config SND_OMAP_SOC tristate "SoC Audio for the Texas Instruments OMAP chips" depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST) select SND_DMAENGINE_PCM config SND_OMAP_SOC_DMIC tristate config SND_OMAP_SOC_MCBSP tristate config SND_OMAP_SOC_MCPDM tristate config SND_OMAP_SOC_HDMI_AUDIO tristate "HDMI audio support for OMAP4+ based SoCs" depends on SND_OMAP_SOC help For HDMI audio to work OMAPDSS HDMI support should be enabled. The hdmi audio driver implements cpu-dai component using the callbacks provided by OMAPDSS and registers the component under DSS HDMI device. Omap-pcm is registered for platform component also under DSS HDMI device. Dummy codec is used as as codec component. The hdmi audio driver implements also the card and registers it under its own platform device. The device for the driver is registered by OMAPDSS hdmi driver. config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C depends on OMAP_MUX select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC3X help Say Y if you want to add support for SoC audio on Nokia N810. config SND_OMAP_SOC_RX51 tristate "SoC Audio support for Nokia N900 (RX-51)" depends on SND_OMAP_SOC && ARM && I2C select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC3X select SND_SOC_TPA6130A2 depends on GPIOLIB help Say Y if you want to add support for SoC audio on Nokia N900 cellphone. config SND_OMAP_SOC_AMS_DELTA tristate "SoC Audio support for Amstrad E3 (Delta) videophone" depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY select SND_OMAP_SOC_MCBSP select SND_SOC_CX20442 help Say Y if you want to add support for SoC audio device connected to a handset and a speakerphone found on Amstrad E3 (Delta) videophone. Note that in order to get those devices fully supported, you have to build the kernel with standard serial port driver included and configured for at least 4 ports. Then, from userspace, you must load a line discipline #19 on the modem (ttyS3) serial line. The simplest way to achieve this is to install util-linux-ng and use the included ldattach utility. This can be started automatically from udev, a simple rule like this one should do the trick (it does for me): ACTION=="add", KERNEL=="controlC0", \ RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" config SND_OMAP_SOC_OSK5912 tristate "SoC Audio support for omap osk5912" depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC23_I2C help Say Y if you want to add support for SoC audio on osk5912. config SND_OMAP_SOC_AM3517EVM tristate "SoC Audio support for OMAP3517 / AM3517 EVM" depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC23_I2C help Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517 EVM. config SND_OMAP_SOC_OMAP_TWL4030 tristate "SoC Audio support for TI SoC based boards with twl4030 codec" depends on TWL4030_CORE && SND_OMAP_SOC select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on TI SoC based boards using twl4030 as c codec. This driver currently supports: - Beagleboard or Devkit8000 - Gumstix Overo or CompuLab CM-T35/CM-T3730 - IGEP v2 - OMAP3EVM - SDP3430 - Zoom2 config SND_OMAP_SOC_OMAP_ABE_TWL6040 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" depends on TWL6040_CORE && SND_OMAP_SOC && COMMON_CLK depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST select SND_OMAP_SOC_DMIC select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040 select SND_SOC_DMIC select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS) select CLK_TWL6040 help Say Y if you want to add support for SoC audio on OMAP boards using ABE and twl6040 codec. This driver currently supports: - SDP4430/Blaze boards - PandaBoard (4430) - PandaBoardES (4460) - omap5-uevm (5432) config SND_OMAP_SOC_OMAP3_PANDORA tristate "SoC Audio support for OMAP3 Pandora" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on the OMAP3 Pandora. ='selected'>unified
Diffstat (limited to 'sound/usb')