/* * OLPC XO-1 additional sound features * * Copyright © 2006 Jaya Kumar * Copyright © 2007-2008 Andres Salomon * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include "cs5535audio.h" #define DRV_NAME "cs5535audio-olpc" /* * OLPC has an additional feature on top of the regular AD1888 codec features. * It has an Analog Input mode that is switched into (after disabling the * High Pass Filter) via GPIO. It is supported on B2 and later models. */ void olpc_analog_input(struct snd_ac97 *ac97, int on) { int err; if (!machine_is_olpc()) return; /* update the High Pass Filter (via AC97_AD_TEST2) */ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, 1 << AC97_AD_HPFD_SHIFT, on << AC97_AD_HPFD_SHIFT); if (err < 0) { dev_err(ac97->bus->card->dev, "setting High Pass Filter - %d\n", err); return; } /* set Analog Input through GPIO */ gpio_set_value(OLPC_GPIO_MIC_AC, on); } /* * OLPC XO-1's V_REFOUT is a mic bias enable. */ void olpc_mic_bias(struct snd_ac97 *ac97, int on) { int err; if (!machine_is_olpc()) return; on = on ? 0 : 1; err = snd_ac97_update_bits(ac97, AC97_AD_MISC, 1 << AC97_AD_VREFD_SHIFT, on << AC97_AD_VREFD_SHIFT); if (err < 0) dev_err(ac97->bus->card->dev, "setting MIC Bias - %d\n", err); } static int olpc_dc_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int olpc_dc_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) { v->value.integer.value[0] = gpio_get_value(OLPC_GPIO_MIC_AC); return 0; } static int olpc_dc_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) { struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl); olpc_analog_input(cs5535au->ac97, v->value.integer.value[0]); return 1; } static int olpc_mic_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int olpc_mic_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) { struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl); struct snd_ac97 *ac97 = cs5535au->ac97; int i; i = (snd_ac97_read(ac97, AC97_AD_MISC) >> AC97_AD_VREFD_SHIFT) & 0x1; v->value.integer.value[0] = i ? 0 : 1; return 0; } static int olpc_mic_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) { struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl); olpc_mic_bias(cs5535au->ac97, v->value.integer.value[0]); return 1; } static struct snd_kcontrol_new olpc_cs5535audio_ctls[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "DC Mode Enable", .info = olpc_dc_info, .get = olpc_dc_get, .put = olpc_dc_put, .private_value = 0, }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "MIC Bias Enable", .info = olpc_mic_info, .get = olpc_mic_get, .put = olpc_mic_put, .private_value = 0, }, }; void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) { if (!machine_is_olpc()) return; /* invert EAPD if on an OLPC B3 or higher */ if (olpc_board_at_least(olpc_board_pre(0xb3))) ac97->scaps |= AC97_SCAP_INV_EAPD; } int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) { struct snd_ctl_elem_id elem; int i, err; if (!machine_is_olpc()) return 0; if (gpio_request(OLPC_GPIO_MIC_AC, DRV_NAME)) { dev_err(card->dev, "unable to allocate MIC GPIO\n"); return -EIO; } gpio_direction_output(OLPC_GPIO_MIC_AC, 0); /* drop the original AD1888 HPF control */ memset(&elem, 0, sizeof(elem)); elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; strlcpy(elem.name, "High Pass Filter Enable", sizeof(elem.name)); snd_ctl_remove_id(card, &elem); /* drop the original V_REFOUT control */ memset(&elem, 0, sizeof(elem)); elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; strlcpy(elem.name, "V_REFOUT Enable", sizeof(elem.name)); snd_ctl_remove_id(card, &elem); /* add the OLPC-specific controls */ for (i = 0; i < ARRAY_SIZE(olpc_cs5535audio_ctls); i++) { err = snd_ctl_add(card, snd_ctl_new1(&olpc_cs5535audio_ctls[i], ac97->private_data)); if (err < 0) { gpio_free(OLPC_GPIO_MIC_AC); return err; } } /* turn off the mic by default */ olpc_mic_bias(ac97, 0); return 0; } void olpc_quirks_cleanup(void) { gpio_free(OLPC_GPIO_MIC_AC); } d, so we have to do the same slow lookup by using the dst_confirm_neigh() helper. When MSG_PROBE is not used, ip_append_data/ip6_append_data will set the skb flag dst_pending_confirm. Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: 5110effee8fd ("net: Do delayed neigh confirmation.") Fixes: f2bb4bedf35d ("ipv4: Cache output routes in fib_info nexthops.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: add confirm_neigh method to dst_opsJulian Anastasov3-0/+54 Add confirm_neigh method to dst_ops and use it from IPv4 and IPv6 to lookup and confirm the neighbour. Its usage via the new helper dst_confirm_neigh() should be restricted to MSG_PROBE users for performance reasons. For XFRM prefer the last tunnel address, if present. With help from Steffen Klassert. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07tcp: replace dst_confirm with sk_dst_confirmJulian Anastasov3-14/+7 When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. Use the new sk_dst_confirm() helper to propagate the indication from received packets to sock_confirm_neigh(). Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: 5110effee8fd ("net: Do delayed neigh confirmation.") Fixes: f2bb4bedf35d ("ipv4: Cache output routes in fib_info nexthops.") Tested-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07sctp: add dst_pending_confirm flagJulian Anastasov7-12/+31 Add new transport flag to allow sockets to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. The flag is propagated from transport to every packet. It is reset when cached dst is reset. Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: 5110effee8fd ("net: Do delayed neigh confirmation.") Fixes: f2bb4bedf35d ("ipv4: Cache output routes in fib_info nexthops.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: add dst_pending_confirm flag to skbuffJulian Anastasov2-1/+5 Add new skbuff flag to allow protocols to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. Add sock_confirm_neigh() helper to confirm the neighbour and use it for IPv4, IPv6 and VRF before dst_neigh_output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07sock: add sk_dst_pending_confirm flagJulian Anastasov1-0/+2 Add new sock flag to allow sockets to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. As not all call paths lock the socket use full word for the flag. Add sk_dst_confirm as replacement for dst_confirm when called for received packets. