/* * IPv6 library code, needed by static components when full IPv6 support is * not configured or static. */ #include #include #include #include /* if ipv6 module registers this function is used by xfrm to force all * sockets to relookup their nodes - this is fairly expensive, be * careful */ void (*__fib6_flush_trees)(struct net *); EXPORT_SYMBOL(__fib6_flush_trees); #define IPV6_ADDR_SCOPE_TYPE(scope) ((scope) << 16) static inline unsigned int ipv6_addr_scope2type(unsigned int scope) { switch (scope) { case IPV6_ADDR_SCOPE_NODELOCAL: return (IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_NODELOCAL) | IPV6_ADDR_LOOPBACK); case IPV6_ADDR_SCOPE_LINKLOCAL: return (IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_LINKLOCAL) | IPV6_ADDR_LINKLOCAL); case IPV6_ADDR_SCOPE_SITELOCAL: return (IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_SITELOCAL) | IPV6_ADDR_SITELOCAL); } return IPV6_ADDR_SCOPE_TYPE(scope); } int __ipv6_addr_type(const struct in6_addr *addr) { __be32 st; st = addr->s6_addr32[0]; /* Consider all addresses with the first three bits different of 000 and 111 as unicasts. */ if ((st & htonl(0xE0000000)) != htonl(0x00000000) && (st & htonl(0xE0000000)) != htonl(0xE0000000)) return (IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_GLOBAL)); if ((st & htonl(0xFF000000)) == htonl(0xFF000000)) { /* multicast */ /* addr-select 3.1 */ return (IPV6_ADDR_MULTICAST | ipv6_addr_scope2type(IPV6_ADDR_MC_SCOPE(addr))); } if ((st & htonl(0xFFC00000)) == htonl(0xFE800000)) return (IPV6_ADDR_LINKLOCAL | IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_LINKLOCAL)); /* addr-select 3.1 */ if ((st & htonl(0xFFC00000)) == htonl(0xFEC00000)) return (IPV6_ADDR_SITELOCAL | IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_SITELOCAL)); /* addr-select 3.1 */ if ((st & htonl(0xFE000000)) == htonl(0xFC000000)) return (IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_GLOBAL)); /* RFC 4193 */ if ((addr->s6_addr32[0] | addr->s6_addr32[1]) == 0) { if (addr->s6_addr32[2] == 0) { if (addr->s6_addr32[3] == 0) return IPV6_ADDR_ANY; if (addr->s6_addr32[3] == htonl(0x00000001)) return (IPV6_ADDR_LOOPBACK | IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_LINKLOCAL)); /* addr-select 3.4 */ return (IPV6_ADDR_COMPATv4 | IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_GLOBAL)); /* addr-select 3.3 */ } if (addr->s6_addr32[2] == htonl(0x0000ffff)) return (IPV6_ADDR_MAPPED | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_GLOBAL)); /* addr-select 3.3 */ } return (IPV6_ADDR_UNICAST | IPV6_ADDR_SCOPE_TYPE(IPV6_ADDR_SCOPE_GLOBAL)); /* addr-select 3.4 */ } EXPORT_SYMBOL(__ipv6_addr_type); static ATOMIC_NOTIFIER_HEAD(inet6addr_chain); int register_inet6addr_notifier(struct notifier_block *nb) { return atomic_notifier_chain_register(&inet6addr_chain, nb); } EXPORT_SYMBOL(register_inet6addr_notifier); int unregister_inet6addr_notifier(struct notifier_block *nb) { return atomic_notifier_chain_unregister(&inet6addr_chain, nb); } EXPORT_SYMBOL(unregister_inet6addr_notifier); int inet6addr_notifier_call_chain(unsigned long val, void *v) { return atomic_notifier_call_chain(&inet6addr_chain, val, v); } EXPORT_SYMBOL(inet6addr_notifier_call_chain); static int eafnosupport_ipv6_dst_lookup(struct net *net, struct sock *u1, struct dst_entry **u2, struct flowi6 *u3) { return -EAFNOSUPPORT; } const struct ipv6_stub *ipv6_stub __read_mostly = &(struct ipv6_stub) { .ipv6_dst_lookup = eafnosupport_ipv6_dst_lookup, }; EXPORT_SYMBOL_GPL(ipv6_stub); /* IPv6 Wildcard Address and Loopback Address defined by RFC2553 */ const struct in6_addr in6addr_loopback = IN6ADDR_LOOPBACK_INIT; EXPORT_SYMBOL(in6addr_loopback); const