#ifndef __ACP_HW_H
#define __ACP_HW_H
#include "include/acp_2_2_d.h"
#include "include/acp_2_2_sh_mask.h"
#define ACP_PAGE_SIZE_4K_ENABLE 0x02
#define ACP_PLAYBACK_PTE_OFFSET 10
#define ACP_CAPTURE_PTE_OFFSET 0
#define ACP_GARLIC_CNTL_DEFAULT 0x00000FB4
#define ACP_ONION_CNTL_DEFAULT 0x00000FB4
#define ACP_PHYSICAL_BASE 0x14000
/* Playback SRAM address (as a destination in dma descriptor) */
#define ACP_SHARED_RAM_BANK_1_ADDRESS 0x4002000
/* Capture SRAM address (as a source in dma descriptor) */
#define ACP_SHARED_RAM_BANK_5_ADDRESS 0x400A000
#define ACP_DMA_RESET_TIME 10000
#define ACP_CLOCK_EN_TIME_OUT_VALUE 0x000000FF
#define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE 0x000000FF
#define ACP_DMA_COMPLETE_TIME_OUT_VALUE 0x000000FF
#define ACP_SRAM_BASE_ADDRESS 0x4000000
#define ACP_DAGB_GRP_SRAM_BASE_ADDRESS 0x4001000
#define ACP_DAGB_GRP_SRBM_SRAM_BASE_OFFSET 0x1000
#define ACP_INTERNAL_APERTURE_WINDOW_0_ADDRESS 0x00000000
#define ACP_INTERNAL_APERTURE_WINDOW_4_ADDRESS 0x01800000
#define TO_ACP_I2S_1 0x2
#define TO_ACP_I2S_2 0x4
#define FROM_ACP_I2S_1 0xa
#define FROM_ACP_I2S_2 0xb
#define ACP_TILE_ON_MASK 0x03
#define ACP_TILE_OFF_MASK 0x02
#define ACP_TILE_ON_RETAIN_REG_MASK 0x1f
#define ACP_TILE_OFF_RETAIN_REG_MASK 0x20
#define ACP_TILE_P1_MASK 0x3e
#define ACP_TILE_P2_MASK 0x3d
#define ACP_TILE_DSP0_MASK 0x3b
#define ACP_TILE_DSP1_MASK 0x37
#define ACP_TILE_DSP2_MASK 0x2f
/* Playback DMA channels */
#define SYSRAM_TO_ACP_CH_NUM 12
#define ACP_TO_I2S_DMA_CH_NUM 13
/* Capture DMA channels */
#define ACP_TO_SYSRAM_CH_NUM 14
#define I2S_TO_ACP_DMA_CH_NUM 15
#define NUM_DSCRS_PER_CHANNEL 2
#define PLAYBACK_START_DMA_DESCR_CH12 0
#define PLAYBACK_END_DMA_DESCR_CH12 1
#define PLAYBACK_START_DMA_DESCR_CH13 2
#define PLAYBACK_END_DMA_DESCR_CH13 3
#define CAPTURE_START_DMA_DESCR_CH14 4
#define CAPTURE_END_DMA_DESCR_CH14 5
#define CAPTURE_START_DMA_DESCR_CH15 6
#define CAPTURE_END_DMA_DESCR_CH15 7
enum acp_dma_priority_level {
/* 0x0 Specifies the DMA channel is given normal priority */
ACP_DMA_PRIORITY_LEVEL_NORMAL = 0x0,
/* 0x1 Specifies the DMA channel is given high priority */
ACP_DMA_PRIORITY_LEVEL_HIGH = 0x1,
ACP_DMA_PRIORITY_LEVEL_FORCESIZE = 0xFF
};
struct audio_substream_data {
struct page *pg;
unsigned int order;
u16 num_of_pages;
u16 direction;
uint64_t size;
void __iomem *acp_mmio;
};
enum {
ACP_TILE_P1 = 0,
ACP_TILE_P2,
ACP_TILE_DSP0,
ACP_TILE_DSP1,
ACP_TILE_DSP2,
};
enum {
ACP_DMA_ATTRIBUTES_SHAREDMEM_TO_DAGB_ONION = 0x0,
ACP_DMA_ATTRIBUTES_SHARED_MEM_TO_DAGB_GARLIC = 0x1,
ACP_DMA_ATTRIBUTES_DAGB_ONION_TO_SHAREDMEM = 0x8,
ACP_DMA_ATTRIBUTES_DAGB_GARLIC_TO_SHAREDMEM = 0x9,
ACP_DMA_ATTRIBUTES_FORCE_SIZE = 0xF
};
typedef struct acp_dma_dscr_transfer {
/* Specifies the source memory location for the DMA data transfer. */
u32 src;
/* Specifies the destination memory location to where the data will
* be transferred.
*/
u32 dest;
/* Specifies the number of bytes need to be transferred
* from source to destination memory.Transfer direction & IOC enable
*/
u32 xfer_val;
/* Reserved for future use */
u32 reserved;
} acp_dma_dscr_transfer_t;
#endif /*__ACP_HW_H */
elftests/gpio?id=c3afa9955382ea5496e8997b307690aaca6e6e2f'>gpio/gpio-mockup-sysfs.sh
perf/x86/intel/rapl: Make package handling more robust
The package management code in RAPL relies on package mapping being
available before a CPU is started. This changed with:
9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")
because the ACPI/BIOS information turned out to be unreliable, but that
left RAPL in broken state. This was not noticed because on a regular boot
all CPUs are online before RAPL is initialized.
A possible fix would be to reintroduce the mess which allocates a package
data structure in CPU prepare and when it turns out to already exist in
starting throw it away later in the CPU online callback. But that's a
horrible hack and not required at all because RAPL becomes functional for
perf only in the CPU online callback. That's correct because user space is
not yet informed about the CPU being onlined, so nothing caan rely on RAPL
being available on that particular CPU.
Move the allocation to the CPU online callback and simplify the hotplug
handling. At this point the package mapping is established and correct.
This also adds a missing check for available package data in the
event_init() function.
Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")
Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>