/* * Copyright (c) 1998-2002 by Paul Davis * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include /* Control bits for the Load Control Register */ #define FX_LSB_TRANSFER 0x01 /* transfer after DSP LSB byte written */ #define FX_MSB_TRANSFER 0x02 /* transfer after DSP MSB byte written */ #define FX_AUTO_INCR 0x04 /* auto-increment DSP address after transfer */ #define WAIT_IDLE 0xff static int wavefront_fx_idle (snd_wavefront_t *dev) { int i; unsigned int x = 0x80; for (i = 0; i < 1000; i++) { x = inb (dev->fx_status); if ((x & 0x80) == 0) { break; } } if (x & 0x80) { snd_printk ("FX device never idle.\n"); return 0; } return (1); } static void wavefront_fx_mute (snd_wavefront_t *dev, int onoff) { if (!wavefront_fx_idle(dev)) { return; } outb (onoff ? 0x02 : 0x00, dev->fx_op); } static int wavefront_fx_memset (snd_wavefront_t *dev, int page, int addr, int cnt, unsigned short *data) { if (page < 0 || page > 7) { snd_printk ("FX memset: " "page must be >= 0 and <= 7\n"); return -EINVAL; } if (addr < 0 || addr > 0x7f) { snd_printk ("FX memset: " "addr must be >= 0 and <= 7f\n"); return -EINVAL; } if (cnt == 1) { outb (FX_LSB_TRANSFER, dev->fx_lcr); outb (page, dev->fx_dsp_page); outb (addr, dev->fx_dsp_addr); outb ((data[0] >> 8), dev->fx_dsp_msb); outb ((data[0] & 0xff), dev->fx_dsp_lsb); snd_printk ("FX: addr %d:%x set to 0x%x\n", page, addr, data[0]); } else { int i; outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev->fx_lcr); outb (page, dev->fx_dsp_page); outb (addr, dev->fx_dsp_addr); for (i = 0; i < cnt; i++) { outb ((data[i] >> 8), dev->fx_dsp_msb); outb ((data[i] & 0xff), dev->fx_dsp_lsb); if (!wavefront_fx_idle (dev)) { break; } } if (i != cnt) { snd_printk ("FX memset " "(0x%x, 0x%x, 0x%lx, %d) incomplete\n", page, addr, (unsigned long) data, cnt); return -EIO; } } return 0; } int snd_wavefront_fx_detect (snd_wavefront_t *dev) { /* This is a crude check, but its the best one I have for now. Certainly on the Maui and the Tropez, wavefront_fx_idle() will report "never idle", which suggests that this test should work OK. */ if (inb (dev->fx_status) & 0x80) { snd_printk ("Hmm, probably a Maui or Tropez.\n"); return -1; } return 0; } int snd_wavefront_fx_open (struct snd_hwdep *hw, struct file *file) { if (!try_module_get(hw->card->module)) return -EFAULT; file->private_data = hw; return 0; } int snd_wavefront_fx_release (struct snd_hwdep *hw, struct file *file) { module_put(hw->card->module); return 0; } int snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file, unsigned int cmd, unsigned long arg) { struct snd_card *card; snd_wavefront_card_t *acard; snd_wavefront_t *dev; wavefront_fx_info r; unsigned short *page_data = NULL; unsigned short *pd; int err = 0; card = sdev->card; if (snd_BUG_ON(!card)) return -ENODEV; if (snd_BUG_ON(!card->private_data)) return -ENODEV; acard = card->private_data; dev = &acard->wavefront; if (copy_from_user (&r, (void __user *)arg, sizeof (wavefront_fx_info))) return -EFAULT; switch (r.request) { case WFFX_MUTE: wavefront_fx_mute (dev, r.data[0]); return -EIO; case WFFX_MEMSET: if (r.data[2] <= 0) { snd_printk ("cannot write " "<= 0 bytes to FX\n"); return -EIO; } else if (r.data[2] == 1) { pd = (unsigned short *) &r.data[3]; } else { if (r.data[2] > 256) { snd_printk ("cannot write " "> 512 bytes to FX\n"); return -EIO; } page_data = memdup_user((unsigned char __user *) r.data[3], r.data[2] * sizeof(short)); if (IS_ERR(page_data)) return PTR_ERR(page_data); pd = page_data; } err = wavefront_fx_memset (dev, r.data[0], /* page */ r.data[1], /* addr */ r.data[2], /* cnt */ pd); kfree(page_data); break; default: snd_printk ("FX: ioctl %d not yet supported\n", r.request); return -ENOTTY; } return err; } /* YSS225 initialization. This code was developed using DOSEMU. The Turtle Beach SETUPSND utility was run with I/O tracing in DOSEMU enabled, and a reconstruction of the port I/O done, using the Yamaha faxback document as a guide to add more logic to the code. Its really pretty weird. This is the approach of just dumping the whole I/O sequence as a series of port/value pairs and a simple loop that outputs it. */ int snd_wavefront_fx_start (snd_wavefront_t *dev) { unsigned int i; int err; const struct firmware *firmware = NULL; if (dev->fx_initialized) return 0; err = request_firmware(&firmware, "yamaha/yss225_registers.bin", dev->card->dev); if (err < 0) { err = -1; goto out; } for (i = 0; i + 1 < firmware->size; i += 2) { if (firmware->data[i] >= 8 && firmware->data[i] < 16) { outb(firmware->data[i + 1], dev->base + firmware->data[i]); } else if (firmware->data[i] == WAIT_IDLE) { if (!wavefront_fx_idle(dev)) { err = -1; goto out; } } else { snd_printk(KERN_ERR "invalid address" " in register data\n"); err = -1; goto out; } } dev->fx_initialized = 1; err = 0; out: release_firmware(firmware); return err; } MODULE_FIRMWARE("yamaha/yss225_registers.bin"); 250&id2=ff4cf0e5ce952488074aa7f47734af1794f55fbc'>diff)
net: phy: Add LED mode driver for Microsemi PHYs.
LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/rxrpc/peer_object.c')