/* * rt286.h -- RT286 ALSA SoC audio driver * * Copyright 2011 Realtek Microelectronics * Author: Johnny Hsu * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __RT286_H__ #define __RT286_H__ #define VERB_CMD(V, N, D) ((N << 20) | (V << 8) | D) #define RT286_AUDIO_FUNCTION_GROUP 0x01 #define RT286_DAC_OUT1 0x02 #define RT286_DAC_OUT2 0x03 #define RT286_ADC_IN1 0x09 #define RT286_ADC_IN2 0x08 #define RT286_MIXER_IN 0x0b #define RT286_MIXER_OUT1 0x0c #define RT286_MIXER_OUT2 0x0d #define RT286_DMIC1 0x12 #define RT286_DMIC2 0x13 #define RT286_SPK_OUT 0x14 #define RT286_MIC1 0x18 #define RT286_LINE1 0x1a #define RT286_BEEP 0x1d #define RT286_SPDIF 0x1e #define RT286_VENDOR_REGISTERS 0x20 #define RT286_HP_OUT 0x21 #define RT286_MIXER_IN1 0x22 #define RT286_MIXER_IN2 0x23 #define RT286_SET_PIN_SFT 6 #define RT286_SET_PIN_ENABLE 0x40 #define RT286_SET_PIN_DISABLE 0 #define RT286_SET_EAPD_HIGH 0x2 #define RT286_SET_EAPD_LOW 0 #define RT286_MUTE_SFT 7 /* Verb commands */ #define RT286_GET_PARAM(NID, PARAM) VERB_CMD(AC_VERB_PARAMETERS, NID, PARAM) #define RT286_SET_POWER(NID) VERB_CMD(AC_VERB_SET_POWER_STATE, NID, 0) #define RT286_SET_AUDIO_POWER RT286_SET_POWER(RT286_AUDIO_FUNCTION_GROUP) #define RT286_SET_HPO_POWER RT286_SET_POWER(RT286_HP_OUT) #define RT286_SET_SPK_POWER RT286_SET_POWER(RT286_SPK_OUT) #define RT286_SET_DMIC1_POWER RT286_SET_POWER(RT286_DMIC1) #define RT286_SPK_MUX\ VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_SPK_OUT, 0) #define RT286_HPO_MUX\ VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_HP_OUT, 0) #define RT286_ADC0_MUX\ VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN1, 0) #define RT286_ADC1_MUX\ VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN2, 0) #define RT286_SET_MIC1\ VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_MIC1, 0) #define RT286_SET_PIN_HPO\ VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_HP_OUT, 0) #define RT286_SET_PIN_SPK\ VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_SPK_OUT, 0) #define RT286_SET_PIN_DMIC1\ VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_DMIC1, 0) #define RT286_SPK_EAPD\ VERB_CMD(AC_VERB_SET_EAPD_BTLENABLE, RT286_SPK_OUT, 0) #define RT286_SET_AMP_GAIN_HPO\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0) #define RT286_SET_AMP_GAIN_ADC_IN1\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0) #define RT286_SET_AMP_GAIN_ADC_IN2\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN2, 0) #define RT286_GET_HP_SENSE\ VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_HP_OUT, 0) #define RT286_GET_MIC1_SENSE\ VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_MIC1, 0) #define RT286_SET_DMIC2_DEFAULT\ VERB_CMD(AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, RT286_DMIC2, 0) #define RT286_DACL_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0xa000) #define RT286_DACR_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0x9000) #define RT286_ADCL_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0x6000) #define RT286_ADCR_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0x5000) #define RT286_MIC_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIC1, 0x7000) #define RT286_SPOL_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0xa000) #define RT286_SPOR_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0x9000) #define