/* * linux/sound/oss/waveartist.h * * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder */ //registers #define CMDR 0 #define DATR 2 #define CTLR 4 #define STATR 5 #define IRQSTAT 12 //bit defs //reg STATR #define CMD_WE 0x80 #define CMD_RF 0x40 #define DAT_WE 0x20 #define DAT_RF 0x10 #define IRQ_REQ 0x08 #define DMA1 0x04 #define DMA0 0x02 //bit defs //reg CTLR #define CMD_WEIE 0x80 #define CMD_RFIE 0x40 #define DAT_WEIE 0x20 #define DAT_RFIE 0x10 #define RESET 0x08 #define DMA1_IE 0x04 #define DMA0_IE 0x02 #define IRQ_ACK 0x01 //commands #define WACMD_SYSTEMID 0x00 #define WACMD_GETREV 0x00 #define WACMD_INPUTFORMAT 0x10 //0-8S, 1-16S, 2-8U #define WACMD_INPUTCHANNELS 0x11 //1-Mono, 2-Stereo #define WACMD_INPUTSPEED 0x12 //sampling rate #define WACMD_INPUTDMA 0x13 //0-8bit, 1-16bit, 2-PIO #define WACMD_INPUTSIZE 0x14 //samples to interrupt #define WACMD_INPUTSTART 0x15 //start ADC #define WACMD_INPUTPAUSE 0x16 //pause ADC #define WACMD_INPUTSTOP 0x17 //stop ADC #define WACMD_INPUTRESUME 0x18 //resume ADC #define WACMD_INPUTPIO 0x19 //PIO ADC #define WACMD_OUTPUTFORMAT 0x20 //0-8S, 1-16S, 2-8U #define WACMD_OUTPUTCHANNELS 0x21 //1-Mono, 2-Stereo #define WACMD_OUTPUTSPEED 0x22 //sampling rate #define WACMD_OUTPUTDMA 0x23 //0-8bit, 1-16bit, 2-PIO #define WACMD_OUTPUTSIZE 0x24 //samples to interrupt #define WACMD_OUTPUTSTART 0x25 //start ADC #define WACMD_OUTPUTPAUSE 0x26 //pause ADC #define WACMD_OUTPUTSTOP 0x27 //stop ADC #define WACMD_OUTPUTRESUME 0x28 //resume ADC #define WACMD_OUTPUTPIO 0x29 //PIO ADC #define WACMD_GET_LEVEL 0x30 #define WACMD_SET_LEVEL 0x31 #define WACMD_SET_MIXER 0x32 #define WACMD_RST_MIXER 0x33 #define WACMD_SET_MONO 0x34 /* * Definitions for left/right recording input mux */ #define ADC_MUX_NONE 0 #define ADC_MUX_MIXER 1 #define ADC_MUX_LINE 2 #define ADC_MUX_AUX2 3 #define ADC_MUX_AUX1 4 #define ADC_MUX_MIC 5 /* * Definitions for mixer gain settings */ #define MIX_GAIN_LINE 0 /* line in */ #define MIX_GAIN_AUX1 1 /* aux1 */ #define MIX_GAIN_AUX2 2 /* aux2 */ #define MIX_GAIN_XMIC 3 /* crossover mic */ #define MIX_GAIN_MIC 4 /* normal mic */ #define MIX_GAIN_PREMIC 5 /* preamp mic */ #define MIX_GAIN_OUT 6 /* output */ #define MIX_GAIN_MONO 7 /* mono in */ int wa_sendcmd(unsigned int cmd); int wa_writecmd(unsigned int cmd, unsigned int arg); '/>
path: root/drivers/usb/mon/mon_text.c
diff options
context:
space:
mode:
authorChuck Lever <chuck.lever@oracle.com>2017-01-22 14:04:29 -0500
committerTrond Myklebust <trond.myklebust@primarydata.com>2017-01-24 12:50:47 -0500
commit059aa734824165507c65fd30a55ff000afd14983 (patch)
tree63defb4adb0656c4af72a05081b181b163f94b3e /drivers/usb/mon/mon_text.c
parent8ac092519ad91931c96d306c4bfae2c6587c325f (diff)
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
Xuan Qi reports that the Linux NFSv4 client failed to lock a file that was migrated. The steps he observed on the wire: 1. The client sent a LOCK request to the source server 2. The source server replied NFS4ERR_MOVED 3. The client switched to the destination server 4. The client sent the same LOCK request to the destination server with a bumped lock sequence ID 5. The destination server rejected the LOCK request with NFS4ERR_BAD_SEQID RFC 3530 section 8.1.5 provides a list of NFS errors which do not bump a lock sequence ID. However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section 9.1.7, this list has been updated by the addition of NFS4ERR_MOVED. Reported-by: Xuan Qi <xuan.qi@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Diffstat (limited to 'drivers/usb/mon/mon_text.c')