/* * wm8962.h -- WM8962 Soc Audio driver platform data * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef _WM8962_PDATA_H #define _WM8962_PDATA_H #define WM8962_MAX_GPIO 6 /* Use to set GPIO default values to zero */ #define WM8962_GPIO_SET 0x10000 #define WM8962_GPIO_FN_CLKOUT 0 #define WM8962_GPIO_FN_LOGIC 1 #define WM8962_GPIO_FN_SDOUT 2 #define WM8962_GPIO_FN_IRQ 3 #define WM8962_GPIO_FN_THERMAL 4 #define WM8962_GPIO_FN_PLL2_LOCK 6 #define WM8962_GPIO_FN_PLL3_LOCK 7 #define WM8962_GPIO_FN_FLL_LOCK 9 #define WM8962_GPIO_FN_DRC_ACT 10 #define WM8962_GPIO_FN_WSEQ_DONE 11 #define WM8962_GPIO_FN_ALC_NG_ACT 12 #define WM8962_GPIO_FN_ALC_PEAK_LIMIT 13 #define WM8962_GPIO_FN_ALC_SATURATION 14 #define WM8962_GPIO_FN_ALC_LEVEL_THR 15 #define WM8962_GPIO_FN_ALC_LEVEL_LOCK 16 #define WM8962_GPIO_FN_FIFO_ERR 17 #define WM8962_GPIO_FN_OPCLK 18 #define WM8962_GPIO_FN_DMICCLK 19 #define WM8962_GPIO_FN_DMICDAT 20 #define WM8962_GPIO_FN_MICD 21 #define WM8962_GPIO_FN_MICSCD 22 struct wm8962_pdata { struct clk *mclk; int gpio_base; u32 gpio_init[WM8962_MAX_GPIO]; /* Setup for microphone detection, raw value to be written to * R48(0x30) - only microphone related bits will be updated. * Detection may be enabled here for use with signals brought * out on the GPIOs. */ u32 mic_cfg; bool irq_active_low; bool spk_mono; /* Speaker outputs tied together as mono */ /** * This flag should be set if one or both IN4 inputs is wired * in a DC measurement configuration. */ bool in4_dc_measure; }; #endif ef='/cgit.cgi/linux/net-next.git/tree/include/net/dsa.h?h=nds-private-remove&id=08d85f3ea99f1eeafc4e8507936190e86a16ee8c'>treecommitdiff
path: root/include/net/dsa.h
diff options
context:
space:
mode:
authorMarc Zyngier <marc.zyngier@arm.com>2017-01-17 16:00:48 +0000
committerThomas Gleixner <tglx@linutronix.de>2017-01-30 15:18:56 +0100
commit08d85f3ea99f1eeafc4e8507936190e86a16ee8c (patch)
tree410bb1acd0cd7dcfaad37ae7b63ff243b7fa4bee /include/net/dsa.h
parent566cf877a1fcb6d6dc0126b076aad062054c2637 (diff)
irqdomain: Avoid activating interrupts more than once
Since commit f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early"), we can end-up activating a PCI/MSI twice (once at allocation time, and once at startup time). This is normally of no consequences, except that there is some HW out there that may misbehave if activate is used more than once (the GICv3 ITS, for example, uses the activate callback to issue the MAPVI command, and the architecture spec says that "If there is an existing mapping for the EventID-DeviceID combination, behavior is UNPREDICTABLE"). While this could be worked around in each individual driver, it may make more sense to tackle the issue at the core level. In order to avoid getting in that situation, let's have a per-interrupt flag to remember if we have already activated that interrupt or not. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-and-tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484668848-24361-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'include/net/dsa.h')