/* * Line 6 Linux USB driver * * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation, version 2. * */ #include #include #include #include #include #include #include #include "capture.h" #include "driver.h" #include "playback.h" /* Locate name in binary program dump */ #define POD_NAME_OFFSET 0 #define POD_NAME_LENGTH 16 /* Other constants */ #define POD_CONTROL_SIZE 0x80 #define POD_BUFSIZE_DUMPREQ 7 #define POD_STARTUP_DELAY 1000 /* Stages of POD startup procedure */ enum { POD_STARTUP_INIT = 1, POD_STARTUP_VERSIONREQ, POD_STARTUP_WORKQUEUE, POD_STARTUP_SETUP, POD_STARTUP_LAST = POD_STARTUP_SETUP - 1 }; enum { LINE6_BASSPODXT, LINE6_BASSPODXTLIVE, LINE6_BASSPODXTPRO, LINE6_POCKETPOD, LINE6_PODXT, LINE6_PODXTLIVE_POD, LINE6_PODXTPRO, }; struct usb_line6_pod { /* Generic Line 6 USB data */ struct usb_line6 line6; /* Instrument monitor level */ int monitor_level; /* Timer for device initialization */ struct timer_list startup_timer; /* Work handler for device initialization */ struct work_struct startup_work; /* Current progress in startup procedure */ int startup_progress; /* Serial number of device */ u32 serial_number; /* Firmware version (x 100) */ int firmware_version; /* Device ID */ int device_id; }; #define POD_SYSEX_CODE 3 /* *INDENT-OFF* */ enum { POD_SYSEX_SAVE = 0x24, POD_SYSEX_SYSTEM = 0x56, POD_SYSEX_SYSTEMREQ = 0x57, /* POD_SYSEX_UPDATE = 0x6c, */ /* software update! */ POD_SYSEX_STORE = 0x71, POD_SYSEX_FINISH = 0x72, POD_SYSEX_DUMPMEM = 0x73, POD_SYSEX_DUMP = 0x74, POD_SYSEX_DUMPREQ = 0x75 /* dumps entire internal memory of PODxt Pro */ /* POD_SYSEX_DUMPMEM2 = 0x76 */ }; enum { POD_MONITOR_LEVEL = 0x04, POD_SYSTEM_INVALID = 0x10000 }; /* *INDENT-ON* */ enum { POD_DUMP_MEMORY = 2 }; enum { POD_BUSY_READ, POD_BUSY_WRITE, POD_CHANNEL_DIRTY, POD_SAVE_PRESSED, POD_BUSY_MIDISEND }; static struct snd_ratden pod_ratden = { .num_min = 78125, .num_max = 78125, .num_step = 1, .den = 2 }; static struct line6_pcm_properties pod_pcm_properties = { .playback_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_SYNC_START), .formats = SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_KNOT, .rate_min = 39062, .rate_max = 39063, .channels_min = 2, .channels_max = 2, .buffer_bytes_max = 60000, .period_bytes_min = 64, .period_bytes_max = 8192, .periods_min = 1, .periods_max = 1024}, .capture_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START), .formats = SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_KNOT, .rate_min = 39062, .rate_max = 39063, .channels_min = 2, .channels_max = 2, .buffer_bytes_max = 60000, .period_bytes_min = 64, .period_bytes_max = 8192, .periods_min = 1, .periods_max = 1024}, .rates = { .nrats = 1, .rats = &pod_ratden}, .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */ }; static const char pod_version_header[] = { 0xf2, 0x7e, 0x7f, 0x06, 0x02 }; /* forward declarations: */ static void pod_startup2(unsigned long data); static void pod_startup3(struct usb_line6_pod *pod); static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, int size) { return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, size); } /* Process a completely received message. */ static void line6_pod_process_message(struct usb_line6 *line6) { struct usb_line6_pod *pod = (struct usb_line6_pod *) line6; const unsigned char *buf = pod->line6.buffer_message; if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) { pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15]; pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) | (int) buf[10]; pod_startup3(pod); return; } /* Only look for sysex messages from this device */ if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) && buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) { return; } if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0) return; if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) { short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) | ((int)buf[9] << 4) | (int)buf[10]; pod->monitor_level = value; } } /* Send