struct in6_addr in6addr_any = IN6ADDR_ANY_INIT; EXPORT_SYMBOL(in6addr_any); const struct in6_addr in6addr_linklocal_allnodes = IN6ADDR_LINKLOCAL_ALLNODES_INIT; EXPORT_SYMBOL(in6addr_linklocal_allnodes); const struct in6_addr in6addr_linklocal_allrouters = IN6ADDR_LINKLOCAL_ALLROUTERS_INIT; EXPORT_SYMBOL(in6addr_linklocal_allrouters); const struct in6_addr in6addr_interfacelocal_allnodes = IN6ADDR_INTERFACELOCAL_ALLNODES_INIT; EXPORT_SYMBOL(in6addr_interfacelocal_allnodes); const struct in6_addr in6addr_interfacelocal_allrouters = IN6ADDR_INTERFACELOCAL_ALLROUTERS_INIT; EXPORT_SYMBOL(in6addr_interfacelocal_allrouters); const struct in6_addr in6addr_sitelocal_allrouters = IN6ADDR_SITELOCAL_ALLROUTERS_INIT; EXPORT_SYMBOL(in6addr_sitelocal_allrouters); static void snmp6_free_dev(struct inet6_dev *idev) { kfree(idev->stats.icmpv6msgdev); kfree(idev->stats.icmpv6dev); free_percpu(idev->stats.ipv6); } static void in6_dev_finish_destroy_rcu(struct rcu_head *head) { struct inet6_dev *idev = container_of(head, struct inet6_dev, rcu); snmp6_free_dev(idev); kfree(idev); } /* Nobody refers to this device, we may destroy it. */ void in6_dev_finish_destroy(struct inet6_dev *idev) { struct net_device *dev = idev->dev; WARN_ON(!list_empty(&idev->addr_list)); WARN_ON(idev->mc_list); WARN_ON(timer_pending(&idev->rs_timer)); #ifdef NET_REFCNT_DEBUG pr_debug("%s: %s\n", __func__, dev ? dev->name : "NIL"); #endif dev_put(dev); if (!idev->dead) { pr_warn("Freeing alive inet6 device %p\n", idev); return; } call_rcu(&idev->rcu, in6_dev_finish_destroy_rcu); } EXPORT_SYMBOL(in6_dev_finish_destroy); linux/net-next.git/commit/sound/soc/codecs/max9860.c?h=nds-private-remove&id=6e978b22efa1db9f6e71b24440b5f1d93e968ee3'>6e978b22efa1db9f6e71b24440b5f1d93e968ee3 (patch) treec666f7a26b860674848949e39a610222b0723f89 /sound/soc/codecs/max9860.c parent3c223c19aea85d3dda1416c187915f4a30b04b1f (diff)
cpufreq: intel_pstate: Disable energy efficiency optimization
Some Kabylake desktop processors may not reach max turbo when running in HWP mode, even if running under sustained 100% utilization. This occurs when the HWP.EPP (Energy Performance Preference) is set to "balance_power" (0x80) -- the default on most systems. It occurs because the platform BIOS may erroneously enable an energy-efficiency setting -- MSR_IA32_POWER_CTL BIT-EE, which is not recommended to be enabled on this SKU. On the failing systems, this BIOS issue was not discovered when the desktop motherboard was tested with Windows, because the BIOS also neglects to provide the ACPI/CPPC table, that Windows requires to enable HWP, and so Windows runs in legacy P-state mode, where this setting has no effect. Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and so it runs in HWP mode, exposing this incorrect BIOS configuration. There are several ways to address this problem. First, Linux can also run in legacy P-state mode on this system. As intel_pstate is how Linux enables HWP, booting with "intel_pstate=disable" will run in acpi-cpufreq/ondemand legacy p-state mode. Or second, the "performance" governor can be used with intel_pstate, which will modify HWP.EPP to 0. Or third, starting in 4.10, the /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference attribute in can be updated from "balance_power" to "performance". Or fourth, apply this patch, which fixes the erroneous setting of MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default configuration to function as designed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Cc: 4.6+ <stable@vger.kernel.org> # 4.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'sound/soc/codecs/max9860.c')