/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * FDDI-type device handling. * * Version: @(#)fddi.c 1.0.0 08/12/96 * * Authors: Lawrence V. Stefani, * * fddi.c is based on previous eth.c and tr.c work by * Ross Biro * Fred N. van Kempen, * Mark Evans, * Florian La Roche, * Alan Cox, * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * Changes * Alan Cox : New arp/rebuild header * Maciej W. Rozycki : IPv6 support */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Create the FDDI MAC header for an arbitrary protocol layer * * saddr=NULL means use device source address * daddr=NULL means leave destination address (eg unresolved arp) */ static int fddi_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, const void *daddr, const void *saddr, unsigned int len) { int hl = FDDI_K_SNAP_HLEN; struct fddihdr *fddi; if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP) hl=FDDI_K_8022_HLEN-3; fddi = (struct fddihdr *)skb_push(skb, hl); fddi->fc = FDDI_FC_K_ASYNC_LLC_DEF; if(type == ETH_P_IP || type == ETH_P_IPV6 || type == ETH_P_ARP) { fddi->hdr.llc_snap.dsap = FDDI_EXTENDED_SAP; fddi->hdr.llc_snap.ssap = FDDI_EXTENDED_SAP; fddi->hdr.llc_snap.ctrl = FDDI_UI_CMD; fddi->hdr.llc_snap.oui[0] = 0x00; fddi->hdr.llc_snap.oui[1] = 0x00; fddi->hdr.llc_snap.oui[2] = 0x00; fddi->hdr.llc_snap.ethertype = htons(type); } /* Set the source and destination hardware addresses */ if (saddr != NULL) memcpy(fddi->saddr, saddr, dev->addr_len); else memcpy(fddi->saddr, dev->dev_addr, dev->addr_len); if (daddr != NULL) { memcpy(fddi->daddr, daddr, dev->addr_len); return hl; } return -hl; } /* * Determine the packet's protocol ID and fill in skb fields. * This routine is called before an incoming packet is passed * up. It's used to fill in specific skb fields and to set * the proper pointer to the start of packet data (skb->data). */ __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev) { struct fddihdr *fddi = (struct fddihdr *)skb->data; __be16 type; /* * Set mac.raw field to point to FC byte, set data field to point * to start of packet data. Assume 802.2 SNAP frames for now. */ skb->dev = dev; skb_reset_mac_header(skb); /* point to frame control (FC) */ if(fddi->hdr.llc_8022_1.dsap==0xe0) { skb_pull(skb, FDDI_K_8022_HLEN-3); type = htons(ETH_P_802_2); } else { skb_pull(skb, FDDI_K_SNAP_HLEN); /* adjust for 21 byte header */ type=fddi->hdr.llc_snap.ethertype; } /* Set packet type based on destination address and flag settings */ if (*fddi->daddr & 0x01) { if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0) skb->pkt_type = PACKET_BROADCAST; else skb->pkt_type = PACKET_MULTICAST; } else if (dev->flags & IFF_PROMISC) { if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN)) skb->pkt_type = PACKET_OTHERHOST; } /* Assume 802.2 SNAP frames, for now */ return type; } EXPORT_SYMBOL(fddi_type_trans); static const struct header_ops fddi_header_ops = { .create = fddi_header, }; static void fddi_setup(struct net_device *dev) { dev->header_ops = &fddi_header_ops; dev->type = ARPHRD_FDDI; dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */ dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */ dev->min_mtu = FDDI_K_SNAP_HLEN; dev->max_mtu = FDDI_K_SNAP_DLEN; dev->addr_len = FDDI_K_ALEN; dev->tx_queue_len = 100; /* Long queues on FDDI */ dev->flags = IFF_BROADCAST | IFF_MULTICAST; memset(dev->broadcast, 0xFF, FDDI_K_ALEN); } /** * alloc_fddidev - Register FDDI device * @sizeof_priv: Size of additional driver-private structure to be allocated * for this FDDI device * * Fill in the fields of the device structure with FDDI-generic values. * * Constructs a new net device, complete with a private data area of * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for * this private data area. */ struct net_device *alloc_fddidev(int sizeof_priv) { return alloc_netdev(sizeof_priv, "fddi%d", NET_NAME_UNKNOWN, fddi_setup); } EXPORT_SYMBOL(alloc_fddidev); MODULE_LICENSE("GPL"); e0f054ca3204f259ba09c'>c26665ab5c49ad3e142e0f054ca3204f259ba09c (patch) tree3bab11918e18e9d25ef7544dba05cdf39d1abec5 /include/soc/arc/aux.h parent7a308bb3016f57e5be11a677d15b821536419d36 (diff)
x86/microcode/intel: Drop stashed AP patch pointer optimization
This was meant to save us the scanning of the microcode containter in the initrd since the first AP had already done that but it can also hurt us: Imagine a single hyperthreaded CPU (Intel(R) Atom(TM) CPU N270, for example) which updates the microcode on the BSP but since the microcode engine is shared between the two threads, the update on CPU1 doesn't happen because it has already happened on CPU0 and we don't find a newer microcode revision on CPU1. Which doesn't set the intel_ucode_patch pointer and at initrd jettisoning time we don't save the microcode patch for later application. Now, when we suspend to RAM, the loaded microcode gets cleared so we need to reload but there's no patch saved in the cache. Removing the optimization fixes this issue and all is fine and dandy. Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading") Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170120202955.4091-2-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'include/soc/arc/aux.h')