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07ipv6: sr: fix non static symbol warningsWei Yongjun1-4/+4 Fixes the following sparse warnings: net/ipv6/seg6_iptunnel.c:58:5: warning: symbol 'nla_put_srh' was not declared. Should it be static? net/ipv6/seg6_iptunnel.c:238:5: warning: symbol 'seg6_input' was not declared. Should it be static? net/ipv6/seg6_iptunnel.c:254:5: warning: symbol 'seg6_output' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net/sched: act_mirred: remove duplicated include from act_mirred.cWei Yongjun1-2/+0 Remove duplicated include. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: dsa: Add support for platform dataFlorian Fainelli1-18/+84 Allow drivers to use the new DSA API with platform data. Most of the code in net/dsa/dsa2.c does not rely so much on device_nodes and can get the same information from platform_data instead. We purposely do not support distributed configurations with platform data, so drivers should be providing a pointer to a 'struct dsa_chip_data' structure if they wish to communicate per-port layout. Multiple CPUs port could potentially be supported and dsa_chip_data is extended to receive up to one reference to an upstream network device per port described by a dsa_chip_data structure. dsa_dev_to_net_device() increments the network device's reference count, so we intentionally call dev_put() to be consistent with the DT-enabled path, until we have a generic notifier based solution. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: dsa: Rename and export dev_to_net_device()Florian Fainelli1-2/+3 In preparation for using this function in net/dsa/dsa2.c, rename the function to make its scope DSA specific, and export it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06bridge: fdb: write to used and updated at most once per jiffyNikolay Aleksandrov2-2/+4 Writing once per jiffy is enough to limit the bridge's false sharing. After this change the bridge doesn't show up in the local load HitM stats. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06bridge: move write-heavy fdb members in their own cache lineNikolay Aleksandrov1-4/+6 Fdb's used and updated fields are written to on every packet forward and packet receive respectively. Thus if we are receiving packets from a particular fdb, they'll cause false-sharing with everyone who has looked it up (even if it didn't match, since mac/vid share cache line!). The "used" field is even worse since it is updated on every packet forward to that fdb, thus the standard config where X ports use a single gateway results in 100% fdb false-sharing. Note that this patch does not prevent the last scenario, but it makes it better for other bridge participants which are not using that fdb (and are only doing lookups over it). The point is with this move we make sure that only communicating parties get the false-sharing, in a later patch we'll show how to avoid that too. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06bridge: move to workqueue gcNikolay Aleksandrov10-23/+29 Move the fdb garbage collector to a workqueue which fires at least 10 milliseconds apart and cleans chain by chain allowing for other tasks to run in the meantime. When having thousands of fdbs the system is much more responsive. Most importantly remove the need to check if the matched entry has expired in __br_fdb_get that causes false-sharing and is completely unnecessary if we cleanup entries, at worst we'll get 10ms of traffic for that entry before it gets deleted. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06bridge: modify bridge and port to have often accessed fields in one cache lineNikolay Aleksandrov1-23/+20 Move around net_bridge so the vlan fields are in the beginning since they're checked on every packet even if vlan filtering is disabled. For the port move flags & vlan group to the beginning, so they're in the same cache line with the port's state (both flags and state are checked on each packet). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: introduce bridge notifierVivien Didelot2-11/+61 A slave device will now notify the switch fabric once its port is bridged or unbridged, instead of calling directly its switch operations. This code allows propagating cross-chip bridging events in the fabric. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: add switch notifierVivien Didelot5-0/+70 Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: change state setter scopeVivien Didelot1-6/+9 The scope of the functions inside net/dsa/slave.c must be the slave net_device pointer. Change to state setter helper accordingly to simplify callers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: rollback bridging on errorVivien Didelot1-1/+13 When an error is returned during the bridging of a port in a NETDEV_CHANGEUPPER event, net/core/dev.c rolls back the operation. Be consistent and unassign dp->bridge_dev when this happens. In the meantime, add comments to document this behavior. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: simplify netdevice events handlingVivien Didelot1-28/+16 Simplify the code handling the slave netdevice notifier call by providing a dsa_slave_changeupper helper for NETDEV_CHANGEUPPER, and so on (only this event is supported at the moment.) Return NOTIFY_DONE when we did not care about an event, and NOTIFY_OK when we were concerned but no error occurred, as the API suggests. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: move netdevice notifier registrationVivien Didelot3-10/+26 Move the netdevice notifier block register code in slave.c and provide helpers for dsa.c to register and unregister it. At the same time, check for errors since (un)register_netdevice_notifier may fail. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net-next: treewide use is_vlan_dev() helper function.Parav Pandit1-1/+2 This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06sctp: process fwd tsn chunk only when prsctp is enabledXin Long1-0/+6 This patch is to check if asoc->peer.prsctp_capable is set before processing fwd tsn chunk, if not, it will return an ERROR to the peer, just as rfc3758 section 3.3.1 demands. Reported-by: Julian Cordes <julian.cordes@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: remove ndo_neigh_{construct, destroy} from stacked devicesIdo Schimmel