RT286_HPOL_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0xa000) #define RT286_HPOR_GAIN\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0x9000) #define RT286_F_DAC_SWITCH\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0x7000) #define RT286_F_RECMIX_SWITCH\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0x7100) #define RT286_REC_MIC_SWITCH\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7000) #define RT286_REC_I2S_SWITCH\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7100) #define RT286_REC_LINE_SWITCH\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7200) #define RT286_REC_BEEP_SWITCH\ VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7300) #define RT286_DAC_FORMAT\ VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_DAC_OUT1, 0) #define RT286_ADC_FORMAT\ VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_ADC_IN1, 0) #define RT286_COEF_INDEX\ VERB_CMD(AC_VERB_SET_COEF_INDEX, RT286_VENDOR_REGISTERS, 0) #define RT286_PROC_COEF\ VERB_CMD(AC_VERB_SET_PROC_COEF, RT286_VENDOR_REGISTERS, 0) #define RT286_SET_GPIO_MASK\ VERB_CMD(AC_VERB_SET_GPIO_MASK, RT286_AUDIO_FUNCTION_GROUP, 0) #define RT286_SET_GPIO_DIRECTION\ VERB_CMD(AC_VERB_SET_GPIO_DIRECTION, RT286_AUDIO_FUNCTION_GROUP, 0) #define RT286_SET_GPIO_DATA\ VERB_CMD(AC_VERB_SET_GPIO_DATA, RT286_AUDIO_FUNCTION_GROUP, 0) /* Index registers */ #define RT286_A_BIAS_CTRL1 0x01 #define RT286_A_BIAS_CTRL2 0x02 #define RT286_POWER_CTRL1 0x03 #define RT286_A_BIAS_CTRL3 0x04 #define RT286_POWER_CTRL2 0x08 #define RT286_I2S_CTRL1 0x09 #define RT286_I2S_CTRL2 0x0a #define RT286_CLK_DIV 0x0b #define RT286_DC_GAIN 0x0d #define RT286_POWER_CTRL3 0x0f #define RT286_MIC1_DET_CTRL 0x19 #define RT286_MISC_CTRL1 0x20 #define RT286_GPIO_CTRL 0x29 #define RT286_IRQ_CTRL 0x33 #define RT286_PLL_CTRL1 0x49 #define RT286_CBJ_CTRL1 0x4f #define RT286_CBJ_CTRL2 0x50 #define RT286_PLL_CTRL 0x63 #define RT286_DEPOP_CTRL1 0x66 #define RT286_DEPOP_CTRL2 0x67 #define RT286_DEPOP_CTRL3 0x68 #define RT286_DEPOP_CTRL4 0x69 /* SPDIF (0x06) */ #define RT286_SPDIF_SEL_SFT 0 #define RT286_SPDIF_SEL_PCM0 0 #define RT286_SPDIF_SEL_PCM1 1 #define RT286_SPDIF_SEL_SPOUT 2 #define RT286_SPDIF_SEL_PP 3 /* RECMIX (0x0b) */ #define RT286_M_REC_BEEP_SFT 0 #define RT286_M_REC_LINE1_SFT 1 #define RT286_M_REC_MIC1_SFT 2 #define RT286_M_REC_I2S_SFT 3 /* Front (0x0c) */ #define RT286_M_FRONT_DAC_SFT 0 #define RT286_M_FRONT_REC_SFT 1 /* SPK-OUT (0x14) */ #define RT286_M_SPK_MUX_SFT 14 #define RT286_SPK_SEL_MASK 0x1 #define RT286_SPK_SEL_SFT 0 #define RT286_SPK_SEL_F 0 #define RT286_SPK_SEL_S 1 /* HP-OUT (0x21) */ #define RT286_M_HP_MUX_SFT 14 #define RT286_HP_SEL_MASK 0x1 #define RT286_HP_SEL_SFT 0 #define RT286_HP_SEL_F 0 #define RT286_HP_SEL_S 1 /* ADC (0x22) (0x23) */ #define RT286_ADC_SEL_MASK 0x7 #define RT286_ADC_SEL_SFT 0 #define RT286_ADC_SEL_SURR 0 #define RT286_ADC_SEL_FRONT 1 #define RT286_ADC_SEL_DMIC 2 #define RT286_ADC_SEL_BEEP 4 #define RT286_ADC_SEL_LINE1 5 #define RT286_ADC_SEL_I2S 6 #define RT286_ADC_SEL_MIC1 7 #define RT286_SCLK_S_MCLK 0 #define RT286_SCLK_S_PLL 1 enum { RT286_AIF1, RT286_AIF2, RT286_AIFS, }; int rt286_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack); #endif /* __RT286_H__ */ p by replacing the spinlock with a mutex. Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'sound/soc/pxa/mmp-sspa.h')