/* * sound/oss/uart6850.c * * * Copyright (C) by Hannu Savolainen 1993-1997 * * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) * Version 2 (June 1991). See the "COPYING" file distributed with this software * for more info. * Extended by Alan Cox for Red Hat Software. Now a loadable MIDI driver. * 28/4/97 - (C) Copyright Alan Cox. Released under the GPL version 2. * * Alan Cox: Updated for new modular code. Removed snd_* irq handling. Now * uses native linux resources * Christoph Hellwig: Adapted to module_init/module_exit * Jeff Garzik: Made it work again, in theory * FIXME: If the request_irq() succeeds, the probe succeeds. Ug. * * Status: Testing required (no shit -jgarzik) * * */ #include #include #include #include /* Mon Nov 22 22:38:35 MET 1993 marco@driq.home.usn.nl: * added 6850 support, used with COVOX SoundMaster II and custom cards. */ #include "sound_config.h" static int uart6850_base = 0x330; static int *uart6850_osp; #define DATAPORT (uart6850_base) #define COMDPORT (uart6850_base+1) #define STATPORT (uart6850_base+1) static int uart6850_status(void) { return inb(STATPORT); } #define input_avail() (uart6850_status()&INPUT_AVAIL) #define output_ready() (uart6850_status()&OUTPUT_READY) static void uart6850_cmd(unsigned char cmd) { outb(cmd, COMDPORT); } static int uart6850_read(void) { return inb(DATAPORT); } static void uart6850_write(unsigned char byte) { outb(byte, DATAPORT); } #define OUTPUT_READY 0x02 /* Mask for data ready Bit */ #define INPUT_AVAIL 0x01 /* Mask for Data Send Ready Bit */ #define UART_RESET 0x95 #define UART_MODE_ON 0x03 static int uart6850_opened; static int uart6850_irq; static int uart6850_detected; static int my_dev; static DEFINE_SPINLOCK(lock); static void (*midi_input_intr) (int dev, unsigned char data); static void poll_uart6850(unsigned long dummy); static DEFINE_TIMER(uart6850_timer, poll_uart6850, 0, 0); static void uart6850_input_loop(void) { int count = 10; while (count) { /* * Not timed out */ if (input_avail()) { unsigned char c = uart6850_read(); count = 100; if (uart6850_opened & OPEN_READ) midi_input_intr(my_dev, c); } else { while (!input_avail() && count) count--; } } } static irqreturn_t m6850intr(int irq, void *dev_id) { if (input_avail()) uart6850_input_loop(); return IRQ_HANDLED; } /* * It looks like there is no input interrupts in the UART mode. Let's try * polling. */ static void poll_uart6850(unsigned long dummy) { unsigned long flags; if (!(uart6850_opened & OPEN_READ)) return; /* Device has been closed */ spin_lock_irqsave(&lock,flags); if (input_avail()) uart6850_input_loop(); uart6850_timer.expires = 1 + jiffies; add_timer(&uart6850_timer); /* * Come back later */ spin_unlock_irqrestore(&lock,flags); } static int uart6850_open(int dev, int mode, void (*input) (int dev, unsigned char data), void (*output) (int dev) ) { if (uart6850_opened) { /* printk("Midi6850: Midi busy\n");*/ return -EBUSY; } uart6850_cmd(UART_RESET); uart6850_input_loop(); midi_input_intr = input; uart6850_opened = mode; poll_uart6850(0); /* * Enable input polling */ return 0; } static void uart6850_close(int dev) { uart6850_cmd(UART_MODE_ON); del_timer(&uart6850_timer); uart6850_opened = 0; } static int uart6850_out(int dev, unsigned char midi_byte) { int timeout; unsigned long flags; /* * Test for input since pending input seems to block the output. */ spin_lock_irqsave(&lock,flags); if (input_avail()) uart6850_input_loop(); spin_unlock_irqrestore(&lock,flags); /* * Sometimes it takes