* Analog Input 1B Reference 0=Single 1=Pseudo-Differential */
unsigned int ain1b_ref_cfg;
/* Analog Input 2B Reference 0=Single 1=Pseudo-Differential */
unsigned int ain2b_ref_cfg;
/* Charge Pump Freq. Check datasheet Pg62 */
unsigned int chgfreq;
/* HighPass Filter Right Channel Corner Frequency */
unsigned int hpfb_freq;
/* HighPass Filter Left Channel Corner Frequency */
unsigned int hpfa_freq;
/* Adaptive Power Control for LO/HP */
unsigned int adaptive_pwr;
};
#endif /* __CS42L56_H */
s-private-remove'>nds-private-remove
Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for
musb-core") started implementing musb generic runtime PM support by
introducing devctl register session bit based state control.
This caused a regression where if a USB mass storage device is connected
to a USB hub, we can get:
usb 1-1: reset high-speed USB device number 2 using musb-hdrc
usb 1-1: device descriptor read/64, error -71
usb 1-1.1: new high-speed USB device number 4 using musb-hdrc
This is because before the USB storage device is connected, musb is
in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume
in musb_stage0_irq() and the related code calling finish_resume_work
in musb_resume() and musb_runtime_resume() never gets called.
To fix the issue, we can call schedule_delayed_work() directly in
musb_stage0_irq() to have finish_resume_work run.
And we should no longer never get interrupts when when suspended.
We have changed musb to no longer need pm_runtime_irqsafe().
The need_finish_resume flag was added in commit 9298b4aad37e ("usb:
musb: fix device hotplug behind hub") and no longer applies as far
as I can tell. So let's just remove the earlier code that no longer
is needed.
Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
Reported-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'include/net/netns/conntrack.h')