/* * Initialisation code for Cyrix/NatSemi VSA1 softaudio * * (C) Copyright 2003 Red Hat Inc * * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems. * The older version (VSA1) provides fairly good soundblaster emulation * although there are a couple of bugs: large DMA buffers break record, * and the MPU event handling seems suspect. VSA2 allows the native driver * to control the AC97 audio engine directly and requires a different driver. * * Thanks to National Semiconductor for providing the needed information * on the XpressAudio(tm) internals. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * TO DO: * Investigate whether we can portably support Cognac (5520) in the * same manner. */ #include #include #include #include #include #include "sound_config.h" #include "sb.h" /* * Read a soundblaster compatible mixer register. * In this case we are actually reading an SMI trap * not real hardware. */ static u8 mixer_read(unsigned long io, u8 reg) { outb(reg, io + 4); udelay(20); reg = inb(io + 5); udelay(20); return reg; } static int probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) { struct address_info *hw_config; unsigned long base; void __iomem *mem; unsigned long io; u16 map; u8 irq, dma8, dma16; int oldquiet; extern int sb_be_quiet; base = pci_resource_start(pdev, 0); if(base == 0UL) return 1; mem = ioremap(base, 128); if (!mem) return 1; map = readw(mem + 0x18); /* Read the SMI enables */ iounmap(mem); /* Map bits 0:1 * 0x20 + 0x200 = sb base 2 sb enable 3 adlib enable 5 MPU enable 0x330 6 MPU enable 0x300 The other bits may be used internally so must be masked */ io = 0x220 + 0x20 * (map & 3); if(map & (1<<2)) printk(KERN_INFO "kahlua: XpressAudio at 0x%lx\n", io); else return 1; if(map & (1<<5)) printk(KERN_INFO "kahlua: MPU at 0x300\n"); else if(map & (1<<6)) printk(KERN_INFO "kahlua: MPU at 0x330\n"); irq = mixer_read(io, 0x80) & 0x0F; dma8 = mixer_read(io, 0x81); // printk("IRQ=%x MAP=%x DMA=%x\n", irq, map, dma8); if(dma8 & 0x20) dma16 = 5; else if(dma8 & 0x40) dma16 = 6; else if(dma8 & 0x80) dma16 = 7; else { printk(KERN_ERR "kahlua: No 16bit DMA enabled.\n"); return 1; } if(dma8 & 0x01) dma8 = 0; else if(dma8 & 0x02) dma8 = 1; else if(dma8 & 0x08) dma8 = 3; else { printk(KERN_ERR "kahlua: No 8bit DMA enabled.\n"); return 1; } if(irq & 1) irq = 9; else if(irq & 2) irq = 5; else if(irq & 4) irq = 7; else if(irq & 8) irq = 10; else { printk(KERN_ERR "kahlua: SB IRQ not set.\n"); return 1; } printk(KERN_INFO "kahlua: XpressAudio on IRQ %d, DMA %d, %d\n", irq, dma8, dma16); hw_config = kzalloc(sizeof(struct address_info), GFP_KERNEL); if(hw_config == NULL) { printk(KERN_ERR "kahlua: out of memory.\n"); return 1; } pci_set_drvdata(pdev, hw_config); hw_config->io_base = io; hw_config->irq = irq; hw_config->dma = dma8; hw_config->dma2 = dma16; hw_config->name = "Cyrix XpressAudio"; hw_config->driver_use_1 = SB_NO_MIDI | SB_PCI_IRQ; if (!request_region(io, 16, "soundblaster")) goto err_out_free; if(sb_dsp_detect(hw_config, 0, 0, NULL)==0) { printk(KERN_ERR "kahlua: audio not responding.