about 13000 loops before the output becomes ready * (After reset). Normally it takes just about 10 loops. */ for (timeout = 30000; timeout > 0 && !output_ready(); timeout--); /* * Wait */ if (!output_ready()) { printk(KERN_WARNING "Midi6850: Timeout\n"); return 0; } uart6850_write(midi_byte); return 1; } static inline int uart6850_command(int dev, unsigned char *midi_byte) { return 1; } static inline int uart6850_start_read(int dev) { return 0; } static inline int uart6850_end_read(int dev) { return 0; } static inline void uart6850_kick(int dev) { } static inline int uart6850_buffer_status(int dev) { return 0; /* * No data in buffers */ } #define MIDI_SYNTH_NAME "6850 UART Midi" #define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT #include "midi_synth.h" static struct midi_operations uart6850_operations = { .owner = THIS_MODULE, .info = {"6850 UART", 0, 0, SNDCARD_UART6850}, .converter = &std_midi_synth, .in_info = {0}, .open = uart6850_open, .close = uart6850_close, .outputc = uart6850_out, .start_read = uart6850_start_read, .end_read = uart6850_end_read, .kick = uart6850_kick, .command = uart6850_command, .buffer_status = uart6850_buffer_status }; static void __init attach_uart6850(struct address_info *hw_config) { int ok, timeout; unsigned long flags; if (!uart6850_detected) return; if ((my_dev = sound_alloc_mididev()) == -1) { printk(KERN_INFO "uart6850: Too many midi devices detected\n"); return; } uart6850_base = hw_config->io_base; uart6850_osp = hw_config->osp; uart6850_irq = hw_config->irq; spin_lock_irqsave(&lock,flags); for (timeout = 30000; timeout > 0 && !output_ready(); timeout--); /* * Wait */ uart6850_cmd(UART_MODE_ON); ok = 1; spin_unlock_irqrestore(&lock,flags); conf_printf("6850 Midi Interface", hw_config); std_midi_synth.midi_dev = my_dev; hw_config->slots[4] = my_dev; midi_devs[my_dev] = &uart6850_operations; sequencer_init(); } static inline int reset_uart6850(void) { uart6850_read(); return 1; /* * OK */ } static int __init probe_uart6850(struct address_info *hw_config) { int ok; uart6850_osp = hw_config->osp; uart6850_base = hw_config->io_base; uart6850_irq = hw_config->irq; if (request_irq(uart6850_irq, m6850intr, 0, "MIDI6850", NULL) < 0) return 0; ok = reset_uart6850(); uart6850_detected = ok; return ok; } static void __exit unload_uart6850(struct address_info *hw_config) { free_irq(hw_config->irq, NULL); sound_unload_mididev(hw_config->slots[4]); } static struct address_info cfg_mpu; static int __initdata io = -1; static int __initdata irq = -1; module_param(io, int, 0); module_param(irq, int, 0); static int __init init_uart6850(void) { cfg_mpu.io_base = io; cfg_mpu.irq = irq; if (cfg_mpu.io_base == -1 || cfg_mpu.irq == -1) { printk(KERN_INFO "uart6850: irq and io must be set.\n"); return -EINVAL; } if (probe_uart6850(&cfg_mpu)) return -ENODEV; attach_uart6850(&cfg_mpu); return 0; } static void __exit cleanup_uart6850(void) { unload_uart6850(&cfg_mpu); } module_init(init_uart6850); module_exit(cleanup_uart6850); #ifndef MODULE static int __init setup_uart6850(char *str) { /* io, irq */ int ints[3]; str = get_options(str, ARRAY_SIZE(ints), ints); io = ints[1]; irq = ints[2]; return 1; } __setup("uart6850=", setup_uart6850); #endif MODULE_LICENSE("GPL"); \ action mirred egress mirror \ dev eth2 tc qdisc add dev eth1 handle 1: root prio tc filter add dev eth1 parent 1: \ matchall skip_sw \ action mirred egress mirror \ dev eth2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/net/tc_act')