/*
 * File:         sound/soc/blackfin/bf5xx-ssm2602.c
 * Author:       Cliff Cai <Cliff.Cai@analog.com>
 *
 * Created:      Tue June 06 2008
 * Description:  board driver for SSM2602 sound chip
 *
 * Modified:
 *               Copyright 2008 Analog Devices Inc.
 *
 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see the file COPYING, or write
 * to the Free Software Foundation, Inc.,
 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>

#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>

#include <asm/dma.h>
#include <asm/portmux.h>
#include <linux/gpio.h>
#include "../codecs/ssm2602.h"
#include "bf5xx-sport.h"

static struct snd_soc_card bf5xx_ssm2602;

static int bf5xx_ssm2602_dai_init(struct snd_soc_pcm_runtime *rtd)
{
	/*
	 * If you are using a crystal source which frequency is not 12MHz
	 * then modify the below case statement with frequency of the crystal.
	 *
	 * If you are using the SPORT to generate clocking then this is
	 * where to do it.
	 */
	return snd_soc_dai_set_sysclk(rtd->codec_dai, SSM2602_SYSCLK, 12000000,
		SND_SOC_CLOCK_IN);
}

/* CODEC is master for BCLK and LRC in this configuration. */
#define BF5XX_SSM2602_DAIFMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \
				SND_SOC_DAIFMT_CBM_CFM)

static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = {
	{
		.name = "ssm2602",
		.stream_name = "SSM2602",
		.cpu_dai_name = "bfin-i2s.0",
		.codec_dai_name = "ssm2602-hifi",
		.platform_name = "bfin-i2s-pcm-audio",
		.codec_name = "ssm2602.0-001b",
		.init = bf5xx_ssm2602_dai_init,
		.dai_fmt = BF5XX_SSM2602_DAIFMT,
	},
	{
		.name = "ssm2602",
		.stream_name = "SSM2602",
		.cpu_dai_name = "bfin-i2s.1",
		.codec_dai_name = "ssm2602-hifi",
		.platform_name = "bfin-i2s-pcm-audio",
		.codec_name = "ssm2602.0-001b",
		.init = bf5xx_ssm2602_dai_init,
		.dai_fmt = BF5XX_SSM2602_DAIFMT,
	},
};

static struct snd_soc_card bf5xx_ssm2602 = {
	.name = "bfin-ssm2602",
	.owner = THIS_MODULE,
	.dai_link = &bf5xx_ssm2602_dai[CONFIG_SND_BF5XX_SPORT_NUM],
	.num_links = 1,
};

static struct platform_device *bf5xx_ssm2602_snd_device;

static int __init bf5xx_ssm2602_init(void)
{
	int ret;

	pr_debug("%s enter\n", __func__);
	bf5xx_ssm2602_snd_device = platform_device_alloc("soc-audio", -1);
	if (!bf5xx_ssm2602_snd_device)
		return -ENOMEM;

	platform_set_drvdata(bf5xx_ssm2602_snd_device, &bf5xx_ssm2602);
	ret = platform_device_add(bf5xx_ssm2602_snd_device);

	if (ret)
		platform_device_put(bf5xx_ssm2602_snd_device);

	return ret;
}

static void __exit bf5xx_ssm2602_exit(void)
{
	pr_debug("%s enter\n", __func__);
	platform_device_unregister(bf5xx_ssm2602_snd_device);
}

module_init(bf5xx_ssm2602_init);
module_exit(bf5xx_ssm2602_exit);

/* Module information */
MODULE_AUTHOR("Cliff Cai");
MODULE_DESCRIPTION("ALSA SoC SSM2602 BF527-EZKIT");
MODULE_LICENSE("GPL");

/td></tr>
<tr class='nohover-highlight'><td/><td colspan='5' class='logmsg'>
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.11

It's nice to see rt2x00 development has becoming active, for example
adding support for a new chip version. Also wcn36xx has been converted
to use the recently merged QCOM_SMD subsystem. Otherwise new features
and fixes it lots of drivers.

Major changes:

iwlwifi

* some more work in preparation for A000 family support
* add support for radiotap timestamps
* some work on our firmware debugging capabilities

wcn36xx

* convert to a proper QCOM_SMD driver (from the platform_driver interface)

ath10k

* VHT160 support
* dump Copy Engine registers during firmware crash
* search board file extension from SMBIOS

wil6210

* add disable_ap_sme module parameter

rt2x00

* support RT3352 with external PA
* support for RT3352 with 20MHz crystal
* add support for RT5350 WiSoC

brcmfmac

* add support for BCM43455 sdio device

rtl8xxxu

* add support for D-Link DWA-131 rev E1, TP-Link TL-WN822N v4 and others
====================

Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;


</td></tr>