system parameter (from integer). */ static int pod_set_system_param_int(struct usb_line6_pod *pod, int value, int code) { char *sysex; static const int size = 5; sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size); if (!sysex) return -ENOMEM; sysex[SYSEX_DATA_OFS] = code; sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f; sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f; sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f; sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f; line6_send_sysex_message(&pod->line6, sysex, size); kfree(sysex); return 0; } /* "read" request on "serial_number" special file. */ static ssize_t serial_number_show(struct device *dev, struct device_attribute *attr, char *buf) { struct snd_card *card = dev_to_snd_card(dev); struct usb_line6_pod *pod = card->private_data; return sprintf(buf, "%u\n", pod->serial_number); } /* "read" request on "firmware_version" special file. */ static ssize_t firmware_version_show(struct device *dev, struct device_attribute *attr, char *buf) { struct snd_card *card = dev_to_snd_card(dev); struct usb_line6_pod *pod = card->private_data; return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100, pod->firmware_version % 100); } /* "read" request on "device_id" special file. */ static ssize_t device_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct snd_card *card = dev_to_snd_card(dev); struct usb_line6_pod *pod = card->private_data; return sprintf(buf, "%d\n", pod->device_id); } /* POD startup procedure. This is a sequence of functions with special requirements (e.g., must not run immediately after initialization, must not run in interrupt context). After the last one has finished, the device is ready to use. */ static void pod_startup1(struct usb_line6_pod *pod) { CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT); /* delay startup procedure: */ line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2, (unsigned long)pod); } static void pod_startup2(unsigned long data) { struct usb_line6_pod *pod = (struct usb_line6_pod *)data; struct usb_line6 *line6 = &pod->line6; CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ); /* request firmware version: */ line6_version_request_async(line6); } static void pod_startup3(struct usb_line6_pod *pod) { CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE); /* schedule work for global work queue: */ schedule_work(&pod->startup_work); } static void pod_startup4(struct work_struct *work) { struct usb_line6_pod *pod = container_of(work, struct usb_line6_pod, startup_work); struct usb_line6 *line6 = &pod->line6; CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP); /* serial number: */ line6_read_serial_number(&pod->line6, &pod->serial_number); /* ALSA audio interface: */ snd_card_register(line6->card); } /* POD special files: */ static DEVICE_ATTR_RO(device_id); static DEVICE_ATTR_RO(firmware_version); static DEVICE_ATTR_RO(serial_number); static struct attribute *pod_dev_attrs[] = { &dev_attr_device_id.attr, &dev_attr_firmware_version.attr, &dev_attr_serial_number.attr, NULL }; static const struct attribute_group pod_dev_attr_group = { .name = "pod", .attrs = pod_dev_attrs, }; /* control info callback */ static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; uinfo->value.integer.min = 0; uinfo->value.integer.max = 65535; return 0; } /* control get callback */ static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6; ucontrol->value.integer.value[0] = pod->monitor_level; return 0; } /* control put callback */ static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6; if (ucontrol->value.integer.value[0] == pod->monitor_level) return 0; pod->monitor_level = ucontrol->value.integer.value[0]; pod_set_system_param_int(pod, ucontrol->value.integer.value[0], POD_MONITOR_LEVEL); return 1; } /* control definition */ static struct snd_kcontrol_new pod_control_monitor = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Monitor Playback Volume", .index = 0, .