\n"); release_region(io, 16); goto err_out_free; } oldquiet = sb_be_quiet; sb_be_quiet = 1; if(sb_dsp_init(hw_config, THIS_MODULE)) { sb_be_quiet = oldquiet; goto err_out_free; } sb_be_quiet = oldquiet; return 0; err_out_free: kfree(hw_config); return 1; } static void remove_one(struct pci_dev *pdev) { struct address_info *hw_config = pci_get_drvdata(pdev); sb_dsp_unload(hw_config, 0); kfree(hw_config); } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("Kahlua VSA1 PCI Audio"); MODULE_LICENSE("GPL"); /* * 5530 only. The 5510/5520 decode is different. */ static const struct pci_device_id id_tbl[] = { { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 }, { } }; MODULE_DEVICE_TABLE(pci, id_tbl); static struct pci_driver kahlua_driver = { .name = "kahlua", .id_table = id_tbl, .probe = probe_one, .remove = remove_one, }; static int __init kahlua_init_module(void) { printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n"); return pci_register_driver(&kahlua_driver); } static void kahlua_cleanup_module(void) { pci_unregister_driver(&kahlua_driver); } module_init(kahlua_init_module); module_exit(kahlua_cleanup_module); util/alias.c?h=nds-private-remove&id=10468c3b438c36a40e237bab86d15d2b87716046'>logplain -rw-r--r--annotate.c44411logplain -rw-r--r--annotate.h5583logplain -rw-r--r--auxtrace.c47774logplain -rw-r--r--auxtrace.h22142logplain -rw-r--r--block-range.c6948logplain -rw-r--r--block-range.h1607logplain -rw-r--r--bpf-loader.c40787logplain -rw-r--r--bpf-loader.h6215logplain -rw-r--r--bpf-prologue.c11226logplain -rw-r--r--bpf-prologue.h847logplain -rw-r--r--build-id.c19054logplain -rw-r--r--build-id.h1859logplain d---------c++184logplain -rw-r--r--cache.h733logplain -rw-r--r--call-path.c2893logplain -rw-r--r--call-path.h2203logplain -rw-r--r--callchain.c29332logplain -rw-r--r--callchain.h7881logplain -rw-r--r--cgroup.c3195logplain -rw-r--r--cgroup.h359logplain -rw-r--r--cloexec.c1950logplain -rw-r--r--cloexec.h251logplain -rw-r--r--color.c4787logplain -rw-r--r--color.h1647logplain -rw-r--r--comm.c2239logplain -rw-r--r--comm.h561logplain -rw-r--r--config.c16262logplain -rw-r--r--config.h2113logplain -rw-r--r--counts.c1026logplain -rw-r--r--counts.h790logplain -rw-r--r--cpumap.c12627logplain -rw-r--r--cpumap.h1954logplain -rw-r--r--cs-etm.h2061logplain -rw-r--r--ctype.c2018logplain -rw-r--r--data-convert-bt.c36671logplain -rw-r--r--data-convert-bt.h302logplain -rw-r--r--data-convert.h141logplain -rw-r--r--data.c3459logplain -rw-r--r--data.h1369logplain -rw-r--r--db-export.c11434logplain -rw-r--r--db-export.h3816logplain -rw-r--r--debug.c4417logplain -rw-r--r--debug.h2023logplain -rw-r--r--demangle-java.c4219logplain -rw-r--r--demangle-java.h249logplain -rw-r--r--demangle-rust.c6602logplain -rw-r--r--demangle-rust.h170logplain -rw-r--r--drv_configs.c1834logplain -rw-r--r--drv_configs.h844logplain -rw-r--r--dso.c31994logplain -rw-r--r--dso.h10399logplain -rw-r--r--dwarf-aux.c33828logplain -rw-r--r--dwarf-aux.h5101logplain -rw-r--r--dwarf-regs.c1816logplain -rw-r--r--env.c1884logplain -rw-r--r--env.h1268logplain -rw-r--r--event.c36670logplain -rw-r--r--event.h15997logplain -rw-r--r--evlist.c47104logplain -rw-r--r--evlist.h12584logplain -rw-r--r--evsel.c63917logplain -rw-r--r--evsel.h13041logplain -rw-r--r--evsel_fprintf.c5831logplain -rw-r--r--find-vdso-map.c581logplain -rw-r--r--genelf.c11653logplain -rw-r--r--genelf.h1814logplain -rw-r--r--genelf_debug.c14374logplain -rwxr-xr-xgenerate-cmdlist.sh1141logplain -rw-r--r--group.h122logplain -rw-r--r--header.c73410logplain -rw-r--r--header.h4365logplain -rw-r--r--help-unknown-cmd.c3221logplain