/* * sound/oss/pas2_midi.c * * The low level driver for the PAS Midi Interface. */ /* * Copyright (C) by Hannu Savolainen 1993-1997 * * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) * Version 2 (June 1991). See the "COPYING" file distributed with this software * for more info. * * Bartlomiej Zolnierkiewicz : Added __init to pas_init_mixer() */ #include #include #include "sound_config.h" #include "pas2.h" extern spinlock_t pas_lock; static int midi_busy, input_opened; static int my_dev; int pas2_mididev=-1; static unsigned char tmp_queue[256]; static volatile int qlen; static volatile unsigned char qhead, qtail; static void (*midi_input_intr) (int dev, unsigned char data); static int pas_midi_open(int dev, int mode, void (*input) (int dev, unsigned char data), void (*output) (int dev) ) { int err; unsigned long flags; unsigned char ctrl; if (midi_busy) return -EBUSY; /* * Reset input and output FIFO pointers */ pas_write(0x20 | 0x40, 0x178b); spin_lock_irqsave(&pas_lock, flags); if ((err = pas_set_intr(0x10)) < 0) { spin_unlock_irqrestore(&pas_lock, flags); return err; } /* * Enable input available and output FIFO empty interrupts */ ctrl = 0; input_opened = 0; midi_input_intr = input; if (mode == OPEN_READ || mode == OPEN_READWRITE) { ctrl |= 0x04; /* Enable input */ input_opened = 1; } if (mode == OPEN_WRITE || mode == OPEN_READWRITE) { ctrl |= 0x08 | 0x10; /* Enable output */ } pas_write(ctrl, 0x178b); /* * Acknowledge any pending interrupts */ pas_write(0xff, 0x1B88); spin_unlock_irqrestore(&pas_lock, flags); midi_busy = 1; qlen = qhead = qtail = 0; return 0; } static void pas_midi_close(int dev) { /* * Reset FIFO pointers, disable intrs */ pas_write(0x20 | 0x40, 0x178b); pas_remove_intr(0x10); midi_busy = 0; } static int dump_to_midi(unsigned char midi_byte) { int fifo_space, x; fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f; /* * The MIDI FIFO space register and it's documentation is nonunderstandable. * There seem to be no way to differentiate between buffer full and buffer * empty situations. For this reason we don't never write the buffer * completely full. In this way we can assume that 0 (or is it 15) * means that the buffer is empty. */ if (fifo_space < 2 && fifo_space != 0) /* Full (almost) */ return 0; /* Ask upper layers to retry after some time */ pas_write(midi_byte, 0x178A); return 1; } static int pas_midi_out(int dev, unsigned char midi_byte) { unsigned long flags; /* * Drain the local queue first */ spin_lock_irqsave(&pas_lock, flags); while (qlen && dump_to_midi(tmp_queue[qhead])) { qlen--; qhead++; } spin_unlock_irqrestore(&pas_lock, flags); /* * Output the byte if the local queue is empty. */ if (!qlen) if (dump_to_midi(midi_byte)) return 1; /* * Put to the local queue */ if (qlen >= 256) return 0; /* Local queue full */ spin_lock_irqsave(&pas_lock, flags); tmp_queue[qtail] = midi_byte; qlen++; qtail++; spin_unlock_irqrestore(&pas_lock, flags); return 1; } static int pas_midi_start_read(int dev) { return 0; } static int pas_midi_end_read(int dev) { return 0; } static void pas_midi_kick(int dev) { } static int pas_buffer_status(int dev) { return qlen; } #define MIDI_SYNTH_NAME "Pro Audio Spectrum Midi" #define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT #include "midi_synth.h" static struct midi_operations pas_midi_operations = { .owner = THIS_MODULE, .info = {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS}, .converter = &std_midi_synth, .in_info = {0}, .open = pas_midi_open, .close = pas_midi_close, .outputc = pas_midi_out, .start_read = pas_midi_start_read, .end_read = pas_midi_end_read, .kick = pas_midi_kick, .buffer_status = pas_buffer_status, }; void __init pas_midi_init(void) { int dev = sound_alloc_mididev(); if (dev == -1) { printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n"); return; } std_midi_synth.midi_dev = my_dev = dev; midi_devs[dev] = &pas_midi_operations; pas2_mididev = dev; sequencer_init(); } void pas_midi_interrupt(void) { unsigned char stat; int i, incount; stat = pas_read(0x1B88); if (stat & 0x04) /* Input data available */ { incount = pas_read(0x1B89) & 0x0f; /* Input FIFO size */ if (!incount) incount = 16; for (i = 0; i < incount; i++) if (input_opened) { midi_input_intr(my_dev, pas_read(0x178A)); } else pas_read(0x178A); /* Flush */ } if (stat & (0x08 | 0x10)) { spin_lock(&pas_lock);/* called in irq context */ while (qlen && dump_to_midi(tmp_queue[qhead])) { qlen--; qhead++; } spin_unlock(&pas_lock); } if (stat & 0x40) { printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat); } pas_write(stat, 0x1B88); /* Acknowledge interrupts */ } parent304d2a7fc8acc1bb337596e0fc301092ea079b4d (diff)
[media] tw686x-kh: add audio support to the TODO list
The mainline tw686x driver also supports audio, that's missing here as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>