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, .info = snd_pod_control_monitor_info, .get = snd_pod_control_monitor_get, .put = snd_pod_control_monitor_put }; /* POD device disconnected. */ static void line6_pod_disconnect(struct usb_line6 *line6) { struct usb_line6_pod *pod = (struct usb_line6_pod *)line6; del_timer_sync(&pod->startup_timer); cancel_work_sync(&pod->startup_work); } /* Try to init POD device. */ static int pod_init(struct usb_line6 *line6, const struct usb_device_id *id) { int err; struct usb_line6_pod *pod = (struct usb_line6_pod *) line6; line6->process_message = line6_pod_process_message; line6->disconnect = line6_pod_disconnect; init_timer(&pod->startup_timer); INIT_WORK(&pod->startup_work, pod_startup4); /* create sysfs entries: */ err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group); if (err < 0) return err; /* initialize MIDI subsystem: */ err = line6_init_midi(line6); if (err < 0) return err; /* initialize PCM subsystem: */ err = line6_init_pcm(line6, &pod_pcm_properties); if (err < 0) return err; /* register monitor control: */ err = snd_ctl_add(line6->card, snd_ctl_new1(&pod_control_monitor, line6->line6pcm)); if (err < 0) return err; /* When the sound card is registered at this point, the PODxt Live displays "Invalid Code Error 07", so we do it later in the event handler. */ if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) { pod->monitor_level = POD_SYSTEM_INVALID; /* initiate startup procedure: */ pod_startup1(pod); } return 0; } #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod) #define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n) /* table of devices that work with this driver */ static const struct usb_device_id pod_id_table[] = { { LINE6_DEVICE(0x4250), .driver_info = LINE6_BASSPODXT }, { LINE6_DEVICE(0x4642), .driver_info = LINE6_BASSPODXTLIVE }, { LINE6_DEVICE(0x4252), .driver_info = LINE6_BASSPODXTPRO }, { LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD }, { LINE6_DEVICE(0x5044), .driver_info = LINE6_PODXT }, { LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD }, { LINE6_DEVICE(0x5050), .driver_info = LINE6_PODXTPRO }, {} }; MODULE_DEVICE_TABLE(usb, pod_id_table); static const struct line6_properties pod_properties_table[] = { [LINE6_BASSPODXT] = { .id = "BassPODxt", .name = "BassPODxt", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI | LINE6_CAP_PCM | LINE6_CAP_HWMON, .altsetting = 5, .ep_ctrl_r = 0x84, .ep_ctrl_w = 0x03, .ep_audio_r = 0x82, .ep_audio_w = 0x01, }, [LINE6_BASSPODXTLIVE] = { .id = "BassPODxtLive", .name = "BassPODxt Live", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI | LINE6_CAP_PCM | LINE6_CAP_HWMON, .altsetting = 1, .ep_ctrl_r = 0x84, .ep_ctrl_w = 0x03, .ep_audio_r = 0x82, .ep_audio_w = 0x01, }, [LINE6_BASSPODXTPRO] = { .id = "BassPODxtPro", .name = "BassPODxt Pro", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI | LINE6_CAP_PCM | LINE6_CAP_HWMON, .altsetting = 5, .ep_ctrl_r = 0x84, .ep_ctrl_w = 0x03, .ep_audio_r = 0x82, .ep_audio_w = 0x01, }, [LINE6_POCKETPOD] = { .id = "PocketPOD", .name = "Pocket POD", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI, .altsetting = 0, .ep_ctrl_r = 0x82, .ep_ctrl_w = 0x02, /* no audio channel */ }, [LINE6_PODXT] = { .id = "PODxt", .name = "PODxt", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI | LINE6_CAP_PCM | LINE6_CAP_HWMON, .altsetting = 5, .ep_ctrl_r = 0x84, .ep_ctrl_w = 0x03, .ep_audio_r = 0x82, .ep_audio_w = 0x01, }, [LINE6_PODXTLIVE_POD] = { .id = "PODxtLive", .name = "PODxt Live", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI | LINE6_CAP_PCM | LINE6_CAP_HWMON, .altsetting = 1, .ep_ctrl_r = 0x84, .ep_ctrl_w = 0x03, .ep_audio_r = 0x82, .ep_audio_w = 0x01, }, [LINE6_PODXTPRO] = { .id = "PODxtPro", .name = "PODxt Pro", .