#ifdef CONFIG_BATMAN_ADV_DEBUG
int batadv_debug_log_setup(struct batadv_priv *bat_priv);
void batadv_debug_log_cleanup(struct batadv_priv *bat_priv);
#else
static inline int batadv_debug_log_setup(struct batadv_priv *bat_priv)
{
return 0;
}
static inline void batadv_debug_log_cleanup(struct batadv_priv *bat_priv)
{
}
#endif
/**
* enum batadv_dbg_level - available log levels
* @BATADV_DBG_BATMAN: OGM and TQ computations related messages
* @BATADV_DBG_ROUTES: route added / changed / deleted
* @BATADV_DBG_TT: translation table messages
* @BATADV_DBG_BLA: bridge loop avoidance messages
* @BATADV_DBG_DAT: ARP snooping and DAT related messages
* @BATADV_DBG_NC: network coding related messages
* @BATADV_DBG_MCAST: multicast related messages
* @BATADV_DBG_TP_METER: throughput meter messages
* @BATADV_DBG_ALL: the union of all the above log levels
*/
enum batadv_dbg_level {
BATADV_DBG_BATMAN = BIT(0),
BATADV_DBG_ROUTES = BIT(1),
BATADV_DBG_TT = BIT(2),
BATADV_DBG_BLA = BIT(3),
BATADV_DBG_DAT = BIT(4),
BATADV_DBG_NC = BIT(5),
BATADV_DBG_MCAST = BIT(6),
BATADV_DBG_TP_METER = BIT(7),
BATADV_DBG_ALL = 255,
};
#ifdef CONFIG_BATMAN_ADV_DEBUG
int batadv_debug_log(struct batadv_priv *bat_priv, const char *fmt, ...)
__printf(2, 3);
/* possibly ratelimited debug output */
#define _batadv_dbg(type, bat_priv, ratelimited, fmt, arg...) \
do { \
if (atomic_read(&(bat_priv)->log_level) & (type) && \
(!(ratelimited) || net_ratelimit())) \
batadv_debug_log(bat_priv, fmt, ## arg); \
} \
while (0)
#else /* !CONFIG_BATMAN_ADV_DEBUG */
__printf(4, 5)
static inline void _batadv_dbg(int type __always_unused,
struct batadv_priv *bat_priv __always_unused,
int ratelimited __always_unused,
const char *fmt __always_unused, ...)
{
}
#endif
#define batadv_dbg(type, bat_priv, arg...) \
_batadv_dbg(type, bat_priv, 0, ## arg)
#define batadv_dbg_ratelimited(type, bat_priv, arg...) \
_batadv_dbg(type, bat_priv, 1, ## arg)
#define batadv_info(net_dev, fmt, arg...) \
do { \
struct net_device *_netdev = (net_dev); \
struct batadv_priv *_batpriv = netdev_priv(_netdev); \
batadv_dbg(BATADV_DBG_ALL, _batpriv, fmt, ## arg); \
pr_info("%s: " fmt, _netdev->name, ## arg); \
} while (0)
#define batadv_err(net_dev, fmt, arg...) \
do { \
struct net_device *_netdev = (net_dev); \
struct batadv_priv *_batpriv = netdev_priv(_netdev); \
batadv_dbg(BATADV_DBG_ALL, _batpriv, fmt, ## arg); \
pr_err("%s: " fmt, _netdev->name, ## arg); \
} while (0)
#endif /* _NET_BATMAN_ADV_LOG_H_ */
/th>
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree, most relevantly they are:
1) Extend nft_exthdr to allow to match TCP options bitfields, from
Manuel Messner.
2) Allow to check if IPv6 extension header is present in nf_tables,
from Phil Sutter.
3) Allow to set and match conntrack zone in nf_tables, patches from
Florian Westphal.
4) Several patches for the nf_tables set infrastructure, this includes
cleanup and preparatory patches to add the new bitmap set type.
5) Add optional ruleset generation ID check to nf_tables and allow to
delete rules that got no public handle yet via NFTA_RULE_ID. These
patches add the missing kernel infrastructure to support rule
deletion by description from userspace.
6) Missing NFT_SET_OBJECT flag to select the right backend when sets
stores an object map.
7) A couple of cleanups for the expectation and SIP helper, from Gao
feng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This new attribute allows us to uniquely identify a rule in transaction.
Robots may trigger an insertion followed by deletion in a batch, in that
scenario we still don't have a public rule handle that we can use to
delete the rule. This is similar to the NFTA_SET_ID attribute that
allows us to refer to an anonymous set from a batch.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allows userspace to specify the generation ID that has been
used to build an incremental batch update.
If userspace specifies the generation ID in the batch message as
attribute, then nfnetlink compares it to the current generation ID so
you make sure that you work against the right baseline. Otherwise, bail
out with ERESTART so userspace knows that its changeset is stale and
needs to respin. Userspace can do this transparently at the cost of
taking slightly more time to refresh caches and rework the changeset.
This check is optional, if there is no NFNL_BATCH_GENID attribute in the
batch begin message, then no check is performed.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After the dst->pending_confirm flag was removed, we do not
need anymore to provide dst arg to dst_neigh_output.
So, rename it to neigh_output as before commit 5110effee8fd
("net: Do delayed neigh confirmation.").
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes tap a separate module for other types of virtual interfaces, for example,
ipvlan to use.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extending tap APIs get/free_minor and create/destroy_cdev to handle more than one
type of virtual interface.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macvlan object is re-structured to hold tap related elements in a separate
entity, tap_dev. Upon NETDEV_REGISTER device_event, tap_dev is registered with
idr and fetched again on tap_open. Few of the tap functions are modified to
accepted tap_dev as argument. tap_dev object includes callbacks to be used by
underlying virtual interface to take care of tx and rx accounting.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch provides tap device create/destroy APIs in tap.c.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Renaming tap related APIs, data structures and macros in tap.c from macvtap_.* to tap_.*
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macvtap module has code for tap/queue management and link management. This patch splits
the code into macvtap_main.c for link management and tap.c for tap/queue management.
Functionality in tap.c can be re-used for implementing tap on other virtual interfaces.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|