# # 802.1d Ethernet Bridging # config BRIDGE tristate "802.1d Ethernet Bridging" select LLC select STP depends on IPV6 || IPV6=n ---help--- If you say Y here, then your Linux box will be able to act as an Ethernet bridge, which means that the different Ethernet segments it is connected to will appear as one Ethernet to the participants. Several such bridges can work together to create even larger networks of Ethernets using the IEEE 802.1 spanning tree algorithm. As this is a standard, Linux bridges will cooperate properly with other third party bridge products. In order to use the Ethernet bridge, you'll need the bridge configuration tools; see for location. Please read the Bridge mini-HOWTO for more information. If you enable iptables support along with the bridge support then you turn your bridge into a bridging IP firewall. iptables will then see the IP packets being bridged, so you need to take this into account when setting up your firewall rules. Enabling arptables support when bridging will let arptables see bridged ARP traffic in the arptables FORWARD chain. To compile this code as a module, choose M here: the module will be called bridge. If unsure, say N. config BRIDGE_IGMP_SNOOPING bool "IGMP/MLD snooping" depends on BRIDGE depends on INET default y ---help--- If you say Y here, then the Ethernet bridge will be able selectively forward multicast traffic based on IGMP/MLD traffic received from each port. Say N to exclude this support and reduce the binary size. If unsure, say Y. config BRIDGE_VLAN_FILTERING bool "VLAN filtering" depends on BRIDGE depends on VLAN_8021Q default n ---help--- If you say Y here, then the Ethernet bridge will be able selectively receive and forward traffic based on VLAN information in the packet any VLAN information configured on the bridge port or bridge device. Say N to exclude this support and reduce the binary size. If unsure, say Y. 6ee8c'>treecommitdiff
path: root/include/dt-bindings/phy/phy-pistachio-usb.h
diff options
context:
space:
mode:
authorMarc Zyngier <marc.zyngier@arm.com>2017-01-17 16:00:48 +0000
committerThomas Gleixner <tglx@linutronix.de>2017-01-30 15:18:56 +0100
commit08d85f3ea99f1eeafc4e8507936190e86a16ee8c (patch)
tree410bb1acd0cd7dcfaad37ae7b63ff243b7fa4bee /include/dt-bindings/phy/phy-pistachio-usb.h
parent566cf877a1fcb6d6dc0126b076aad062054c2637 (diff)
irqdomain: Avoid activating interrupts more than once
Since commit f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early"), we can end-up activating a PCI/MSI twice (once at allocation time, and once at startup time). This is normally of no consequences, except that there is some HW out there that may misbehave if activate is used more than once (the GICv3 ITS, for example, uses the activate callback to issue the MAPVI command, and the architecture spec says that "If there is an existing mapping for the EventID-DeviceID combination, behavior is UNPREDICTABLE"). While this could be worked around in each individual driver, it may make more sense to tackle the issue at the core level. In order to avoid getting in that situation, let's have a per-interrupt flag to remember if we have already activated that interrupt or not. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-and-tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484668848-24361-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'include/dt-bindings/phy/phy-pistachio-usb.h')