#ifndef __ACP_HW_H
#define __ACP_HW_H
#include "include/acp_2_2_d.h"
#include "include/acp_2_2_sh_mask.h"
#define ACP_PAGE_SIZE_4K_ENABLE 0x02
#define ACP_PLAYBACK_PTE_OFFSET 10
#define ACP_CAPTURE_PTE_OFFSET 0
#define ACP_GARLIC_CNTL_DEFAULT 0x00000FB4
#define ACP_ONION_CNTL_DEFAULT 0x00000FB4
#define ACP_PHYSICAL_BASE 0x14000
/* Playback SRAM address (as a destination in dma descriptor) */
#define ACP_SHARED_RAM_BANK_1_ADDRESS 0x4002000
/* Capture SRAM address (as a source in dma descriptor) */
#define ACP_SHARED_RAM_BANK_5_ADDRESS 0x400A000
#define ACP_DMA_RESET_TIME 10000
#define ACP_CLOCK_EN_TIME_OUT_VALUE 0x000000FF
#define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE 0x000000FF
#define ACP_DMA_COMPLETE_TIME_OUT_VALUE 0x000000FF
#define ACP_SRAM_BASE_ADDRESS 0x4000000
#define ACP_DAGB_GRP_SRAM_BASE_ADDRESS 0x4001000
#define ACP_DAGB_GRP_SRBM_SRAM_BASE_OFFSET 0x1000
#define ACP_INTERNAL_APERTURE_WINDOW_0_ADDRESS 0x00000000
#define ACP_INTERNAL_APERTURE_WINDOW_4_ADDRESS 0x01800000
#define TO_ACP_I2S_1 0x2
#define TO_ACP_I2S_2 0x4
#define FROM_ACP_I2S_1 0xa
#define FROM_ACP_I2S_2 0xb
#define ACP_TILE_ON_MASK 0x03
#define ACP_TILE_OFF_MASK 0x02
#define ACP_TILE_ON_RETAIN_REG_MASK 0x1f
#define ACP_TILE_OFF_RETAIN_REG_MASK 0x20
#define ACP_TILE_P1_MASK 0x3e
#define ACP_TILE_P2_MASK 0x3d
#define ACP_TILE_DSP0_MASK 0x3b
#define ACP_TILE_DSP1_MASK 0x37
#define ACP_TILE_DSP2_MASK 0x2f
/* Playback DMA channels */
#define SYSRAM_TO_ACP_CH_NUM 12
#define ACP_TO_I2S_DMA_CH_NUM 13
/* Capture DMA channels */
#define ACP_TO_SYSRAM_CH_NUM 14
#define I2S_TO_ACP_DMA_CH_NUM 15
#define NUM_DSCRS_PER_CHANNEL 2
#define PLAYBACK_START_DMA_DESCR_CH12 0
#define PLAYBACK_END_DMA_DESCR_CH12 1
#define PLAYBACK_START_DMA_DESCR_CH13 2
#define PLAYBACK_END_DMA_DESCR_CH13 3
#define CAPTURE_START_DMA_DESCR_CH14 4
#define CAPTURE_END_DMA_DESCR_CH14 5
#define CAPTURE_START_DMA_DESCR_CH15 6
#define CAPTURE_END_DMA_DESCR_CH15 7
enum acp_dma_priority_level {
/* 0x0 Specifies the DMA channel is given normal priority */
ACP_DMA_PRIORITY_LEVEL_NORMAL = 0x0,
/* 0x1 Specifies the DMA channel is given high priority */
ACP_DMA_PRIORITY_LEVEL_HIGH = 0x1,
ACP_DMA_PRIORITY_LEVEL_FORCESIZE = 0xFF
};
struct audio_substream_data {
struct page *pg;
unsigned int order;
u16 num_of_pages;
u16 direction;
uint64_t size;
void __iomem *acp_mmio;
};
enum {
ACP_TILE_P1 = 0,
ACP_TILE_P2,
ACP_TILE_DSP0,
ACP_TILE_DSP1,
ACP_TILE_DSP2,
};
enum {
ACP_DMA_ATTRIBUTES_SHAREDMEM_TO_DAGB_ONION = 0x0,
ACP_DMA_ATTRIBUTES_SHARED_MEM_TO_DAGB_GARLIC = 0x1,
ACP_DMA_ATTRIBUTES_DAGB_ONION_TO_SHAREDMEM = 0x8,
ACP_DMA_ATTRIBUTES_DAGB_GARLIC_TO_SHAREDMEM = 0x9,
ACP_DMA_ATTRIBUTES_FORCE_SIZE = 0xF
};
typedef struct acp_dma_dscr_transfer {
/* Specifies the source memory location for the DMA data transfer. */
u32 src;
/* Specifies the destination memory location to where the data will
* be transferred.
*/
u32 dest;
/* Specifies the number of bytes need to be transferred
* from source to destination memory.Transfer direction & IOC enable
*/
u32 xfer_val;
/* Reserved for future use */
u32 reserved;
} acp_dma_dscr_transfer_t;
#endif /*__ACP_HW_H */
7'>78 9 10 15 20 25 30 35 40 space: include ignore mode: unified ssdiff stat only net: add LINUX_MIB_PFMEMALLOCDROP counter
Debugging issues caused by pfmemalloc is often tedious.
Add a new SNMP counter to more easily diagnose these problems.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 files changed, 1 insertions, 0 deletions
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h