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_MIDI | LINE6_CAP_PCM | LINE6_CAP_HWMON, .altsetting = 5, .ep_ctrl_r = 0x84, .ep_ctrl_w = 0x03, .ep_audio_r = 0x82, .ep_audio_w = 0x01, }, }; /* Probe USB device. */ static int pod_probe(struct usb_interface *interface, const struct usb_device_id *id) { return line6_probe(interface, id, "Line6-POD", &pod_properties_table[id->driver_info], pod_init, sizeof(struct usb_line6_pod)); } static struct usb_driver pod_driver = { .name = KBUILD_MODNAME, .probe = pod_probe, .disconnect = line6_disconnect, #ifdef CONFIG_PM .suspend = line6_suspend, .resume = line6_resume, .reset_resume = line6_resume, #endif .id_table = pod_id_table, }; module_usb_driver(pod_driver); MODULE_DESCRIPTION("Line 6 POD USB driver"); MODULE_LICENSE("GPL"); ddbac3b2739469e373ef424fe6'>sched: rename tcf_destroy to tcf_destroy_protoJiri Pirko2-6/+6 This function destroys TC filter protocol, not TC filter. So name it accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net/sched: act_mirred: remove duplicated include from act_mirred.cWei Yongjun1-2/+0 Remove duplicated include. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-1/+1 Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from sk_buff so we only access one single cacheline in the conntrack hotpath. Patchset from Florian Westphal. 2) Don't leak pointer to internal structures when exporting x_tables ruleset back to userspace, from Willem DeBruijn. This includes new helper functions to copy data to userspace such as xt_data_to_user() as well as conversions of our ip_tables, ip6_tables and arp_tables clients to use it. Not surprinsingly, ebtables requires an ad-hoc update. There is also a new field in x_tables extensions to indicate the amount of bytes that we copy to userspace. 3) Add nf_log_all_netns sysctl: This new knob allows you to enable logging via nf_log infrastructure for all existing netnamespaces. Given the effort to provide pernet syslog has been discontinued, let's provide a way to restore logging using netfilter kernel logging facilities in trusted environments. Patch from Michal Kubecek. 4) Validate SCTP checksum from conntrack helper, from Davide Caratti. 5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly a copy&paste from the original helper, from Florian Westphal. 6) Reset netfilter state when duplicating packets, also from Florian. 7) Remove unnecessary check for broadcast in IPv6 in pkttype match and nft_meta, from Liping Zhang. 8) Add missing code to deal with loopback packets from nft_meta when used by the netdev family, also from Liping. 9) Several cleanups on nf_tables, one to remove unnecessary check from the netlink control plane path to add table, set and stateful objects and code consolidation when unregister chain hooks, from Gao Feng. 10) Fix harmless reference counter underflow in IPVS that, however, results in problems with the introduction of the new refcount_t type, from David Windsor. 11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp, from Davide Caratti. 12) Missing documentation on nf_tables uapi header, from Liping Zhang. 13) Use rb_entry() helper in xt_connlimit, from Geliang Tang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03sched: cls_flower: expose priority to offloading netdeviceJiri Pirko1-0/+3 The driver that offloads flower rules needs to know with which priority user inserted the rules. So add this information into offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net/sched: act_ife: Change to use ife moduleYotam Gigi2-78/+33 Use the encode/decode functionality from the ife module instead of using implementation inside the act_ife. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net/sched: act_ife: Unexport ife_tlv_meta_encodeYotam Gigi1-2/+2 As the function ife_tlv_meta_encode is not used by any other module, unexport it and make it static for the act_ife module. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-85/+48 All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02skbuff: add and use skb_nfct helperFlorian Westphal1-1/+1 Followup patch renames skb->nfct and changes its type so add a helper to avoid intrusive rename change later. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>