/* * SHA1 routine optimized to do word accesses rather than byte accesses, * and to avoid unnecessary copies into the context array. * * This was based on the git SHA1 implementation. */ #include #include #include #include #include /* * If you have 32 registers or more, the compiler can (and should) * try to change the array[] accesses into registers. However, on * machines with less than ~25 registers, that won't really work, * and at least gcc will make an unholy mess of it. * * So to avoid that mess which just slows things down, we force * the stores to memory to actually happen (we might be better off * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as * suggested by Artur Skawina - that will also make gcc unable to * try to do the silly "optimize away loads" part because it won't * see what the value will be). * * Ben Herrenschmidt reports that on PPC, the C version comes close * to the optimized asm with this (ie on PPC you don't want that * 'volatile', since there are lots of registers). * * On ARM we get the best code generation by forcing a full memory barrier * between each SHA_ROUND, otherwise gcc happily get wild with spilling and * the stack frame size simply explode and performance goes down the drain. */ #ifdef CONFIG_X86 #define setW(x, val) (*(volatile __u32 *)&W(x) = (val)) #elif defined(CONFIG_ARM) #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0) #else #define setW(x, val) (W(x) = (val)) #endif /* This "rolls" over the 512-bit array */ #define W(x) (array[(x)&15]) /* * Where do we get the source from? The first 16 iterations get it from * the input data, the next mix it from the 512-bit array. */ #define SHA_SRC(t) get_unaligned_be32((__u32 *)data + t) #define SHA_MIX(t) rol32(W(t+13) ^ W(t+8) ^ W(t+2) ^ W(t), 1) #define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \ __u32 TEMP = input(t); setW(t, TEMP); \ E += TEMP + rol32(A,5) + (fn) + (constant); \ B = ror32(B, 2); } while (0) #define T_0_15(t, A, B, C, D, E) SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) #define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) #define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E ) #define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E ) #define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0xca62c1d6, A, B, C, D, E ) /** * sha_transform - single block SHA1 transform * * @digest: 160 bit digest to update * @data: 512 bits of data to hash * @array: 16 words of workspace (see note) * * This function generates a SHA1 digest for a single 512-bit block. * Be warned, it does not handle padding and message digest, do not * confuse it with the full FIPS 180-1 digest algorithm for variable * length messages. * * Note: If the hash is security sensitive, the caller should be sure * to clear the workspace. This is left to the caller to avoid * unnecessary clears between chained hashing operations. */ void sha_transform(__u32 *digest, const char *data, __u32 *array) { __u32 A, B, C, D, E; A = digest[0]; B = digest[1]; C = digest[2]; D = digest[3]; E = digest[4]; /* Round 1 - iterations 0-16 take their input from 'data' */ T_0_15( 0, A, B, C, D, E); T_0_15( 1, E, A, B, C, D); T_0_15( 2, D, E, A, B, C); T_0_15( 3, C, D, E, A, B); T_0_15( 4, B, C, D, E, A); T_0_15( 5, A, B, C, D, E); T_0_15( 6, E, A, B, C, D); T_0_15( 7, D, E, A, B, C); T_0_15( 8, C, D, E, A, B); T_0_15( 9, B, C, D, E, A); T_0_15(10, A, B, C, D, E); T_0_15(11, E, A, B, C, D); T_0_15(12, D, E, A, B, C); T_0_15(13, C, D, E, A, B); T_0_15(14, B, C, D, E, A); T_0_15(15, A, B, C, D, E); /* Round 1 - tail. Input from 512-bit mixing array */ T_16_19(16, E, A, B, C, D); T_16_19(17, D, E, A, B, C); T_16_19(18, C, D, E, A, B); T_16_19(19, B, C, D, E, A); /* Round 2 */ T_20_39(20, A, B, C, D, E); T_20_39(21, E, A, B, C, D); T_20_39(22, D, E, A, B, C); T_20_39(23, C, D, E, A, B); T_20_39(24, B, C, D, E, A); T_20_39(25, A, B, C, D, E); T_20_39(26, E, A, B, C, D); T_20_39(27, D, E, A, B, C); T_20_39(28, C, D, E, A, B); T_20_39(29, B, C, D, E, A); T_20_39(30, A, B, C, D, E); T_20_39(31, E, A, B, C, D); T_20_39(32, D, E, A, B, C); T_20_39(33, C, D, E, A, B); T_20_39(34, B, C, D, E, A); T_20_39(35, A, B, C, D, E); T_20_39(36, E, A, B, C, D); T_20_39(37, D, E, A, B, C); T_20_39(38, C, D, E, A, B); T_20_39(39, B, C, D, E, A); /* Round 3 */ T_40_59(40, A, B, C, D, E); T_40_59(41, E, A, B, C, D); T_40_59(42, D, E, A, B, C); T_40_59(43, C, D, E, A, B); T_40_59(44, B, C, D, E, A); T_40_59(45, A, B, C, D, E); T_40_59(46, E, A, B, C, D); T_40_59(47, D, E, A, B, C); T_40_59(48, C, D, E, A, B); T_40_59(49, B, C, D, E, A); T_40_59(50, A, B, C, D, E); T_40_59(51, E, A, B, C, D); T_40_59(52, D, E, A, B, C); T_40_59(53, C, D, E, A, B); T_40_59(54, B, C, D, E, A); T_40_59(55, A, B, C, D, E); T_40_59(56, E, A, B, C, D); T_40_59(57, D, E, A, B, C); T_40_59(58, C, D, E, A, B); T_40_59(59, B, C, D, E, A); /* Round 4 */ T_60_79(60, A, B, C, D, E); T_60_79(61, E, A, B, C, D); T_60_79(62, D, E, A, B, C); T_60_79(63, C, D, E, A, B); T_60_79(64, B, C, D, E, A); T_60_79(65, A, B, C, D, E); T_60_79(66, E, A, B, C, D); T_60_79(67, D, E, A, B, C); T_60_79(68, C, D, E, A, B); T_60_79(69, B, C, D, E, A); T_60_79(70, A, B, C, D, E); T_60_79(71, E, A, B, C, D); T_60_79(72, D, E, A, B, C); T_60_79(73, C, D, E, A, B); T_60_79(74, B, C, D, E, A); T_60_79(75, A, B, C, D, E); T_60_79(76, E, A, B, C, D); T_60_79(77, D, E, A, B, C); T_60_79(78, C, D, E, A, B); T_60_79(79, B, C, D, E, A); digest[0] += A; digest[1] += B; digest[2] += C; digest[3] += D; digest[4] += E; } EXPORT_SYMBOL(sha_transform); /** * sha_init - initialize the vectors for a SHA1 digest * @buf: vector to initialize */ void sha_init(__u32 *buf) { buf[0] = 0x67452301; buf[1] = 0xefcdab89; buf[2] = 0x98badcfe; buf[3] = 0x10325476; buf[4] = 0xc3d2e1f0; } EXPORT_SYMBOL(sha_init); 3d912679d8864421ec'>diff)
Merge branch 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull two parisc fixes from Helge Deller: "One fix to avoid usage of BITS_PER_LONG in user-space exported swab.h header which breaks compiling qemu, and one trivial fix for printk continuation in the parisc parport driver" * 'parisc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header parisc, parport_gsc: Fixes for printk continuation lines
Diffstat (limited to 'include/scsi/sas.h')