/* * digi00x-transaction.c - a part of driver for Digidesign Digi 002/003 family * * Copyright (c) 2014-2015 Takashi Sakamoto * * Licensed under the terms of the GNU General Public License, version 2. */ #include #include "digi00x.h" static int fill_midi_message(struct snd_rawmidi_substream *substream, u8 *buf) { int bytes; buf[0] = 0x80; bytes = snd_rawmidi_transmit_peek(substream, buf + 1, 2); if (bytes >= 0) buf[3] = 0xc0 | bytes; return bytes; } static void handle_midi_control(struct snd_dg00x *dg00x, __be32 *buf, unsigned int length) { struct snd_rawmidi_substream *substream; unsigned int i; unsigned int len; u8 *b; substream = ACCESS_ONCE(dg00x->in_control); if (substream == NULL) return; length /= 4; for (i = 0; i < length; i++) { b = (u8 *)&buf[i]; len = b[3] & 0xf; if (len > 0) snd_rawmidi_receive(dg00x->in_control, b + 1, len); } } static void handle_unknown_message(struct snd_dg00x *dg00x, unsigned long long offset, __be32 *buf) { unsigned long flags; spin_lock_irqsave(&dg00x->lock, flags); dg00x->msg = be32_to_cpu(*buf); spin_unlock_irqrestore(&dg00x->lock, flags); wake_up(&dg00x->hwdep_wait); } static void handle_message(struct fw_card *card, struct fw_request *request, int tcode, int destination, int source, int generation, unsigned long long offset, void *data, size_t length, void *callback_data) { struct snd_dg00x *dg00x = callback_data; __be32 *buf = (__be32 *)data; if (offset == dg00x->async_handler.offset) handle_unknown_message(dg00x, offset, buf); else if (offset == dg00x->async_handler.offset + 4) handle_midi_control(dg00x, buf, length); fw_send_response(card, request, RCODE_COMPLETE); } int snd_dg00x_transaction_reregister(struct snd_dg00x *dg00x) { struct fw_device *device = fw_parent_device(dg00x->unit); __be32 data[2]; int err; /* Unknown. 4bytes. */ data[0] = cpu_to_be32((device->card->node_id << 16) | (dg00x->async_handler.offset >> 32)); data[1] = cpu_to_be32(dg00x->async_handler.offset); err = snd_fw_transaction(dg00x->unit, TCODE_WRITE_BLOCK_REQUEST, DG00X_ADDR_BASE + DG00X_OFFSET_MESSAGE_ADDR, &data, sizeof(data), 0); if (err < 0) return err; /* Asynchronous transactions for MIDI control message. */ data[0] = cpu_to_be32((device->card->node_id << 16) | (dg00x->async_handler.offset >> 32)); data[1] = cpu_to_be32(dg00x->async_handler.offset + 4); return snd_fw_transaction(dg00x->unit, TCODE_WRITE_BLOCK_REQUEST, DG00X_ADDR_BASE + DG00X_OFFSET_MIDI_CTL_ADDR, &data, sizeof(data), 0); } int snd_dg00x_transaction_register(struct snd_dg00x *dg00x) { static const struct fw_address_region resp_register_region = { .start = 0xffffe0000000ull, .end = 0xffffe000ffffull, }; int err; dg00x->async_handler.length = 12; dg00x->async_handler.address_callback = handle_message; dg00x->async_handler.callback_data = dg00x; err = fw_core_add_address_handler(&dg00x->async_handler, &resp_register_region); if (err < 0) return err; err = snd_dg00x_transaction_reregister(dg00x); if (err < 0) goto error; err = snd_fw_async_midi_port_init(&dg00x->out_control, dg00x->unit, DG00X_ADDR_BASE + DG00X_OFFSET_MMC, 4, fill_midi_message); if (err < 0) goto error; return err; error: fw_core_remove_address_handler(&dg00x->async_handler); dg00x->async_handler.callback_data = NULL; return err; } void snd_dg00x_transaction_unregister(struct snd_dg00x *dg00x) { if (dg00x->async_handler.callback_data == NULL) return; snd_fw_async_midi_port_destroy(&dg00x->out_control); fw_core_remove_address_handler(&dg00x->async_handler); dg00x->async_handler.callback_data = NULL; } class='left'>FilesLines alue='6'>6space:mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-10-15 09:26:12 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-10-15 09:26:12 -0700
commit133d970e0dadf7b413db19893acc5b26664bf4a1 (patch)
treeea10732ca1d0f663ef1319973947a7c72cf170e7 /drivers/usb/serial/garmin_gps.c
parent050aaeab99067b6a08b34274ff15ca5dbb94a160 (diff)
parent38b8767462120c62a5046b529c80b06861f9ac85 (diff)
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
Diffstat (limited to 'drivers/usb/serial/garmin_gps.c')